Search NASA⌕ Search

Engineering topics

Tole, J. R.

Publications and source records attributed to Tole, J. R..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

In-flight assessment of workload using instrument scan

During instrument flight, the pilot obtains information concerning aircraft state by cross checking or scanning the flight instruments. The exact method of scanning the instrument panel varies from pilot to pilot but there are some basic features common to a good scan pattern. The method discussed may be considered a candidate for workload studies with piloting tasks which will invoke a regular visual scan (spatial/temporal pattern of eye movements) during instrument flight. It is important to point out that instrument scan by itself is not a complete indicator of workload nor is task attention necessarily associated with where the pilot happens to be looking at a particular instant. However, whenever instrument scan is required in a piloting task, analysis of scanning behavior may yield important direct or indirect information concerning workload.

Tole, J. R.↗
NASA NTRS1983

Visual scanning behavior and pilot workload

Sophisticated man machine interaction often requires the human operator to perform a stereotyped scan of various instruments in order to monitor and/or control a system. For situations in which this type of stereotyped behavior exists, such as certain phases of instrument flight, scan pattern was shown to be altered by the imposition of simultaneous verbal tasks. A study designed to examine the relationship between pilot visual scan of instruments and mental workload is described. It was found that a verbal loading task of varying difficulty causes pilots to stare at the primary instrument as the difficulty increases and to shed looks at instruments of less importance. The verbal loading task also affected the rank ordering of scanning sequences. By examining the behavior of pilots with widely varying skill levels, it was suggested that these effects occur most strongly at lower skill levels and are less apparent at high skill levels. A graphical interpretation of the hypothetical relationship between skill, workload, and performance is introduced and modelling results are presented to support this interpretation.

Tole, J. R.↗
NASA NTRS1982

CDTI: Crew Function Assessment

Man machine interaction often requires the operator to perform a sterotyped scan of instruments to monitor and/or control a system. Situations in which this type of behavior exists, such as instrument flight, scan pattern has been shown to be altered by imposition of simultaneous verbal tasks. The relationship between pilot visual scan of instruments and mental workload was described. A verbal loading task of varying difficulty caused pilots to stare at the primary instrument as the difficulty increased and to shed looks at instruments of less importance. The verbal loading task affected rank ordering of scanning sequences. The behavior of pilots with widely varying skill levels suggested that these effects occur most strongly at lower skill levels and are less apparent at high skill levels. Graphical interpretation of the hypothetical relationship between skill, workload, and performance is introduced and modeling results are presented to support this interpretation.

Tole, J. R.↗
NASA NTRS1982

Visual scanning behavior and pilot workload

This paper describes an experimental paradigm and a set of results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary with the difficulty of a verbal mental loading task. The average dwell time of each fixation on the pilot's primary instrument increased with the estimated skill level of the pilots, with novices being affected by the loading task much more than experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Harris, R. L., Sr.↗
NASA NTRS1982

Entropy, instrument scan, and pilot workload

Experimental results are presented from a set of experiments designed to explore the relationship between the performance, skill, and visual scanning behavior of pilots under varying levels of mental workload. Instrument fixations were recorded as groups of pilots with widely differing levels of skill simultaneously performed a continuous instrument flight task and a verbally presented loading task with four discrete levels. Pilot scanning patterns were found to be significantly affected by the level of mental workload in a manner that was dependent on skill. These scanning alterations were quantified by the methods of entropy and autocorrelation, where the former concerns visual scan path and the latter assesses the relations among scan periodicity, skill level and mental task periodicity.

Tole, J. R.↗
NASA NTRS1982

Quantification of pilot workload via instrument scan

The use of visual scanning behavior as an indicator of pilot workload is described. The relationship between level of performance on a constant piloting task under simulated IFR conditions, the skill of the pilot the level of mental workload induced by an additional verbal task imposed on the basic control task, and visual scanning behavior is investigated. An increase in fixation dwell times, especially on the primary instrument with increased mental loading is indicated. Skilled subjects 'stared' less under increased loading than did novice pilots. Sequences of instrument fixations were also examined. The percentage occurrence of the subject's most used sequences decreased with increased task difficulty for novice subjects but not for highly skilled subjects. Entropy rate (bits/sec) of the sequence of fixations was also used to quantify the scan pattern. It consistently decreased for most subjects as the four loading levels used increased.

Tole, J. R.↗
NASA NTRS1982

Visual scanning behavior and mental workload in aircraft pilots

This paper describes an experimental paradigm and a set of preliminary results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary as a function of the level of difficulty of a verbal loading task. The average dwell time of each fixation on the pilot's primary instrument increased as a function of the loading. The scanning behavior was also a function of the estimated skill level of the pilots, with novices being affected by the loading task much more than experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Tole, J. R.↗
NASA NTRS1982

Entropy, instrument scan and pilot workload

Correlation and information theory which analyze the relationships between mental loading and visual scanpath of aircraft pilots are described. The relationship between skill, performance, mental workload, and visual scanning behavior are investigated. The experimental method required pilots to maintain a general aviation flight simulator on a straight and level, constant sensitivity, Instrument Landing System (ILS) course with a low level of turbulence. An additional periodic verbal task whose difficulty increased with frequency was used to increment the subject's mental workload. The subject's looppoint on the instrument panel during each ten minute run was computed via a TV oculometer and stored. Several pilots ranging in skill from novices to test pilots took part in the experiment. Analysis of the periodicity of the subject's instrument scan was accomplished by means of correlation techniques. For skilled pilots, the autocorrelation of instrument/dwell times sequences showed the same periodicity as the verbal task. The ability to multiplex simultaneous tasks increases with skill. Thus autocorrelation provides a way of evaluating the operator's skill level.

Tole, J. R.↗
NASA NTRS1982

How a new instrument affects pilot's mental workload

Display evaluation has generally been performed using reaction time experiments or subjective evaluations to determine which display is better suited for a particular application. A new testing procedure combined with two analysis techniques of scanning behavior have been used to evaluate two alternative display designs in a realistic setting. Tests were conducted in the Langley Research Center's General Aviation Simulator. The results indicated that a new bargraph type of vertical speed indicator located between the attitude indicator and the altimeter is looked at more quickly, appears to lower cognitive workload slightly, and was preferred over a conventional vertical speed indicator.

Harris, R. L., Sr.↗
NASA NTRS1981

Visual scanning behavior and pilot workload

An experimental paradigm and a set of results which demonstrate a relationship between the level of performance on a skilled man-machine control task, the skill of the operator, the level of mental difficulty induced by an additional task imposed on the basic control task, and visual scanning performance. During a constant, simulated piloting task, visual scanning of instruments was found to vary as a function of the level of difficulty of a verbal mental loading task. The average dwell time of each fixation on the pilot's primary instrument increased as a function of the estimated skill level of the pilots, with novices being affected by the loading task much more than the experts. The results suggest that visual scanning of instruments in a controlled task may be an indicator of both workload and skill.

Harris, R. L., Sr.↗
NASA NTRS1980

Instrument scan - Is it an indicator of the pilot's workload

Results of an investigation of the relationship between an aircraft pilot's visual scanning of instruments and the level of mental activity during a simulated approach and landing are presented. Noting that periods of activity which demand either close to 100% of human capacity or low levels of capacity are the times when most errors are committed, trials were conducted with three NASA test pilots in a terminal configured vehicle simulator. The pilots flew a normal approach while verbally responding to three digit stimuli to be judged plus or minus according to an order of magnitude scheme, and also while using a control stick to extinguish a light that came on and off to the right and left of the instrument panel. Eyescans of the instrumentation were monitored, and determinations were made of the most common instruments used during approach and flare. Fixation on instruments was found to increase with the arithmetic tasks.

Ephrath, A. R.↗
NASA NTRS1979

A fast-reacting and versatile optokinetic stimulus pattern by computer graphics with application examples

A computer graphics method for the generation of horizontally moving vertical stripes which serve as stimuli for optokinetic nystagmus is presented. The pattern is generated by the successive addition of a constant in a digital register, leading to its periodic overflow. Digital to analog conversion of the register contents results in a staircase waveform, which is converted into a pattern of vertical lines on a CRT. The addition of any number to the reference buffer shifts all lines uniformly, so that the group velocity of the pattern is easily controlled. The computer controlled display allows an accurate realization of a commanded velocity profile with practically no time delay and facilitates study under conditions of variable feedback. The display software can be easily modified to limit stimulation to a selected area of the moving retina, and the method has been used to simulate central scotomata. It is pointed out that the technique, while more accurate, versatile and responsive than a rotating drum device, may be less useful in experiments requiring a wide field display.

Yasui, S.↗
NASA NTRS1975

MITNYS-II - A digital program for on-line analysis of nystagmus

A digital computer program, MITNYS-II, has been developed for on-line analysis of nystagmus which results from visual, vestibular or caloric stimulation. The program accepts sampled records of eye position and yields cumulative slow phase position, slow phase velocity, instantaneous fast phase frequency and other parameters in 25 ms. In this paper the algorithms by which fast phases are detected, and by which slow phase cumulative eye position is extrapolated across the fast phase interval are described. Extensive tests with vestibular, optokinetic and caloric nystagmus yield reliability figures of the order of 2% for false identification of fast phases and missed fast phases. MITNYS-II has been successfully employed to interpret clinical EOG records, examples of which are presented.

Allum, J. H. J.↗
NASA NTRS1973

Automated nystagmus analysis

Several methods have recently been used for on-line analysis of nystagmus: A digital computer program has been developed to accept sampled records of eye position, detect fast phase components, and output cumulative slow phase position, continuous slow phase velocity, instantaneous fast phase frequency, and other parameters. The slow phase velocity is obtained by differentiation of the calculated cumulative position rather than the original eye movement record. Also, a prototype analog device has been devised which calculates the velocity of the slow phase component during caloric testing. Examples of clinical and research eye movement records analyzed with these devices are shown.

Oman, C. M.↗