Search NASA⌕ Search

Engineering topics

Tom, Nathan

Publications and source records attributed to Tom, Nathan.

At least 37 records · Page 2

TEAMER - AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Test Logs and Results

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of a utility scale wave energy converter (WEC). SNL and NREL in collaboration with AquaHarmonics, will set up and run WEC Simulator (WEC-Sim) models of the AquaHarmonics WEC, building off past model developments for inclusion of custom PTO (power take-off) dynamics. The intent is to review, update, and verify or validate a new WEC-Sim model against wave tank experimental data. Furthermore, the WEC-Sim model will be coupled to an energy storage system model to better understand the wave-to-wire functionality. This data set is described in the "Test Log" excel file. Please refer to that document for details on each specific test date/time, constraint parameters and model hardware setup details. Sim model can be found in the associated MHKDR link below.

16 TIDAL AND WAVE POWER↗

Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun

High-repetition-rate electron sources have widespread applications. This contribution discusses the progress toward a proof-of-principle demonstration for a conduction-cooled electron source. The source consists of a simple modification of an elliptical cavity that enhances the field electric field at the photocathode surface. The source was cooled to cryogenic temperatures and preliminary measurements for the quality factor and accelerating field were performed. Additionally, we present future plans to improve the source along with simulated beam-dynamics performances.

43 PARTICLE ACCELERATORS↗

Annual Performance of the Second-Generation Variable-Geometry Oscillating Surge Wave Energy Converter

Recent studies in wave energy have highlighted the need for a structured innovation approach in wave energy converter (WEC) design because cost-of-energy estimates have remained high. One specific innovation being investigated by the National Renewable Energy Laboratory is WEC geometry control, which uses control surfaces in combination with an oscillating surge WEC (OSWEC) to increase device availability and power generation while limiting structural costs. This study performs the first analysis of annual performance for a novel OSWEC with geometry control to understand how the geometry control affects availability, annual power generation, and structural loadings like the power-take-off (PTO) torque or surge foundation force. Device hydrodynamic coefficients are calculated using linear potential theory for six geometry configurations. A nonideal PTO system is assumed and quadratic viscous damping losses are considered. Annual performance is evaluated and compared for three U.S. wave energy sites. The WEC geometry and PTO system are controlled on a sea-state basis to optimize for power capture while remaining under limits set on motion amplitude and structural loads. Results indicate that geometry control can increase availability up to 25 days in an average year depending on design limits, increase average power generation, and significantly reduce peak structural loads.

30 DIRECT ENERGY CONVERSION↗

Wave energy conversion incorporating actuated geometry

Described herein are wave energy conversion systems including actuated geometry components. An example system may include at least one body portion configured to transfer wave energy to a power take off device, and at least one actuated geometry component that is connected to the at least one body portion, the at least one actuated geometry component operable to modify a geometric profile of the system.

16 TIDAL AND WAVE POWER↗

WEC fault modelling and condition monitoring: A graph-theoretic approach

The nature of wave resources usually requires wave energy converter (WEC) components to handle peak loads (i.e., torques, forces, and powers) that are many times greater than their average loads, accelerating equipment degradation. Moreover, due to their isolated nature and harsh operating environment, WEC systems are projected to possess high operations and maintenance (O&M) cost, i.e., around 27% of their leveled cost of energy. As such, developing techniques to mitigate these costs through the application of condition monitoring and fault tolerant control will significantly impact the economic feasibility of grid connected WEC power. Toward this goal, models of faulty components are developed in the open source modeling platform, WEC-Sim, to estimate the performance and measurable states of a WEC operating with likely device and sensor failures. Two types of faulty component models are then applied to a point absorber WEC model with basic controller damping and spring forces. Resulting changes in device behavior are recorded as a benchmark, and a graph-theoretic approach is proposed for fault detection and identification utilizing multivariate time series. Simulation results demonstrate that these faults can greatly affect the WEC performance, and that the proposed method can effectively detect and classify different types of faults.

16 TIDAL AND WAVE POWER↗

Experimental and numerical comparisons of a dual-flap floating oscillating surge wave energy converter in regular waves

The floating oscillating surge wave energy converter (FOSWEC) is a wave energy converter that was designed, built, and tested to develop an open-access data set for the purpose of numerical model validation. Here, this paper details the experimental testing of the 1:33-scale FOSWEC in a directional wave basin, and compares experimental data to numerical simulations using the wave energy converter simulator (WEC-Sim) open-source code. The FOSWEC consists of a floating platform moving in heave, pitch, and surge, and two pitching flaps. Power is extracted through relative motion between each of the flaps and the platform. The device was designed to constrain different degrees of freedom so that it could be configured into a variety of operating conditions with varying dynamics. The FOSWEC was tested in a range of different conditions including: static offset, free decay, forced oscillation, wave excitation, and dynamic response to regular waves. In this paper, results from the range of experimental tests are presented and compared to numerical simulations using the WEC-Sim code.

16 TIDAL AND WAVE POWER↗

Model Predictive Control of a Wave Energy Converter Using Duality Techniques

In this paper, a method for implementing model predictive control for vibration energy harvesting systems with the goal of maximizing generated energy is presented. This is generally a nonconvex problem, which can be computationally expensive and converging to a global minimum cannot be guaranteed. We introduce a dual-domain method to relax the nonconvex primal problem into a convex dual optimization problem, which can be performed in real time. Based on previous work, we determine when the duality gap is zero and, by extension, whether the global optimal primal solution is found. Here, we demonstrate the algorithm on a single, buoy-type wave energy converter with energy storage constraints and power take-off force constraints.

16 TIDAL AND WAVE POWER↗

Parametric modelling of a reconfigurable wave energy device

To date, one of the difficulties with wave energy devices is modulating the power transfer from the waves to the generator. In wind turbines, this is achieved by turbine pitch control, leading to the ubiquitous flat power curve. Recently, a wave energy converter, having moveable vanes, has been developed by the National Renewable Energy Laboratory (NREL) in the US. Furthermore, this paper described the development of a compact hydrodynamic model for the NREL device, based on multiple linear hydrodynamic modelling (Murray-Smith and Johansen, 1997), which can be used to model the hydrodynamic behaviour of the device across its full operational spectrum of vane angles. To show the utility of the model, we demonstrate a flat power curve for the WEC, using the vane angles as a control input.

16 TIDAL AND WAVE POWER↗

Wave energy conversion incorporating actuated geometry

Described herein are wave energy conversion systems including actuated geometry components. An example system may include at least one body portion configured to transfer wave energy to a power take off device, and at least one actuated geometry component that is connected to the at least one body portion, the at least one actuated geometry component operable to modify a geometric profile of the system.

Thresher, Robert↗

Balancing Power Absorption Against Structural Loads With Viscous Drag and Power-Takeoff Efficiency Considerations

The focus of this paper is to balance power absorption against structural loading for a novel fixed-bottom oscillating surge wave energy converter in both regular and irregular wave environments. The power-to-load ratio will be evaluated using pseudospectral control (PSC) to determine the optimum power-takeoff (PTO) torque based on a multiterm objective function. This paper extends the pseudospectral optimal control problem to not just maximize the time-averaged absorbed power but also include measures for the surge-foundation force and PTO torque in the optimization. The objective function may now potentially include three competing terms that the optimizer must balance. Separate weighting factors are attached to the surge-foundation force and PTO control torque that can be used to tune the optimizer performance to emphasize either power absorption or load shedding. To correct the pitch equation of motion, derived from linear hydrodynamic theory, a quadratic-viscous-drag torque has been included in the system dynamics; however, to continue the use of quadratic programming solvers, an iteratively obtained linearized drag coefficient was utilized that provided good accuracy in the predicted pitch motion. Furthermore, the analysis considers the use of a nonideal PTO unit to more accurately evaluate controller performance. The PTO efficiency is not directly included in the objective function but rather the weighting factors are utilized to limit the PTO torque amplitudes, thereby reducing the losses resulting from the bidirectional energy flow through a nonideal PTO. Furthermore, results from PSC show that shedding a portion of the available wave energy can lead to greater reductions in structural loads, peak-to-average power ratio, and reactive power requirement.

16 TIDAL AND WAVE POWER↗

WEC-Sim Wave Energy Converter Simulator

WEC-Sim (Wave Energy Converter SIMulator) is an open-source wave energy converter (WEC) simulation tool. The code is developed in MATLAB/SIMULINK using the multi-body dynamics solver SimMechanics. WEC-Sim has the ability to model devices that are comprised of rigid bodies, power-take-off systems, and mooring systems. Simulations are performed in the time-domain by solving the governing WEC equations of motion in 6 degrees-of-freedom. The WEC-Sim project is funded by the U.S. Department of Energy's Wind and Water Power Technologies Office and the code development effort is a collaboration between the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories (SNL).

13 HYDRO ENERGY↗

Preliminary Analysis of an Oscillating Surge Wave Energy Converter with Controlled Geometry: Preprint

The aim of this paper is to present a novel wave energy converter device concept that is being developed at the National Renewable Energy Laboratory. The proposed concept combines an oscillating surge wave energy converter with active control surfaces. These active control surfaces allow for the device geometry to be altered, which leads to changes in the hydrodynamic properties. The device geometry will be controlled on a sea state time scale and combined with wave-to-wave power-take-off control to maximize power capture, increase capacity factor, and reduce design loads. The paper begins with a traditional linear frequency domain analysis of the device performance. Performance sensitivity to foil pitch angle, the number of activated foils, and foil cross section geometry is presented to illustrate the current design decisions; however, it is understood from previous studies that modeling of current oscillating wave energy converter designs requires the consideration of nonlinear hydrodynamics and viscous drag forces. In response, a nonlinear model is presented that highlights the shortcomings of the linear frequency domain analysis and increases the precision in predicted performance.

17 WIND ENERGY↗