Engineering topics

Tomita, C. Y.

Publications and source records attributed to Tomita, C. Y..

4 records

NASA NTRS1980

Ionospheric effects in active retrodirective array and mitigating system design

The operation of an active retrodirective array (ARA) in an ionospheric environment (that is either stationary or slowly-varying) was examined. The restrictions imposed on the pilot signal structure as a result of such operation were analyzed. A 3 tone pilot beam system was defined which first estimates the total electron content along paths of interest and then utilizes this information to aid the phase conjugator so that correct beam pointing can be achieved.

Nandi, A. K.↗

NASA NTRS1980

The Resonant Cavity Radiator (RCR)

The design of the resonant cavity radiator (RCR) is compared to that of the slotted waveguide array in terms of efficiency, weight, and structural integrity. It is shown that the RCR design has three significant potentials over the slotted waveguide array: (1) improvement in efficiency; (2) lighter weight; and (3) simpler structure which allows the RCR to be integrated with the RF tube to alleviate thermal interface problems.

Schroeder, K. G.↗

NASA NTRS1980

Ionospheric effects in active retrodirective array and mitigating system design

The operation of an active retrodirective array (ARA) in an ionospheric environment (that is either stationary or slowly-varying) was examined. The restrictions imposed on the pilot-signal structure as a result of such operation are analyzed. A 3-tone pilot beam system is defined which first estimates the total electron content along paths of interest and then utilizes this information to aid the phase conjugator so that correct beam pointing can be achieved.

Nandi, A. K.↗

NASA NTRS1980

The Resonant Cavity Radiator (RCR)

The fundamental theory of MW antenna operation and basic array technology development status was used in the design of the 1-km diameter 5-Gw SPS microwave antenna. However, the aperture size and the high efficiency requirements make the MW antenna extremely complex. Studies show that the slotted waveguide array is one of the most efficient radiators for the antenna. Subsequent analyses show that the temperature interface between waveguides and dc-RF conversion tubes can cause severe thermal design problems on the array. An alternate design, the Resonant Cavity Radiator, is described here.

Schroeder, K. G.↗