Search NASA⌕ Search

Engineering topics

Torres, Richard A.

Publications and source records attributed to Torres, Richard A..

Intercomparison of the Radio-Chronometric Ages of Plutonium-Certified Reference Materials with Distinct Isotopic Compositions

In this article, an intercomparison of the radio-chronometric ages of four distinct plutonium-certified reference materials varying in chemical form, isotopic composition, and period of production are presented. The cross-comparison of the different 234 U/ 238 Pu, 235 U/ 239 Pu, 236 U/ 240 Pu, and 241 Am/ 241 Pu model purification ages obtained at four independent analytical facilities covering a range of laboratory environments from bulk sample processing to clean facilities dedicated to nuclear forensic investigation of environmental samples enables a true assessment of the state-of-practice in “age dating capabilities” for nuclear materials. The analytical techniques evaluated used modern mass spectrometer instrumentation including thermal ionization mass spectrometers and inductively coupled plasma mass spectrometers for isotopic abundance measurements. Both multicollector and single collector instruments were utilized to generate the data presented here. Consensus values established in this study make it possible to use these isotopic standards as quality control standards for radio-chronometry applications. Results highlight the need for plutonium isotopic standards that are certified for 234 U/ 238 Pu, 235 U/ 239 Pu, 236 U/ 240 Pu, and 241 Am/ 241 Pu model purification ages as well as other multigenerational radio-chronometers such as 237 Np/ 241 Pu. Due to the capabilities of modern analytical instrumentation, analytical laboratories that focus on trace level analyses can obtain model ages with marginally larger uncertainties than laboratories that handle bulk samples. Lastly, when isotope ratio measurement techniques like thermal ionization mass spectrometry and inductively coupled plasma mass spectrometry with comparable precision are utilized, model purification ages with similar uncertainties are obtained.

36 MATERIALS SCIENCE↗

Microstructural characterization of plutonium oxalate and oxide particles by three-dimensional focused ion beam tomography

Focused ion beam (FIB) tomography was used to characterize three-dimensional (3D) internal microstructures of plutonium oxalate and oxide particles. Sequential two-dimensional (2D) sectioning and imaging using FIB and 3D image reconstruction were used to elucidate and distinguish internal pore microstructure and distribution in plutonium oxide particles calcined from plutonium oxalate precipitates. The results show that the plutonium oxide particles have a significant increase in pore volume fraction while retaining the exterior morphological shape of the corresponding oxalate precipitates. This technique enables the examination of the internal structure of radioactive microparticles for nuclear forensics that is not available with conventional microscopy.

36 MATERIALS SCIENCE↗

A case study in plutonium radiochronometry using multiple isotope systems

In this work, radiochronometry analyses of two Pu metals were performed using the 237 Np– 241 Am– 241 Pu, 234 U– 238 Pu, 235 U– 239 Pu, and 236 U–240Pu decay series. For one sample, all radiochronometers yield concordant model dates in 1959–1960, suggesting that the aqueous processing method used to purify Pu effectively removed U, Am and Np decay products from the bulk Pu. The second sample yields discordant model dates that are also older than the known production date in 1982. The excess U, Am and Np present in the sample imply that the sample was purified during at least two different episodes, using a combination of aqueous methods and molten salt extraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exploratory Pu(III) Oxalate/Pu(IV) Oxide Morphology Studies

Exploratory experiments were performed to see if morphological information (particle- size/habit) about PuO 2 might give useful information about growth conditions for its oxalate precursor. We performed experiments with trivalent Pu and its analogue, trivalent cerium (Ce). Movies of the Ce oxalate experiments showed that solution turbidities can be a useful monitor for the precipitation kinetics. It was clear that when mixing was too slow to keep up with oxalic acid addition, precipitates formed locally, and partially re-dissolved when oxalic addition was complete. The Ce oxalate and oxide particle-sizes determined in liquid slurries by traditional light-scattering instrumentation agreed in general with those found by SEM imaging. The Ce oxalate size distributions depended on the synthesis conditions, but it was not monotonic in the progression from best- to worst-mixed. Uniformity, as measured by the FWHM (full width at half maximum) of the distributions, varied by a factor of two or more. Because the distributions and FWHMs did not change monotonically as synthesis conditions changed from best- to worst-mixed, the utility of the size distributions for Ce as a diagnostic is doubtful.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗