Search NASA⌕ Search

Engineering topics

Truong, T. T.

Publications and source records attributed to Truong, T. T..

NASNF Processing and Packaging Technical Study

The ABD program will require development of a strategy for the dispositioning the Non-Aluminum Spent Nuclear Fuel (NASNF), some of which will be very challenging to handle and dissolve as described in this report. Not all the NASNF is suitable for processing through the electrolytic dissolver. The strategy may involve dissolution of the majority of the NASNF inventory in the electrolytic dissolver combined with some other disposition alternative(s) for the fraction that is not suitable for electrolytic dissolution. This report highlights the risks and challenges associated with the baseline approach of using the electrolytic dissolver to process all of the NASNF. In addition, the characteristics of the NASNF and how those characteristics relate to the risks associated with electrolytically dissolving the specific fuel types.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FY2018 Status Report: Model 9975 O-Ring Fixture Long-Term Leak Performance

A series of experiments to monitor the aging performance of Viton® GLT and GLT-S O-rings used in the Model 9975 shipping package has been ongoing since 2004 at the Savannah River National Laboratory. One approach has been to periodically evaluate the leak performance of O-rings being aged in mock-up 9975 Primary Containment Vessels (PCVs) at elevated temperature. Other methods such as compression stress-relaxation (CSR) tests and field surveillance are also on going to evaluate O-ring behavior. Seventy tests using PCV mock-ups with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 ºF. They were leak-tested initially and have been tested periodically to determine if they continue to meet the leak-tightness criterion defined in ANSI standard N14.5-97. Due to material substitution, a smaller test matrix with fourteen additional tests was initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 ºF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Examination of Shipping Package 9975-04194

In December 2017, K-Area personnel attempted to open package 9975-04194 to remove its contents. The upper fiberboard assembly could not be initially removed due to an interference fit that had developed against the lead shield. Corrosion of the shield created two specific conditions that caused this interference. First, there was widespread heavy blisters over the shield surface. Corrosion of the lead under the surface (associated with porosity in the as-cast shield which is open to the surface) appears to have caused the blisters to form. Second, corrosion also formed in a gap between the lead shield and the internal stainless steel liner, pushing the top edge of the shield outward into the upper fiberboard assembly. In both cases, portions of the shield are pushed outward since the corrosion product occupies a greater volume than the metallic lead it replaced.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Compression Stress-Relaxation and Oxygen Consumption Behavior of 9975 Shipping Package O-rings

The 9975 shipping package is used within the DOE complex for shipping special nuclear materials. The shipping packages are currently approved for up to 20 years storage in K-Area Complex (KAC) and work continues to provide technical basis to extend that period. Several techniques have been used at Savannah River National Laboratory to monitor the aging performance of Viton ® GLT or GLT-S fluoroelastomer O-rings. These experiments all involve accelerated aging of the O-ring samples at elevated temperatures. This report describes efforts to extend the service life estimate of GLT and GLT-S O-rings used in the 9975 shipping package.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Status Report - Fiberboard Properties and Degradation Rates for Storage of the 9975 Shipping Package in KAC

Thermal, mechanical and physical properties have been measured on fiberboard samples following accelerated aging for up to approximately 12 years. The aging environments include elevated temperature up to 250 ºF (the maximum allowed service temperature for fiberboard in 9975 packages) and elevated humidity. The results from this testing have been analyzed, and aging models fit to the data. Correlations relating several properties (thermal conductivity, energy absorption, weight, dimensions and density) to their rate of change in potential storage environments have been developed. Combined with an estimate of the actual conditions the fiberboard experiences in KAC, these models allow development of service life predictions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Nanopost plasmonic crystals

We describe a class of plasmonic crystal that consists of square arrays of nanoposts formed by soft nanoimprint lithography. As sensors, these structure show somewhat higher bulk refractive index sensitivity for aqueous solutions in the visible wavelength range as compared to plasmonic crystals consisting of square arrays of nanowells with similar dimensions, with opposite trends for the case of surface bound layers in air. Furthermore, three-dimensional finite-difference time-domain simulations quantitatively capture the key features and assist in the interpretation of these and related results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗