Search NASA⌕ Search

Engineering topics

Tsang, Chin-Fu

Publications and source records attributed to Tsang, Chin-Fu.

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The DECOVALEX international collaboration on modeling of coupled subsurface processes and its contribution to confidence building in radioactive waste disposal

Abstract The long-lived radiotoxicity of the high-level radioactive waste generated by nuclear power plants requires safe isolation from the biosphere for many hundreds of thousands of years. An international consensus has emerged that such isolation can best be provided by disposal in mined geologic repositories, a strategy that today is pursued by most countries dealing with radioactive waste. However, the need to predict the performance of such repositories over very long time periods generates large uncertainties that have to be accounted for in safety assessments. The findings from such safety assessments need to be conveyed to all stakeholders in a clear way, such that public confidence in geologic disposal solutions can be achieved. It is suggested here that close international collaboration on the technical aspects of geologic waste disposal has helped, and will continue to help, building trust and increasing confidence. This paper discusses a particular international collaboration initiative referred to as DECOVALEX, which brings together multiple teams and disciplines to collectively tackle complex experimental and modeling challenges related to geologic disposal. By describing how DECOVALEX works and by providing joint research examples, a case is made that such international collaboration contributes to knowledge transfer and confidence building in radioactive waste disposal science.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Corrigendum to study of hydraulic fracturing processes in shale formations with complex geological settings, Journal of petroleum science and engineering 152 (2017) 361–374

In the paper already published, there is an error in the acknowledgements. The grant number concerning EU project is 636811 instead of 640979. There was a misunderstanding with the EU project number and we only found that after those papers are published. We confirm that the correction is to be made online and we also want to publish a corrigendum. The corrected text should be: The authors regret . “The authors gratefully acknowledge the Swedish Geological Survey (SGU), grant number 1724, and the EU project Fracrisk grant number 636811, for providing financial support to research reported in this paper. Additional support was provided by the U.S. Department of Energy under contract No. DE-AC02-05CH11231.” The authors would like to apologise for any inconvenience caused.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2018

Corrigendum to “The effects of nearby fractures on hydraulically induced fracture propagation and permeability changes” [Eng. Geol. 228 (2017) 197–213]

The authors regret the error regarding the grant number in the acknowledgements in the paper already published. The grant number concerning EU project is 636811 instead of 640979. There was a misunderstanding with the EU project number and we only found that after those papers are published. The corrected text should be: “The authors gratefully acknowledge the Swedish Geological Survey (SGU), grant number 1724, and the EU project Fracrisk grant number 636811, for providing financial support to research reported in this paper. Additional support was provided by the U.S. Department of Energy under contract No. DE-AC02-05CH11231.” The authors would like to apologise for any inconvenience caused.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2017

The effects of nearby fractures on hydraulically induced fracture propagation and permeability changes

Fracture propagation caused by hydraulic fracturing operations can be significantly influenced by adjacent fractures. In this paper, we present a detailed coupled hydro-mechanical analysis to study the effects of nearby natural fractures on hydraulically induced fracture propagation and changes in fracture permeability. Two rock domains were considered in comparison: FD1, with one fracture, and FD2, with two adjacent parallel or non-parallel fractures. It was assumed that water injection occurred in a borehole that intersected the single fracture in FD1 and one of the two fractures in FD2. Simulations were made for a time period of 3 h with an injection period of 2 h followed by 1 h of shut-in. An elastic-brittle model based on the degradation of material properties was implemented in a 2D finite-difference scheme and used for elements of the intact rock subjected to tension and shear failure. The intact rock was considered to have a low but non-negligible permeability. A verification study against analytical solutions showed that the fracture propagation and stress concentrations due to differential boundary stresses could be accurately represented by our model. Next, a base case was considered, in which the stress ratio (SR) between the magnitudes of the maximum and minimum boundary stresses, the permeability k R of the intact rock and the initial permeability k TF of the tension failure regions were fixed. In FD2, the distance d F between the two natural fractures defined by the closest distance was also fixed. The results showed that in both rock domains, the fracture started to propagate when the pore pressure was approximately 85% of the magnitude of the minimum boundary stress. The propagation of a single fracture was significantly greater than the propagation of a double fracture system because, in the latter case, the pore pressure decreased when the two fractures connected. As a result, changes in permeability in FD2 were smaller than in FD1. At the end of injection, the maximum ratios between the final and initial permeability of the natural fractures were found to be approximately 3 and 2 for rock domains FD1 and FD2, respectively. For non-parallel fractures, the controlling factor for fracture propagation was the separation between the tips of the pressurised fracture and the neighbouring non-pressurised fracture. A sensitivity study was conducted to study the influence of the key parameters d F , SR, k R and k TF on the simulation results. Lastly, fracture propagation showed more sensitivity to dF and SR than to the other parameters.

58 GEOSCIENCES↗
DOE OSTI2017

Study of hydraulic fracturing processes in shale formations with complex geological settings

Hydraulic fracturing has been applied to extract gas from shale-gas reservoirs. Complicated geological settings, such as spatial variability of the rock mass properties, local heterogeneities, complex in situ stress field, and pre-existing bedding planes and faults, could make hydraulic fracturing a challenging task. In order to effectively and economically recover gas from such reservoirs, it is crucial to explore how hydraulic fracturing performs in such complex geological settings. For this purpose, numerical modelling plays an important role because such conditions cannot be reproduced by laboratory experiments. This study focuses on the analysis of the influence of confining formations and pre-existing bedding planes and faults on the hydraulically-induced propagation of a vertical fracture, which will be called injection fracture, in a shale-gas reservoir. An elastic-brittle model based on material property degradation was implemented in a 2D finite-difference scheme and used for rock elements subjected to tension and shear failure. A base case is considered, in which the ratio SR between the magnitudes of the horizontal and vertical stresses, the permeability k c of the confining formations, the elastic modulus E p and initial permeability k p of the bedding plane and the initial fault permeability k F are fixed at reasonable values. In addition, the influence of multiple bedding planes, is investigated. Changes in pore pressure and permeability due to high pressure injection lasting 2 h were analysed. Results show that in our case during the injection period the fracture reaches the confining formations and if the permeability of those layers is significantly larger than that of the shale, the pore pressure at the extended fracture tip decreases and fracture propagation becomes slower. After shut-in, the pore pressure decreases more and the fracture does not propagate any more. For bedding planes oriented perpendicular to the maximum principal stress direction and with the same elastic properties as the shale formation, results were found not to be influenced by their presence. In such a scenario, the impact of multiple bedding planes on fracture propagation is negligible. On the other hand, a bedding plane softer than the surrounding shale formation leads to a fracture propagation asymmetrical vertically with respect to the centre of the injection fracture with a more limited upward fracture propagation. A pre-existing fault leads to a decrease in fracture propagation because of fault reactivation with shear failure. This results in a smaller increase in injection fracture permeability and a slight higher injection pressure than that observed without the fault. Results of a sensitivity analysis show that fracture propagation is influenced by the stress ratio SR, the permeability k c of the confining formations and the initial permeability k p of the bedding plane more than the other major parameters.

58 GEOSCIENCES↗
DOE OSTI2016

Flowing fluid electrical conductivity logging of a deep borehole during and following drilling: estimation of transmissivity, water salinity and hydraulic head of conductive zones

Flowing fluid electrical conductivity (FFEC) logging is a hydrogeologic testing method that is usually conducted in an existing borehole. However, for the 2,500-m deep COSC-1 borehole, drilled at Åre, central Sweden, it was done within the drilling period during a scheduled 1-day break, thus having a negligible impact on the drilling schedule, yet providing important information on depths of hydraulically conductive zones and their transmissivities and salinities. In this paper, we present a reanalysis of this set of data together with a new FFEC logging data set obtained soon after drilling was completed, also over a period of 1 day, but with a different pumping rate and water-level drawdown. Their joint analysis not only results in better estimates of transmissivity and salinity in the conducting fractures intercepted by the borehole, but also yields the hydraulic head values of these fractures, an important piece of information for the understanding of hydraulic structure of the subsurface. Two additional FFEC logging tests were done about 1 year later, and are used to confirm and refine this analysis. Results show that from 250 to 2,000 m depths, there are seven distinct hydraulically conductive zones with different hydraulic heads and low transmissivity values. For the final test, conducted with a much smaller water-level drawdown, inflow ceased from some of the conductive zones, confirming that their hydraulic heads are below the hydraulic head measured in the wellbore under non-pumped conditions. Lastly, the challenges accompanying 1-day FFEC logging are summarized, along with lessons learned in addressing them.

58 GEOSCIENCES↗
DOE OSTI2016

Deep Borehole Field Test Research Activities at LBNL

The goal of the U.S. Department of Energy Used Fuel Disposition’s (UFD) Deep Borehole Field Test is to drill two 5 km large-diameter boreholes: a characterization borehole with a bottom-hole diameter of 8.5 inches and a field test borehole with a bottom-hole diameter of 17 inches. These boreholes will be used to demonstrate the ability to drill such holes in crystalline rocks, effectively characterize the bedrock repository system using geophysical, geochemical, and hydrological techniques, and emplace and retrieve test waste packages. These studies will be used to test the deep borehole disposal concept, which requires a hydrologically isolated environment characterized by low permeability, stable fluid density, reducing fluid chemistry conditions, and an effective borehole seal. During FY16, Lawrence Berkeley National Laboratory scientists conducted a number of research studies to support the UFD Deep Borehole Field Test effort. This work included providing supporting data for the Los Alamos National Laboratory geologic framework model for the proposed deep borehole site, conducting an analog study using an extensive suite of geoscience data and samples from a deep (2.5 km) research borehole in Sweden, conducting laboratory experiments and coupled process modeling related to borehole seals, and developing a suite of potential techniques that could be applied to the characterization and monitoring of the deep borehole environment. The results of these studies are presented in this report.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

A study of changes in deep fractured rock permeability due to coupled hydro-mechanical effects

This paper presents a numerical study of the hydro-mechanical behaviour of a fractured rock domain at 1000. m depth below the land surface as a function of different levels of fluid pore pressure. A 2D fractured rock domain is adopted based on data obtained from outcrop mapping, displaying multiple fracture sets, fracture intersections, dead-end and curved fractures. A continuum based numerical model is used to evaluate the effects of compressive boundary stresses, cracking by tension failure in the intact rock and fractures and shear displacement along fractures on its equivalent permeability. Two in situ stress boundary conditions are considered: an isotropic case SR1 with the two horizontal boundary compressive stresses having the same magnitude, and an anisotropic case SR2 with the ratio between these compressive stress components set to be 2. In the SR2 case, changes in the local stress and stress ratio distributions due to different fluid pore pressure levels are anisotropic and more significant than in the SR1 case, because of tension failures in the intact rock forming bridges between fractures. These failure regions opened new flow connections between fractures and thereby caused important anisotropic changes in the flow paths, and significant decrease in local gradients of fluid pore pressure. The equivalent permeability increases sharply when the fluid pore pressure is approximately 90% of the magnitude of the minimum stress at the boundaries of the fractured rock domain. Results show that the equivalent permeability of the fractured rock domain is most sensitive to the fractures normal stiffness, the permeability of the tension failure regions and the power-law exponent for permeability change.

58 GEOSCIENCES↗
DOE OSTI2011

Disposal systems evaluations and tool development : Engineered Barrier System (EBS) evaluation.

Key components of the nuclear fuel cycle are short-term storage and long-term disposal of nuclear waste. The latter encompasses the immobilization of used nuclear fuel (UNF) and radioactive waste streams generated by various phases of the nuclear fuel cycle, and the safe and permanent disposition of these waste forms in geological repository environments. The engineered barrier system (EBS) plays a very important role in the long-term isolation of nuclear waste in geological repository environments. EBS concepts and their interactions with the natural barrier are inherently important to the long-term performance assessment of the safety case where nuclear waste disposition needs to be evaluated for time periods of up to one million years. Making the safety case needed in the decision-making process for the recommendation and the eventual embracement of a disposal system concept requires a multi-faceted integration of knowledge and evidence-gathering to demonstrate the required confidence level in a deep geological disposal site and to evaluate long-term repository performance. The focus of this report is the following: (1) Evaluation of EBS in long-term disposal systems in deep geologic environments with emphasis on the multi-barrier concept; (2) Evaluation of key parameters in the characterization of EBS performance; (3) Identification of key knowledge gaps and uncertainties; and (4) Evaluation of tools and modeling approaches for EBS processes and performance. The above topics will be evaluated through the analysis of the following: (1) Overview of EBS concepts for various NW disposal systems; (2) Natural and man-made analogs, room chemistry, hydrochemistry of deep subsurface environments, and EBS material stability in near-field environments; (3) Reactive Transport and Coupled Thermal-Hydrological-Mechanical-Chemical (THMC) processes in EBS; and (4) Thermal analysis toolkit, metallic barrier degradation mode survey, and development of a Disposal Systems Evaluation Framework (DSEF). This report will focus on the multi-barrier concept of EBS and variants of this type which in essence is the most adopted concept by various repository programs. Empasis is given mainly to the evaluation of EBS materials and processes through the analysis of published studies in the scientific literature of past and existing repository research programs. Tool evaluations are also emphasized, particularly on THCM processes and chemical equilibria. Although being an increasingly important aspect of NW disposition, short-term or interim storage of NW will be briefly discussed but not to the extent of the EBS issues relevant to disposal systems in deep geologic environments. Interim storage will be discussed in the report Evaluation of Storage Concepts FY10 Final Report (Weiner et al. 2010).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗