Engineering topics

Tsapatsis, Michael

Publications and source records attributed to Tsapatsis, Michael.

At least 19 records

DOE OSTI2026

Gas permeation properties of amorphous zeolitic imidazolate framework membranes made by atomic/molecular layer deposition

Amorphous metal-organic framework (MOF) membranes are desirable because they may retain some of the molecular sieving properties of their crystalline counterparts while being free of grain boundary defects, which often hinder the consistent achievement of high membrane performance. However, current methods, like melting and compression, for fabricating amorphous MOF membranes involve multi-step processes that require the formation of a crystalline membrane first, that is then amorphized, and therefore, could be challenging to scale. Here, we utilize atomic/molecular layer deposition (ALD/MLD) of diethylzinc (DEZ) and 2-methylimidazole (2mIm) to directly synthesize ultrathin amorphous zeolitic imidazolate framework (aZIF) deposits on γ-alumina-coated α-alumina supports. As the number of ALD/MLD cycles increased from 10 to 300, gas permeances decreased while ideal selectivities increased. Mixture separation factors for C3H6/C3H8, CO2/N2, and H2/C3H8 as high as 4, 37, and 194, respectively, were obtained. At 200 °C and 2.5 bar equimolar feed of H2 and C3H8, a H2/C3H8 mixture separation factor of 185 is obtained with an H2 permeance of ca. 4.15x10-8 mol/m2-s-Pa (124 GPU). Additionally, the membrane achieves a CO2/N2 mixture separation factor of 37 at 25 °C and 1 bar with a CO2 permeance of ca. 3.96x10-8 mol/m2-s-Pa (118 GPU). Considering the vast array of compositionally distinct aZIFs that can be potentially deposited by this approach, an enormously large parameter space for membrane design is emerging to be explored.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Modification of ZIF‐8 Membranes for Gas Separation Using X‐ray Radiation

Abstract We report an X‐ray radiation‐induced modification of the structure and gas permeation behavior of ZIF‐8 membranes. With 300 min irradiation time, CO 2 permeance decreases by only 9 %, while N 2 and CH 4 permeances reduce by 75 and 65 %, respectively, leading to 3.7‐ and 2.6‐fold enhancements in ideal selectivity for CO 2 /N 2 and CO 2 /CH 4 .

Lee, Dennis T.↗

DOE OSTI2024

Modification of ZIF‐8 Membranes for Gas Separation Using X‐ray Radiation

Here, we report an X-ray radiation-induced modification of the structure and gas permeation behavior of ZIF-8 membranes. With 300 min irradiation time, CO 2 permeance decreases by only 9 %, while N 2 and CH 4 permeances reduce by 75 and 65 %, respectively, leading to 3.7- and 2.6-fold enhancements in ideal selectivity for CO 2 /N 2 and CO 2 /CH 4 .

ZIF-8 membranes↗

DOE OSTI2024

ZIF-8 Vibrational Spectra: Peak Assignments and Defect Signals

In this study, Zeolitic Imidazolate Framework-8 (ZIF-8) is a promising material for gas separation applications. It also serves as a prototype for numerous ZIFs, including amorphous ones, with a broader range of possible applications, including sensors, catalysis, and lithography. It consists of zinc coordinated with 2-methylimidazolate (2mIm) and has been synthesized with methods ranging from liquid-phase to solvent-free synthesis, which aim to control its crystal size and shape, film thickness and microstructure, and incorporation into nanocomposites. Depending on the synthesis method and post-synthesis treatments, ZIF-8 materials may deviate from the nominal defect-free ZIF-8 crystal structure due to defects like missing 2mIm, missing zinc, and physically adsorbed 2mIm trapped in the ZIF-8 pores, which may alter its performance and stability. Infra-red (IR) spectroscopy has been used to assess the presence of defects in ZIF-8 and related materials. However, conflicting interpretations by various authors persist in the literature. Here, we systematically investigate ZIF-8 vibrational spectra by combining experimental IR spectroscopy and first-principles molecular dynamics simulations, focusing on assigning peaks and elucidating the spectroscopic signals of putative defects present in ZIF-8 material. We attempt to resolve conflicting assignments from the literature and to provide a comprehensive understanding of the vibrational spectra of ZIF-8 and its defect-induced variations, aiming towards more precise quality control and design of ZIF-8-based materials for emerging applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Permeation Properties of Disordered Metal-Organic Framework Membranes Made by Vapor Phase Ligand Treatment

Zeolitic imidazolate frameworks (ZIFs) are nanoporous molecular sieves offering exciting opportunities for membrane- and adsorption-based gas separations. The Tsapatsis group developed an all-vapor-phase ligand induced permselectivation (LIPS) method for the fabrication of ZIF nanocomposite membranes. The LIPS method consists of a combination of atomic layer deposition of a dense oxide inside the mesopores of a porous support followed by transformation of the dense oxide deposit to nanoporous ZIF by exposure to sublimated vapors of an imidazolate ligand. It enables the formation of thin nanocomposite films consisting of ZIF deposited inside pores with diameters smaller than 10 nm. Vapor-phase conversion of the impermeable ZnO to ZIF increases flux of certain gases more than others. Vapor phase linker/ligand treatment (VPLT) can further modify the properties of LIPS and other membranes. The combination of LIPS with VPLT provides an all-vapor methodology for making and modifying ZIF membranes with the ability to control the ZIF deposit composition and the level of confinement in a variety of mesoporous supports. The propylene/propane separation performance of LIPS/VPLT ZIF membranes confined (entirely or partially) inside mesopores is remarkably superior to that of most conventional ZIF membranes consisting of unconfined (deposited on the external surface of porous supports) polycrystalline films. The accomplishments of this award are: (i) understanding of the LIPS process using mathematical models of atomic layer deposition (ALD), (ii) development of surface modification methods (vapor, e-beam, plasma, and X-ray treatments) to tune permeation properties, (iii) microstructural control of ZIF-8 films using ALD (support modification, direct ALD, and by use of in situ permeability monitoring), (iv) molecular simulations, and (v) thin film characterization and adsorption measurements using spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Zinc‐Imidazolate Films as an All‐Dry Resist Technology

Here, motivated by the drawbacks of solution phase processing, an all‐dry resist formation process is presented that utilizes amorphous zinc‐imidazolate (aZnMIm) films deposited by atomic/molecular layer deposition (ALD/MLD), patterned with electron beam lithography (EBL), and developed by novel low temperature (120 °C) gas phase etching using 1,1,1,5,5,5‐hexafluoroacetylacetone (hfacH) to achieve well‐resolved 22 nm lines with a pitch of 30 nm. The effects of electron beam irradiation on the chemical structure and hfacH etch resistance of aZnMIm films are investigated, and it is found that electron irradiation degrades the 2‐methylimidazolate ligands and transforms aZnMIm into a more dense material that is resistant to etching by hfacH and has a C:N:Zn ratio effectively identical to that of unmodified aZnMIm. These findings showcase the potential for aZnMIm films to function in a dry resist technology. Sensitivity, contrast, and critical dimensions of the patterns are determined to be 37 mC cm −2 , 0.87, and 29 nm, respectively, for aZnMIm deposited on silicon substrates and patterned at 30 keV. This work introduces a new direction for solvent‐free resist processing, offering the prospect of scalable, high‐resolution patterning techniques for advanced semiconductor fabrication processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Unit-cell-thick zeolitic imidazolate framework films for membrane application

Zeolitic imidazolate frameworks (ZIFs) are a subset of metal–organic frameworks with more than 200 characterized crystalline and amorphous networks made of divalent transition metal centres (for example, Zn 2+ and Co 2+ ) linked by imidazolate linkers. ZIF thin films have been intensively pursued, motivated by the desire to prepare membranes for selective gas and liquid separations. To achieve membranes with high throughput, as in ångström-scale biological channels with nanometre-scale path lengths, ZIF films with the minimum possible thickness—down to just one unit cell—are highly desired. However, the state-of-the-art methods yield membranes where ZIF films have thickness exceeding 50 nm. Here we report a crystallization method from ultradilute precursor mixtures, which exploits registry with the underlying crystalline substrate, yielding (within minutes) crystalline ZIF films with thickness down to that of a single structural building unit (2 nm). The film crystallized on graphene has a rigid aperture made of a six-membered zinc imidazolate coordination ring, enabling high-permselective H 2 separation performance. The method reported here will probably accelerate the development of two-dimensional metal–organic framework films for efficient membrane separation.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Enantioselective catalysts based on metal-organic framework-supported nucleotides

Adenosine triphosphate (ATP) and other nucleotides can be irreversibly bound to the metal-organic framework (MOF) MIL-101(Cr). Analysis of X-ray diffraction data suggests that the location of the adsorbed ATP molecule is in proximity of the Cr 3 clusters. Solid-state NMR and DFT calculations indicate that ATP is bound to MIL-101(Cr) through linkages of the terminal phosphate group with Cr(III) of the framework. In the presence of Cu(II) ions, the MOF-supported nucleotides can function as stable and reusable enantioselective heterogeneous catalysts for reactions like Diels-Alder and Michael addition. In conclusion, compared to the corresponding homogeneous nucleotide-based artificial metalloenzymes (ArMs), the MOF-supported nucleotide-based ArMs exhibit significantly enhanced activity and selectivity in certain cases, demonstrating their potential as a new class of enantioselective heterogeneous catalysts.

36 MATERIALS SCIENCE↗

DOE OSTI2023

CFD Simulation of the Dosing Behavior within the Atomic Layer Deposition Feeding System

The effective operation of atomic layer deposition (ALD) feeding system is the premise of realizing specific ALD processes. In the present work, a detailed computational fluid dynamics (CFD) model of the feeding system has been developed and validated, which accounts for the roles of ALD valves and manifolds. A numerical simulation of the compressible fluid flow and heat/mass transfer within the feeding system was conducted. The dosing amounts and the spatiotemporal distributions of the precursors can be accurately predicted using the CFD model, as validated by experimental results. Different precursors, operating conditions, and structures of the feeding system were simulated and analyzed to examine the operating flexibility of the feeding system. The simulation results can be adopted as the upstream boundary conditions for simulations of the ALD process in the reaction chamber. The substrate-scale simulation indicates that the effect of the feeding system on the film deposition is highly related to the surface kinetics of ALD. The present work can serve as a guide for the development and optimization of different ALD-based processes via proper operation and even the design of the feeding system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Twin suppression effect of dihydroxy-benzene isomers during the secondary growth of b -oriented zeolite MFI nanosheet films

In this study, the presence of MFI twin crystals on b-axis oriented zeolite MFI nanosheet films was suppressed by adding dihydroxy-benzene isomers in the synthesis mixture. The resulting nanosheet films exhibit good intergrowth and a small grain thickness of 30–45 nm within a relatively short synthesis time (hours). The possible twin suppression mechanisms for the three isomers are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Phosphorus-containing solid catalysts and reactions catalyzed thereby, including synthesis of p-xylene

Methods and phosphorus-containing solid catalysts for catalyzing dehydration of cyclic ethers (e.g., furans, such as 2,5-dimethylfuran) and alcohols (e.g., ethanol and isopropanol). The alcohols and cyclic ethers may be derived from biomass. One example includes a tandem Diels-Alder cycloaddition and dehydration of biomass-derived 2,5-dimethyl-furan and ethylene to renewable p-xylene. The phosphorus-containing solid catalysts are also active and selective for dehydration of alcohols to alkenes.

Cho, Hong Je↗

DOE OSTI2022

Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption

Abstract With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g −1 . Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

Luo, Tian‐Yi↗

DOE OSTI2022

Dehydrogenation of Propane and n -Butane Catalyzed by Isolated PtZn 4 Sites Supported on Self-Pillared Zeolite Pentasil Nanosheets

Propene and 1,3-butadiene are important building-block chemicals that can be produced by dehydrogenation of propane and butane over Pt catalysts. The challenge is to develop highly active and selective catalysts that are resistant to deactivation by Pt sintering and coke formation. We have recently shown that these objectives can be met for propane dehydrogenation using atomically dispersed Pt atoms anchored to neighboring ≡SiOZn-OH groups bonded to the framework dealuminated zeolite BEA. In the present study, we demonstrate that significantly superior performance can be achieved by using self-pillared pentasil (SPP) zeolite nanosheets. Following catalyst reduction in H 2 , atomic-resolution, scanning transmission electron microscopy (STEM) and X-ray absorption spectroscopy (XAS) indicate that Pt is stabilized in structures well approximated as (≡Si-O-Zn) 4-5 Pt. These species are highly active, selective, and stable for propane dehydrogenation (PDH) to give propene and for n-butane dehydrogenation (BDH) to give 1,3-butadiene. No catalyst deactivation was observed after 12 days of time on stream, and the selectivity remained at nearly 100% for PDH conducted at 823 K and a weight hourly space velocity (WHSV) of 1,350 h -1 . The apparent rate coefficient for PDH over this catalyst is significantly higher than that reported previously for Pt-containing catalysts. For BDH at 823 K and a WHSV of 3560 h -1 , the selectivity to butene isomers and 1,3-butadiene is 98.9%, and the selectivity to 1,3-butadiene is 45%. Here, we propose that the high catalyst stability observed during PDH and BDH is a consequence of a large fraction of the Pt-containing centers being located on the external surface of the zeolite nanosheets, where nascent coke precursors can desorb before condensing to form coke.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Modeling of deposit formation in mesoporous substrates via atomic layer deposition: Insights from pore‐scale simulation

Atomic layer deposition (ALD) has been a promising technique in fabricating membranes and tuning their properties with a precision at the atomic level. Fabrication of zeolitic imidazolate framework (ZIF) membranes using the ligand-induced permselectivation (LIPS) method starts with the formation of an oxide in a mesoporous substrate by ALD and is followed by the transformation of this oxide to ZIF using imidazolate vapor treatment. The objective of the ALD step is to block the mesopores with a thin deposit, that is, one with small penetration depth and small thickness on the top surface of the substrate. Unlike typical ALD on nonporous substrates, where all available sites react per ALD cycle, thin deposit formation in a mesoporous substrate requires that only a small fraction of the available deposition sites (i.e., close to the substrate surface) is subjected to ALD. Consequently, reactant dosing and duration of pulses are important process variables which, together with diffusion and reaction kinetics determine the deposit structure. Quantitative understanding of the interplay of these variables and phenomena can enable the rational design of ALD within mesoporous substrates. Here, we extend our earlier modeling effort considering the coexistence of ALD both inside the pores and on the external surface of the substrate. Finite-volume based models were developed and validated to simulate the two distinct modes of deposition cycle by cycle. The total mass uptake of the substrate with ALD cycles can be predicted using the combined surface deposition and pore reaction–diffusion models as affirmed by in situ quartz crystal microbalance experimental data. The ALD reactor model combined with the deposition model can accurately capture the number of ALD cycles needed to block the pores of the substrate. Based on the model, we designed a modified ALD process and examined the performance of the corresponding LIPS membranes. Furthermore, the present modeling work provides a new understanding of the deposit formation via ALD within mesoporous substrates for a variety of membrane applications.

atomic layer deposition↗

DOE OSTI2022

Simultaneously Enhanced Hydrophilicity and Stability of a Metal-Organic Framework via Post-Synthetic Modification for Water Vapor Sorption/Desorption

With increasing demands for high-performance water sorption materials, metal-organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post-synthetic modification (PSM) of MOF-808, with di-sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g -1 . Further, di-sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF-808 to below 25 % RH. While MOF-808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di-sulfonic acid PSM MOF-808 retained >80 % of the original capacity. PSM MOF-808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Zeolitic Imidazolate Framework Membranes: Novel Synthesis Methods and Progress Toward Industrial Use

In the last decade, zeolitic imidazolate frameworks (ZIFs) have been studied extensively for their potential as selective separation membranes. In this review, we highlight unique structural properties of ZIFs that allow them to achieve certain important separations, like that of propylene from propane, and summarize the state of the art in ZIF thin-film deposition on porous substrates and their modification by postsynthesis treatments. We also review the reported membrane performance for representative membrane synthesis approaches and attempt to rank the synthesis methods with respect to potential for scalability. To compare the dependence of membrane performance on membrane synthesis methods and operating conditions, we map out fluxes and separation factors of selected ZIF-8 membranes for propylene/propane separation. Finally, we provide future directions considering the importance of further improvements in scalability, cost effectiveness, and stable performance under industrially relevant conditions.

Chemistry↗

DOE OSTI2022

Molecular Simulations Probing the Adsorption and Diffusion of Ammonia, Nitrogen, Hydrogen, and Their Mixtures in Bulk MFI Zeolite and MFI Nanosheets at High Temperature and Pressure

Recent advances in the synthesis of MFI zeolite nanosheets have led to highly selective membranes that are promising candidates for small-scale ammonia separation from ammonia/nitrogen/hydrogen mixtures in distributed green ammonia production plants. Using force-field-based molecular simulations, we evaluate the performance of bulk all-silica MFI zeolite and a 3 nm thick all-silica MFI nanosheet for ammonia/nitrogen/hydrogen separations at moderate temperature and pressure conditions (T = 373 K, p = 5 bar) as well as conditions relevant for a membrane-based reactor–separator process (T = 523 or 623 K, p = 80 bar). Isobaric–isothermal Gibbs ensemble Monte Carlo (GEMC) simulations were carried out to understand the selective adsorption behavior for these mixtures. Molecular dynamics simulations in the canonical ensemble were performed to examine the transport behavior of ammonia in a mixture with nitrogen or hydrogen at loadings obtained from the GEMC simulations. Our results show that both bulk MFI and the nanosheet with explicit surface silanols are highly selective toward ammonia adsorption, but the adsorption selectivity decreases by factors of 4 and 10 for ammonia/nitrogen and ammonia/hydrogen mixtures as the temperature is increased from 373 to 623 K. Conversely, the diffusion selectivities toward ammonia are more favorable at process-relevant temperatures and for the MFI nanosheet. Here, at T = 523 K and p = 80 bar, our simulations predict overall separation factors of 3.8 ± 0.2 and 4.5 ± 0.3 for ammonia/nitrogen and ammonia/hydrogen mixtures, respectively, in the bulk MFI zeolite, and separation factors of 8.6 ± 0.4 and 12.5 ± 0.8, respectively, for the MFI nanosheet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Nanocomposite membranes and methods of forming the same

A nanocomposite including a mesoporous, macroporous, or a combination thereof oxide and a zeolitic imidazolate framework (ZIF) that is filling the pores of the oxide to form a ZIF phase embedded and at least substantially confined mostly within the oxide. Methods of making nanocomposites including the steps of depositing an oxide in the pores of a mesoporous oxide; and further treating the resulting material with vapor, liquid, or supercritical CO2 comprising an azole-based compound, a carboxylate based compound, or a combination thereof. Use of disclosed articles to separate propylene and propane in a mixture thereof.

Tsapatsis, Michael↗