Search NASA⌕ Search

Engineering topics

Tucker, Julie

Publications and source records attributed to Tucker, Julie.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Combined modeling and experiments to predict corrosion and embrittlement in dual-phase stainless steels within the MARMOT framework

Extending service of Light Water Reactors (LWRs) to beyond 60 years will demand high integrity of materials and components in the reactors. The accurate evaluation and prediction of materials performance under anticipated operating conditions are of particular importance for ensuring the safety of nuclear power plants over their extended lifetime. Stainless steels are extensively used as structural alloys in light water reactor (LWR) systems because of their excellent combination of mechanical properties and corrosion resistance. Austenitic stainless steel welds and cast austenitic stainless steels (CASS) contain significant amounts of ferrite ~5-30% and are ubiquitous in LWR piping (elbows, pump casings, valves) and internal structural components. During their lifetime, these components are subjected to thermal aging at the temperature range of 288-327°C for pressurized water reactors (PWR). A phase transformation within the ferrite phase of these materials leads to embrittlement and degradation in corrosion resistance, which undermines the materials selection criteria.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Density Functional Theory Study of the Initial Stages of Cl-Induced Degradation of α -Cr 2 O 3 Passive Film

The ion exchange and point defect models are two prominent models describing the role of anions, such as chlorides, in the degradation of passive oxide films. Here the thermodynamic feasibility of critical steps of Cl-induced degradation of a hydroxylated α-Cr 2 O 3 (0001) surface, as proposed by these two models, are studied. Both models begin with Cl substitution of surface OH and H 2 O, which becomes less favorable with increasing Cl coverage. The initial stages of Cl-induced breakdown of the α-Cr 2 O 3 depend on Cl coverage and the presence of O vacancy near the surface as follows: (1) neither Cl insertion (supporting the ion exchange model) nor Cr vacancy formation (supporting the point defect model) is feasible at low Cl coverages except in the presence of O vacancies near the surface, where Cl insertion is thermodynamically feasible even at low coverages, (2) in the absence of O vacancies, Cr vacancy formation becomes feasible from 10/12 ML onwards whereas Cl insertion by exchange with subsurface OH only becomes feasible at full coverage. This implies that at higher coverages Cl-induced degradation first initiates through a vacancy formation mechanism, but both insertion and vacancy formation would be feasible at full coverage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ab initio Study of the Mechanism for the Initiation of Localized Corrosion on Stainless Steel

Stainless steels are widely used as primary piping material in PWR’s because of their high corrosion resistance largely due to the formation of a passive film of metal oxides, such as chromium (e.g., Cr2O3). However, upon exposure to aggressive ions like chlorides (Cl-), stainless steel becomes susceptible to localized corrosion due to the breakdown of the passive film. It is therefore essential to gain fundamental insights into the mechanism of the passive film breakdown (depassivation) to develop a tailored design to minimize localized corrosion. This project investigates the initial stages of the depassivation of the Cr passive film using density functional theory (DFT), a quantum based computational method.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Advancement of Supercritical Carbon Dioxide Technology through Round Robin Testing and Fundamental Modeling

Growing interest in supercritical carbon dioxide (sCO 2 ) cycles for advanced reactors is driving the need for corrosion data on candidate plant materials. The sCO 2 Brayton cycle is being considered for power conversion systems for a number of nuclear reactor concepts including the sodium fast reactor, fluoride salt-cooled high temperature reactor, high temperature gas reactor, and several types of small modular reactors. Multiple organizations have developed test facilities to address the corrosion data knowledge gap in high temperature, high pressure sCO 2 environments but, to date, there has been no formal test program among these organizations to validate the consistency of the data they produce. A demonstration of comparable and reproducible results enables a coordinated effort to explore the sCO 2 parameter space relevant to advanced reactor technology. This proposal establishes a round robin test plan for sCO 2 corrosion testing and the organization of a sCO 2 Materials Group to guide future materials testing directions. Furthermore, this proposal outlines efforts to elucidate the mechanisms of sCO 2 corrosion by performing identical tests in supercritical steam, testing model alloys with various composition and environmental conditions, accompanied by modeling efforts to study rate controlling mechanisms of corrosion and to help understanding the effects of impurities.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Developing a Macro-scale SiC-cladding Behavior Model Based on Localized Mechanical and Thermal Property Evaluation on Pre- and Post-Irradiation SiC-SiC Composites (Final Report)

Silicon carbide is being investigated for accident tolerant fuel cladding applications due to its good neutronic performance, high temperature strength, exceptional stability under irradiation, and reduced oxidation compared to Zircaloy under accident conditions. The development and investigation of these materials is particularly important in the light of the Fukushima event and subsequent emphasis in DOE on accident tolerant fuel (ATF) concepts. In this work, we propose to develop and improve upon existing small-scale mechanical and thermal characterization methods, including micro-cantilever bend tests and fiber push-out tests, and time-domain thermo-reflectance measurements. These techniques will be applied to evaluate micro-scale properties of SiC-SiC composite constituents (matrix, fibers, interphase). The results will be coupled with meso-scale fiber and void structural information and be used as input to develop a comprehensive, finite element-based model based on constituent properties. The goal of this multi-scale model is to be used to predict anisotropic mechanical and thermal cladding behaviors. The model will be benchmarked against measurements of bulk properties and validated for radiation-damaged materials by utilizing irradiated SiC-SiC composites available from General Atomics. The characterization approach developed under this program will have particular application in the property prediction of reactor irradiated materials, as only small volumes need to be tested, minimizing associated hazards and costs. The micro-scale test methods developed here will be used along with meso-scale structural data to inform a finite element model of the full SiC-based cladding system. This model will capture fabrication and irradiation effects and importantly include for the first-time separate material data for each system component. The incorporation of these micro-scale effects will lead to a more accurate model of SiC-SiC composite behavior, enabling further advancements in the development and design of SiC-based materials for improved fuel cladding performance. The aim of this work is to develop advanced localized material characterization techniques to directly measure mechanical and thermal properties of the individual constituents of SiC-based claddings at the relevant micro-scale. SiC-SiC composites will be evaluated before and after irradiation and these results will be coupled with macro-scale properties and microstructural information in order to provide the input parameters for a comprehensive finite element model, which will be developed in this program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Modeling and Validation of Irradiation Damage in Ni-based Alloys for Long-Term LWR Applications (Final Report)

As light water reactor (LWR) plant lives are extended, the need for predictive modeling tools for materials degradation increase in order to ensure safe operation and plan for component replacements. The Grizzly code, which is built on the MOOSE multi-physics simulation environment, is being developed for exactly this purpose. To extend Grizzly to include capabilities for modeling Ni-based alloys, we propose a US/UK integrated program to address thermal and irradiation-induced transformations mechanisms of Alloys 690 and 625. Alloy 690 is widely used in existing LWR plants due to its superior stress corrosion cracking (SCC) resistance compared to Alloy 600. Alloy 625 is used in more limited applications but offers the benefits of both high strength (in the aged condition) and corrosion/SCC resistance. Research has shown that both alloys can undergo phase changes due to thermal or irradiation exposure. In the precipitation-hardened condition, Alloy 625 “softens” during neutron irradiation as the strengthening precipitates decompose and metastable precipitates form. However, the nature and rates of these transformations as a function of exposure conditions are not well understood. Similarly, the effects of these thermal and irradiation-induced microstructural changes on mechanical properties require evaluation. The proposed program combines thermal and irradiation experiments, mechanical testing, microstructural characterization using state-of-the art analytical techniques, atomistic modeling, micro-and macro-scale modeling via Grizzly. This multi-pronged approach yields several benefits: 1) atomistic scale models capture the physics of the mechanisms of phase transformations, which can be generalized to other systems, 2) the modeling results (from atomistic to continuum) will be validated experimentally to ensure the predictive aspect, 3) the microstructure/property relationships captured with mechanical testing provides information at the engineering scale that is needed to validate the integration of the proposed new capability into Grizzly

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Influence of Alloying on α-α' Phase Separation in Duplex Stainless Steels

Thermal embrittlement caused by phase transformations in the temperature range of 204–538 °C limits the service temperature of duplex stainless steels. The present study investigates a set of wrought (2003, 2101, and 2205) and weld (2209-w and 2101-w) alloys in order to better understand how alloying elements affect thermal embrittlement. Samples were aged at 427 °C for up to 10,000 h. The embrittlement and thermal instability were assessed via nanoindentation, impact toughness testing, and atom probe tomography (APT). Results demonstrate that the spinodal amplitude is not an accurate predictor of mechanical degradation, and that nanoindentation within the ferrite grains served as a reasonable approximate for the embrittlement behavior. Compositionally, alloys with a lower concentration of Cr, Mo, and Ni were found to exhibit superior mechanical properties following aging.

Garfinkel, David A.↗
DOE OSTI2017

Corrosion Behavior of Steels in Supercritical CO 2 for Power Cycle Applications

In order to understand issues with corrosion of heat exchanger materials in direct supercritical carbon dioxide (sCO 2 ) power cycles, a series of autoclave exposure experiments and electrochemical experiments have been conducted. Corrosion behaviors of 347H stainless steel and P91 martensitic-ferrtic steel in sCO 2 environment have been compared. In autoclave exposure tests performed at 50°C- 245°C and 80 bar. Mass change measurements, surface characterization, and corrosion product analysis have been conducted to understand the corrosion behavior of steels in sCO 2 containing H 2 O and O 2 . Electrochemical tests performed at room temperature and 50°C, a simulation environment of water condensation phase with dissolved CO 2 was prepared to evaluate the corrosion resistance of materials. From both types of experiments, generally 347H showed higher corrosion resistance than P91.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2016

Microstructural Characterization of Irradiated Fuels and Materials for the United States High Performance Research Reactor Fuel Development Program and the Fuel Cycle Research and Development Program

In an effort to contribute to the development of advanced nuclear fuel for research reactors, monolithic and dispersion plate fuels will be examined to determine how irradiation parameters such as fission density, fission rate, and irradiation temperature, as well as mechanical parameters such as composition and fabrication, affect the final microstructure of the fuel, post irradiation. Electron Backscatter Detection (EBSD) analysis capabilities of irradiated materials will be developed as well as improvements on irradiated sample preparation in order to provide higher quality samples for SEM, FIB, and TEM. In addition, image analysis techniques developed at Idaho National Laboratory (INL) will be employed to examine microstructural features such as fission product precipitates and fission gas bubbles. The main goals are to further develop EBSD capabilities on irradiated material; characterize microstructure of irradiated fuel to support qualification; develop a consistent, effective process for image analysis using INL developed software; and provide repeatable, statistically-confident, critically assessed data to further modeling efforts. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗