Search NASA⌕ Search

Engineering topics

Tudisco, O

Publications and source records attributed to Tudisco, O.

First results from plasma density measurements in the FTU tokamak by means of a two-frequency pulsed time-of-flight refractometer

A pulsed time-of-flight refractometer was developed and tested to determine the mean plasma density in the T-11M tokamak by measuring the propagation time of nanosecond microwave pulses in plasma. Later, it was also proposed to use such an instrument to measure and control the mean plasma density in the ITER tokamak by probing the plasma with an extraordinary wave, the electric field of which is perpendicular to the magnetic field in plasma, in the transparency window at frequencies of 50-100 GHz. To avoid the effect of the density profile shape on the measurement results in the nonlinear mode of refractometer operation (near the cutoff), a system operating at two different probing frequencies was developed and tested. Such a system provides two values of the time delay, which can be used to estimate the peaking factor of the density distribution {alpha} and correctly determine the linear density Left-Pointing-Angle-Bracket Nl Right-Pointing-Angle-Bracket , regardless of the density profile (assuming a smooth density profile of the form of N({rho}) = N(0)(1 - {rho}{sup 2}){sup {alpha}}, where N(0) is the central plasma density and {rho} = r/a is the normalized plasma radius). The first experiments on density measurements in the FTU tokamak performed with this refractometer are described, and results from these experiments are presented. The formation of a thin dense plasma layer in the zone of a strong magnetic field (the so-called MARFE layer) at a relatively low (for FTU) plasma density of {approx}6 Multiplication-Sign 10{sup 19} m{sup -3} was detected. The thickness of this layer, determined from the refractometry data, agrees well with the data obtained using a digital camera.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower hybrid current drive at ITER-relevant high plasma densities

Recent experiments indicated that a further non-inductive current, besides bootstrap, should be necessary for developing advanced scenario for ITER. The lower hybrid current drive (LHCD) should provide such tool, but its effectiveness was still not proved in operations with ITER-relevant density of the plasma column periphery. Progress of the LH deposition modelling is presented, performed considering the wave physics of the edge, and different ITER-relevant edge parameters. Operations with relatively high edge electron temperatures are expected to reduce the LH{sub ||} spectral broadening and, consequently, enabling the LH power to propagate also in high density plasmas ({sub ||} is the wavenumber component aligned to the confinement magnetic field). New results of FTU experiments are presented, performed by following the aforementioned modeling: they indicate that, for the first time, the LHCD conditions are established by operating at ITER-relevant high edge densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ECRH: A Tool To Control Disruptions In Tokamaks

ECRH is suited for MHD control in tokamaks and this is well known since the several pioneering experiments investigating MHD stabilization either for confinement increase or for avoidance of disruptions originated by such instabilities. The first of these objectives has been strongly pursued up to the design of a system for neoclassical tearing mode stabilization in ITER based on the use of ECRH/ECCD, whereas the second one has been mostly neglected, despite the initial good results obtained on small tokamaks (RTP, T-10 and JFT-2M) in which ECRH was used to avoid disruptions originated by MHD limits or strong gas puffing. In the last years ECRH has been used again for disruption control on the Frascati Tokamak Upgrade (FTU) and on ASDEX Upgrade (AUG). Disruptions have been obtained by density limit and by impurity injection and an accurate power deposition scan has been performed. Full avoidance has been demonstrated on both tokamaks, confirming the need of a precise power localization and of the existence of a power threshold. The results of past experiments will be reviewed on the basis of the results recently obtained in FTU and AUG, together with a preliminary analysis of the applicability of this disruption control technique to ITER, by extrapolation of the power thresholds found in AUG and FTU.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Models comparison for JET polarimeter data

A complete comparison between the theory and the measurements in polarimetry was done by using the Far Infrared Polarimeter at JET. More than 300 shots were analyzed, including a wide spectrum of JET scenarios in all critical conditions for polarimetry: high density, high and very low fields, high temperatures.This work is aimed at the demonstration of the robustness of the theoretical models for the JET polarimeter measurements in the perspective of using these models for ITER like plasma scenarios . In this context, an assessment was performed on how the line-integrated plasma density along the central vertical chord of FIR polarimeter could be evaluated using the Cotton-Mouton effect and its possible concrete use to correct fringe jumps of the interferometer.The models considered are: i) the rigorous numerical solution of the Stokes propagation equations, using dielectric tensor evaluated from JET equilibrium and Thomson scattering [1,2]; ii) two types of approximated solutions [2,3] and iii) the Guenther empirical model [4] that considers the mutual effect between Cotton-Mouton and Faraday rotation angle. The model calculations have been compared with polarimeter measurements for the Cotton-Mouton phase shift.The agreement with theory is satisfactory within the limits of experimental errors [3].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the plasma density in the FTU tokamak by a pulsed time-of-flight X-wave refractometer

On-line control over the plasma density in tokamaks (especially, in long-term discharges) requires reliable measurements of the averaged plasma density. For this purpose, a new method of density measurements-a pulsed time-of-flight plasma refractometry-was developed and tested in the T-11M tokamak. This method allows one to determine the averaged density from the measured time delay of nanosecond microwave pulses propagating through the plasma. For an O-wave, the measured time delay is proportional to the line-averaged density and is independent of the density profile (f>>f{sub p}) {tau}{sub o} {approx} k{sub o} 1/f{sup 2} {integral}{sub l} N(x)dx. Here, f is the frequency of the probing wave, f{sub p} is the plasma frequency, l= 4 a is the path length for two-pass probing in the equatorial plane, a is the plasma minor radius, k{sub O} and k{sub X} are numerical factors, f{sub c} is the electron-cyclotron frequency at the axis of the plasma column, and f{sub p}>>f{sub c}, f. Measurements of the time delay provide the same information as plasma interferometry, though they do no employ the effect of interference. When the conditions f{sub p}>>f{sub c}, f are not satisfied, the measured time delay depends on the shape of the density profile. In this case, in order to determine the average density regardless of the density profile, it is necessary to perform simultaneous measurements at several probing frequencies in order to determine the average density. In ITER (Bt {approx} 5T), a spectral window between the lower and upper cutoff frequencies in the range of 50-100 GHz can be used for pulsed time-of-flight X-wave refractometry. This appreciably simplifies the diagnostics and eliminates the problem of the first mirror. In this paper, the first results obtained in the FTU tokamak with a prototype of the ITER pulsed time-of-flight refractometer are presented. The geometry and layout of experiments similar to the planned ITER experiments are described. The density measured by pulsed time-of-flight refractometry is shown to agree well with the results obtained in FTU with a two-frequency scanning IR interferometer. The results obtained are analyzed, and the future experiments are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗