Engineering topics

Turco, F. (ORCID:0000000237230438)

Publications and source records attributed to Turco, F. (ORCID:0000000237230438).

7 records

DOE OSTI2024

Radiation induced non-linear oscillations in ITER baseline scenario plasmas in DIII-D

Abstract This work shows how the radiation brought about by metals or metal-equivalent radiators such as Kr and Xe produces non-linear dynamics on otherwise stationary β N flattops of DIII-D ITER Baseline Scenario demonstration discharges. The Kr and Xe gases are used to reproduce the radiative loss rates of W in present machines that operate at core temperatures much lower than the expected ITER temperature. Experiments on DIII-D with injection of Kr and Xe, as well as with sources of intrinsic metals reach the range of radiated fraction values expected in the ITER core and experience slow oscillations in temperature and radiated power. In many cases of high radiated fraction, the core temperature decreases enough for the safety factor profile to rise above the 1/1 rational surface, naturally eliminating sawteeth and occasionally producing a persistent helical core. The oscillations can be reproduced by a modified Lotka–Volterra system for temperature and radiated fraction if diffusion and noise are included, which indicates that the interplay between temperature and radiation can be the main cause of the cyclic nature of the system. A new physics based model which includes equations for temperature, density and input power can also reproduce the oscillations observed in the experiments. The present results suggest that the non-linearity of the system can be increased by the inclusion of the inherently non-linear alpha heating term, which is proportional to ∼ n e 2 T i 2 , and obtains oscillations in the model when added to an otherwise more stationary system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

First tungsten radiation studies in DIII-D’s ITER baseline demonstration discharges

Abstract ITER Baseline Scenario plasmas were studied in DIII-D using krypton and xenon gases as a proxy for the tungsten that will be present in ITER. These impurities were chosen for having the same radiative loss rate Lz as tungsten would exhibit in the hotter ITER core. Results show that the scenario with these core radiators spans the range of impurity concentration and W radiated fraction expected for ITER, and up to 50% higher values, explored at zero injected torque, as well as 1 Nm and full co-torque injection with T ∼ 3 Nm. Stationary discharges with duration >2–4 τ R are achieved with f rad ⩾ 30% leading to a reduction in confinement of ∼10%, and a comparison with real metal radiators in the same range of f rad shows that the higher Lz at the lower temperatures in these plasmas yields too pessimistic results on the survivability and performance of this scenario in ITER. Simulations of ITER power balance including W radiation show that with concentration up to three times higher than in the DIII-D plasmas the scenario can be stationary, remaining at acceptable core radiated fraction values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Modelling and experiment to stabilize disruptive tearing modes in the ITER baseline scenario in DIII-D

Abstract The achievement of high gain, stationary conditions in a tokamak scenario aimed at producing fusion energy in the ITER Project is crucial to the demonstration that this form of energy can be used in future reactors to provide cheap and clean energy globally. Disruptions are a challenge for the fusion energy field, in particular for the ‘ITER Baseline Scenario’ (IBS), as reproduced in the DIII-D tokamak. This work shows that a solution has been found for the m = 2/ n = 1 tearing modes that have consistently caused disruptions in the IBS: stable operation down to zero input torque was achieved by modifying the current density profile at the beginning of the pressure flattop and the ELM character later in the discharges, guided by previous results showing that the most likely cause of these instabilities is the current density profile. The coupling between sawteeth, n>2 modes and the 2/1 TMs is shown to not be statistically significant, nor the leading origin for the evolution towards instability. Ideal and resistive MHD modeling provide positive verification that a steeper ‘well’ in the region of the q = 2 rational surface leads to worse ideal stability, higher tearing index Δ’ and lower threshold Δ’ c for resistive instabilities, consistent with the experimental results. This provides confidence that the methods used in this work can be extrapolated to other devices and applied to avoid disruptions in ITER and pulsed fusion devices worldwide.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Power and isotope effects in the ITER baseline scenario with tungsten and tungsten-equivalent radiators in DIII-D

Abstract Experiments in DIII-D document the ITER Baseline Scenario (IBS) at q 95 ∼ 3 and P IN / P LH ∼ 1–2, in both deuterium and hydrogen utilizing Kr and Xe as Tungsten-equivalent radiators. The power threshold for H-mode operation ( P LH ) was determined experimentally without added impurities and found to be about a factor of two higher than the scaling law. In recent IBS experiments in deuterium, intrinsic levels of metals such as Tungsten (W) or molybdenum and inconel are present that reduce the pedestal pressure by 20%–25%. A complete radiative collapse of deuterium IBS plasmas occurs at W core concentrations C W = 10 −5 . Simulations show that for core temperatures expected for ITER, the plasmas would not have a radiative collapse at C W = 1 × 10 −5 , moreover Q = 8–10 would still be achieved for C W up to 3 × 10 −5 . In contrast to deuterium, the IBS in hydrogen is not affected by intrinsic high-Z impurities, indicating that hydrogen H-modes in ITER may not inform the D-T phase with respect to W accumulation and discharge survival. Compared to deuterium, the pedestal pressure in hydrogen is ∼25% lower, with much higher ELM frequency of 150 Hz, decreasing with input power. Krypton was injected in a matrix scan of input power and impurity flow in IBS hydrogen discharges. Krypton impurity density profiles in hydrogen are similar to deuterium plasmas, but at Kr flows that are 2–3 times higher for the same input power. Krypton is transported into the core and affects the whole radius; at the highest injection rates a radiative collapse occurs at core radiation fractions of 0.3–0.35, consistent with the expected maximum W radiation fraction for ITER core plasmas. Comparing the results with previous International Tokamak Physics Activity database studies of the IBS confirms that at higher radiation fraction due to high-Z impurities, a drop in H 98 of >10% is observed. On the other hand, the results using Kr as a W-equivalent radiator indicate that metal (W) devices at lower core temperatures than ITER may provide overly pessimistic performance extrapolations to ITER for deuterium-tritium operation. The new DIII-D results support a more attractive option for the ITER Research Plan with a short hydrogen phase for system commissioning, transitioning to deuterium operations as soon as possible to provide relevant conditions for deuterium-tritium operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

MHD stability of negative triangularity DIII-D plasmas

Abstract Negative triangularity (NT) experiments in DIII-D point to an emergent reactor scenario free of sawteeth, endowed with benign, nondisruptive n = 2 tearing modes, which experience q min ⩾ 1 similar to the positive triangularity hybrid scenario. Plasmas exhibiting this behavior attain β N > 3 , high enough to reconsider long held views of NT stability. Ideal MHD and tearing stability analysis of well-diagnosed equilibrium reconstructions of experimental hybrid-like plasmas predict that among shape parameters, MHD stability limits are only sensitive to average triangularity. Operation is predicted to be possible at β N relevant to upcoming tokamaks and commercial NT reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Simultaneous stabilization and control of the n = 1 and n = 2 resistive wall mode

Abstract DIII-D experiments demonstrate simultaneous stability measurements and control of resistive wall modes (RWMs) with toroidal mode numbers n = 1 and n = 2. RWMs with n > 1 are sometimes observed on DIII-D following the successful feedback stabilization of the n = 1 mode, motivating the development of multi- n control. A new model-based multi-mode feedback algorithm based on the VALEN physics code has been implemented on the DIII-D tokamak using a real-time GPU installed directly into the DIII-D plasma control system. In addition to stabilizing RWMs, the feedback seeks to control the stable plasma error field response, enabling compensation of the typically unaddressed DIII-D n = 2 error field component. Experiments recently demonstrated this algorithm’s ability to simultaneously control n = 1 and n = 2 perturbed fields for the first time in a tokamak, using reactor relevant external coils. Control was maintained for hundreds of wall-times above the n = 1 no-wall pressure limit and approaching the n = 1 and n = 2 ideal-wall limits. Furthermore, a rotating non-zero target was set for the feedback, allowing stability to be assessed by monitoring the rotating plasma response (PR) while maintaining control. This novel technique can be viewed as a closed-loop extension of active MHD spectroscopy, which has been used to validate stability models through comparisons of the PR to applied, open-loop perturbations. The closed-loop response measurements are consistent with open-loop MHD spectroscopy data over a wide range of β N approaching the n = 1 ideal-wall limit. These PR measurements were then fit to produce both VALEN and single-mode stability models. These models allowed for important plasma stability information to be determined and have been shown to agree with experimentally observed RWM growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

The physics basis to integrate an MHD stable, high-power hybrid scenario to a cool divertor for steady-state reactor operation

Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q 95 and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H 98y2 = 1.7, f GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗