Engineering topics

Turco, Francesca

Publications and source records attributed to Turco, Francesca.

7 records

DOE OSTI2021

Diverted Negative Triangularity plasmas on DIII–D: The benefit of high confinement without the liability of an edge pedestal

Diverted discharges at negative triangularity on the DIII-D tokamak sustain normalized confinement and pressure levels typical of standard H-mode scenarios (H 98y,2 ≅1, β N ≅3) without developing an edge pressure pedestal, despite the auxiliary power far exceeding the L → H power threshold expected from conventional scaling laws. The power degradation of confinement is substantially weaker than the ITER-89P scaling, resulting in a confinement factor that improves with increasing auxiliary power. Furthermore, the absence of the edge pedestal is beneficial in several aspects, such as eliminating the need for active mitigation or suppression of edge localized modes, low impurity retention and a reconstructed scrape-off layer heat flux width at the mid-plane that exceeds the ITPA multi-machine scaling law by up to 50%. Together with technological advantages granted by placing the divertor at larger radii, plasmas at Negative Triangularity without an edge pedestal feature both core confinement and power handling characteristics that are potentially suitable for operation in future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Cause and impact of low-frequency chirping modes in DIII-D hybrid discharges

Significant variations in MHD activity and fast-ion transport are observed in the DIIID high-beta, steady-state hybrid discharges with a mixture of Electron Cyclotron (EC) waves and Neutral Beam Injection (NBI). When Electron Cyclotron Heating (ECH) or Current Drive (ECCD) is applied, Alfven Eigenmodes (AEs) are usually suppressed and replaced by low-frequency bursting modes. The analysis of a recently compiled database of hybrid discharges suggests that the change of the fast-ion pressure especially the perpendicular pressure is the main factor responsible for the instability transition. The lower ratio of fast-ion injection speed v inj to Alfven speed v alfven and slight drop of safety factor q min during ECCD may also facilitate the transition. The database shows that AEs mainly occur when the fast-ion fraction P f /P total is less than 0.53 and v inj /v alfven is greater than 0.50, while low-frequency bursting modes appear in the opposite regime. In this research, P f and P total are the central fast-ion pressure from classical prediction and total plasma pressure, respectively. The reason why the instability transition correlates with P f /P total and v inj /v alfven is that they can significantly modify the drive of low-frequency bursting modes and AEs. The explanation is supported by the observation that low-frequency bursting modes are rarely seen in the hybrids with NBI only, with EC waves and counter-NBI, or with high plasma density. A careful check of the low-frequency bursting modes suggests that they are mainly chirping (neoclassical) tearing modes [referred to as chirping (N)TM], i.e. the mode frequency firstly jumps up from the steady (N)TM frequency, then chirps down, and finally returns to the steady (N)TM frequency. Sometimes, the (N)TMs are fully stabilized and replaced with pure fishbones. Lastly, the resonance condition calculation and ’Kick’ model simulations suggest that (N)TMs and fishbones can interact through modification of the fast ion distribution in phase space, which influences the drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Progress in disruption prevention for ITER

Key plasma physics and real-time control elements needed for robustly stable operation of high fusion power discharges in ITER have been shown in recent research worldwide. Recent analysis has identified the current density profile as the main drive for disruptive instabilities in discharges simulating ITER's baseline scenario with high and low external torque. Ongoing development of model-based profile control and active control of magnetohydrodynamic instabilities is improving the stability of multiple scenarios. Significant advances have been made toward real-time physics-based prediction of instabilities, including path-oriented analysis, active sensing, and machine learning techniques for prediction that are beginning to go beyond simple disruption mitigation trigger applications. Active intervention adds to prevention of disruptions, including forced rotation of magnetic islands to prevent wall locking, and localized heating/current drive to shrink the islands. Stable discharge rampdowns have been achieved with the fastest ITER-like scaled current ramp rates, while maintaining an X-point configuration. Moreover, these elements are being integrated into stable operating scenarios and new event-handling systems for off-normal events in order to develop the physics basis and techniques for robust control in ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2018

On Principles, Values, Metrics and Criteria for the Development of Magnetic Fusion Energy

Fusion energy holds the promise of providing abundant, safe, clean and environmentally sustainable power for the foreseeable future. Hence, fusion has enormous potential to benefit society if it can be developed into a commercial energy source in a timely manner. However, the task of developing fusion energy is a challenging endeavor and it is believed that it will take several decades in order to reach the final goal. Hence, it is imperative to develop a strategic plan and to periodically revise and update this plan. In 2017, the Department of Energy (DOE) Office of Fusion Energy Sciences (FES) commissioned the National Academy of Sciences (NAS) to provide a long term strategic plan for magnetic fusion energy (MFE). In turn, the MFE community mobilized to provide input to the NAS panel. This resulted in a series of US Magnetic Fusion Energy Research Strategic Directions (US MFRSD) Workshops.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Advances in the steady-state hybrid regime in DIII-D – a fully non-inductive, ELM-suppressed scenario for ITER

Here, the hybrid regime with beta, collisionality, safety factor and plasma shape relevant to the ITER steady-state mission has been successfully integrated with ELM suppression by applying an odd parity n=3 resonant magnetic perturbation (RMP). Fully non-inductive hybrids in the DIII-D tokamak with high beta (< β> ≤ 2.8%) and high confinement (H 98y2 ≤ 1.4) in the ITER similar shape have achieved zero surface loop voltage for up to two current relaxation times using efficient central current drive from ECCD and NBCD. The n=3 RMP causes surprisingly little increase in thermal transport during ELM suppression. Poloidal magnetic flux pumping in hybrid plasmas maintains q above 1 without loss of current drive efficiency, except that experiments show that extremely peaked ECCD profiles can create sawteeth. During ECCD, Alfvén eigenmode (AE) activity is replaced by a more benign fishbone-like mode, reducing anomalous beam ion diffusion by a factor of 2. While the electron and ion thermal diffusivities substantially increase with higher ECCD power, the loss of confinement can be offset by the decreased fast ion transport resulting from AE suppression. Extrapolations from DIII-D along a dimensionless parameter scaling path as well as those using self-consistent theory-based modeling show that these ELM-suppressed, fully non-inductive hybrids can achieve the Q fus = 5 ITER steady-state mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Helical core reconstruction of a DIII-D hybrid scenario tokamak discharge

Our paper presents the first fully 3-dimensional (3D) equilibrium reconstruction of a helical core in a tokamak device. Using a new parallel implementation of the Variational Moments Equilibrium Code (PARVMEC) coupled to V3FIT, 3D reconstructions can be performed at resolutions necessary to produce helical states in nominally axisymmetric tokamak equilibria. In a flux pumping experiment performed on DIII-D, an external n=1 field was applied while a 3/2 neoclassical tearing mode was suppressed using ECCD. The externally applied field was rotated past a set of fixed diagnostics at a 20 Hz frequency. Furthermore, the modulation, were found to be strongest in the core SXR and MSE channels, indicates a localized rotating 3D structure locked in phase with the applied field. Signals from multiple time slices are converted to a virtual rotation of modeled diagnostics adding 3D signal information. In starting from an axisymmetric equilibrium reconstruction solution, the reconstructed broader current profile flattens the q-profile, resulting in an m=1, n=1 perturbation of the magnetic axis that is $\sim 50\times $ larger than the applied n=1 deformation of the edge. Error propagation confirms that the displacement of the axis is much larger than the uncertainty in the axis position validating the helical equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Magnetic shear effects on plasma transport and turbulence at high electron to ion temperature ratio in DIII-D and JT-60U plasmas

We demonstrated negative magnetic shear in DIII-D and JT-60U in order to mitigate the confinement degradation typically observed with increasing the electron to ion temperature ratio (T-e/T-i). In recent experiments in DIII-D negative central magnetic shear (NCS) discharges, the thermal transport in the internal transport barrier formed around the radius of the minimum safety factor (q(min)) remained almost constant and modestly increased in the region outside of q(min) compared to the positive shear (PS) case, when T-e/T-i increased from about 0.8 to 1.1 through electron cyclotron heating (ECH). The benefit of NCS extending into the region outside of qmin can be explained by the lower magnetic shear in the NCS plasma over the plasma radius relative to the PS plasma. Reduced confinement degradation at high T-e/T-i with NCS plasmas was commonly observed in DIII-D and JT-60U. Furthermore, the mechanism of the different transport responses between the NCS and PS plasmas has been assessed in terms of fluctuation measurements and gyrokinetic simulations in DIII-D; NCS gave a smaller rise in the low-wavenumber broadband turbulent fluctuations with the increase in T-e/T-i compared with the PS case. This is consistent with gyrokinetic simulations, and this shows a smaller rise in the growth rates of the ion temperature gradient mode in the NCS plasmas, with increasing T-e/T-i. Gyrokinetic simulations also showed a change in the stability of the electron modes with ECH applied, consistent with higher-wavenumber fluctuation measurements, although more detailed simulations are needed to give a quantitative explanation for the experimental observations. Control of q-profile and magnetic shear will allow confinement improvement in future machines with dominant electron heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗