Search NASASearch

Engineering topics

Turkel, E.

Publications and source records attributed to Turkel, E..

At least 37 records · Page 2

Global collocation methods for approximation and the solution of partial differential equations

Polynomial interpolation methods are applied both to the approximation of functions and to the numerical solutions of hyperbolic and elliptic partial differential equations. The derivative matrix for a general sequence of the collocation points is constructed. The approximate derivative is then found by a matrix times vector multiply. The effects of several factors on the performance of these methods including the effect of different collocation points are then explored. The resolution of the schemes for both smooth functions and functions with steep gradients or discontinuities in some derivative are also studied. The accuracy when the gradients occur both near the center of the region and in the vicinity of the boundary is investigated. The importance of the aliasing limit on the resolution of the approximation is investigated in detail. Also examined is the effect of boundary treatment on the stability and accuracy of the scheme.

Solomonoff, A.

Stability and control of compressible flows over a surface with concave-conves curvature

The active control of spatially unstable disturbances in a laminar, two-dimensional, compressible boundary layer over a curved surface is numerically simulated. The control is effected by localized time-periodic surface heating. We consider two similar surfaces of different heights with concave-convex curvature. In one, the height is sufficiently large so that the favorable pressure gradient is sufficient to stabilize a particular disturbance. In the other case the pressure gradient induced by the curvature is destabilizing. It is shown that by using active control that the disturbance can be stabilized. The results demonstrate that the curvature induced mean pressure gradient significantly enhances the receptivity of the flow localized time-periodic surface heating and that this is a potentially viable mechanism in air.

Maestrello, L.

Numerical simulation of boundary-layer excitation by surface heating/cooling

The concept of active control of growing disturbances in an unstable compressible flow by using time periodic, localized surface heating is studied numerically. The simulations are calculated by a fourth-order accurate solution of the compressible, laminar Navier-Stokes equations. Fourth-order accuracy is particularly important for this problem because the solution must be computed over many wavelengths. The numerical results demonstrate the growth of an initially small fluctuation into the nonlinear regime where a local breakdown into smaller scale disturbances can be observed. It is shown that periodic surface heating over a small strip can reduce the level of the fluctuation provided that the phase of the heating current is properly chosen.

Bayliss, A.

On the interaction of a sound pulse with the shear layer on an axisymmetric jet. III - Non-linear effects

The fluctuating field of a jet excited by transient mass injection is simulated numerically. The model is developed by expanding the state vector as a mean state plus a fluctuating state. Nonlinear terms are not neglected, and the effect of nonlinearity is studied. A high order numerical method is used to compute the solution. The results show a significant spectral broadening in the flow field due to the nonlinearity. In addition, large scale structures are broken down into smaller scales.

Bayliss, A.

Pseudo-time algorithms for the Navier-Stokes equations

A pseudo-time method is introduced to integrate the compressible Navier-Stokes equations to a steady state. This method is a generalization of a method used by Crocco and also by Allen and Cheng. We show that for a simple heat equation that this is just a renormalization of the time. For a convection-diffusion equation the renormalization is dependent only on the viscous terms. We implement the method for the Navier-Stokes equations using a Runge-Kutta type algorithm. This permits the time step to be chosen based on the inviscid model only. We also discuss the use of residual smoothing when viscous terms are present.

Swanson, R. C.

A fourth order accurate finite difference scheme for the computation of elastic waves

A finite difference for elastic waves is introduced. The model is based on the first order system of equations for the velocities and stresses. The differencing is fourth order accurate on the spatial derivatives and second order accurate in time. The model is tested on a series of examples including the Lamb problem, scattering from plane interf aces and scattering from a fluid-elastic interface. The scheme is shown to be effective for these problems. The accuracy and stability is insensitive to the Poisson ratio. For the class of problems considered here it is found that the fourth order scheme requires for two-thirds to one-half the resolution of a typical second order scheme to give comparable accuracy.

Bayliss, A.

Preconditioned methods for solving the incompressible and low speed compressible equations

Acceleration methods are presented for solving the steady state incompressible equations. These systems are preconditioned by introducing artificial time derivatives which allow for a faster convergence to the steady state. The compressible equations in conservation form with slow flow are also considered. Two arbitrary functions, alpha and beta, are introduced in the general preconditioning. An analysis of this system is presented and an optimal value for beta is determined given a constant, alpha. It is further shown that the resultant incompressible equations form a symmetric hyperbolic system and so are well posed. Several generalizations to the compressible equations are presented which generalize previous results.

Turkel, E.

Application of a Runge-Kutta scheme for high-speed inviscid internal flows

A multi-stage Runge-Kutta method is analyzed for solving the two-dimensional Euler equations for external and internal flow problems. Subsonic, supersonic and, highly supersonic flows are studied. Various techniques for accelerating the convergence to a steady state are described and analyzed. Effects of the grid aspect ratio on the rate of convergence are evaluated. An enthalpy damping technique applicable to supersonic flows is described in detail. Numerical results for supersonic flows containing both oblique and normal shocks are presented confirming the efficiency of the method.

Moitra, A.

Accuracy of schemes for the Euler equations with non-uniform meshers

The effect of nonuniform grids on the solution of the Euler equations is analyzed. A Runge-Kutta type scheme is considered based on a finite volume formuation. It is shown that for arbitrary grids the scheme can be inconsistent even though it is second-order accurate for uniform grids. An improvement is suggested which leads to at least first-order accuracy for general grids. Test cases are pesented in both two- and three-space dimensions. Applications to finite difference and impicit algorithms are also given.

Turkel, E.

Application of Runge-Kutta scheme for high-speed inviscid internal flows

A multi-stage Runge-Kutta method is analyzed for solving the two-dimensional Euler equations for external and internal flow problems. Subsonic, supersonic and, highly supersonic flows are studied. Various techniques for accelerating the convergence to a steady state are described and analyzed. Effects of the grid aspect ratio on the rate of convergence are evaluated. An enthalpy damping technique applicable to supersonic flows is described in detail. Numerical results for supersonic flows containing both oblique and normal shocks are presented confirming the efficiency of the method.

Moitra, A.

Accuracy of schemes for the Euler equations with non-uniform meshes

The effect of non-uniform grids on the solution of the Euler equations is analyzed. A Runge-Kutta type scheme based on a finite volume formulation is considered. It is shown that for arbitrary grids the scheme can be inconsistent even though it is second-order accurate for uniform grids. An improvement is suggested which leads to at least first-order accuracy for general grids. Test cases are presented in both two- and three-space dimensions. Applications to finite difference and implicit algorithms are also given.

Turkel, E.

Active control of compressible flows on a curved surface

The effect of localized, time periodic surface heating and cooling over a curved surface is studied. This is a mechanism for the active control of unstable disturbances by phase cancellation and reinforcement. It is shown that the pressure gradient induced by the curvature significantly enhances the effectiveness of this form of active control. In particular, by appropriate choice of phase, active surface heating can completely stabilize and unstable wave.

Maestrello, L.

Wave phenomena in a high Reynolds number compressible boundary layer

Growth of unstable disturbances in a high Reynolds number compressible boundary layer is numerically simulated. Localized periodic surface heating and cooling as a means of active control of these disturbances is studied. It is shown that compressibility in itself stabilizes the flow but at a lower Mach number, significant nonlinear distortions are produced. Phase cancellation is shown to be an effective mechanism for active boundary layer control.

Bayliss, A.

A fourth-order scheme for the unsteady compressible Navier-Stokes equations

A computational scheme is described which is second-order accurate in time and fourth-order accurate in space (2-4). This method is applied to study the stability of compressible boundary layers. The laminar compressible Navier-Stokes equations are solved with a time harmonic inflow superimposed on the steady state solution. This results in spatially unstable modes. It is shown that the second-order methods are inefficient for calculating the growth rates and phases of the unstable modes. In contrast the fourth-order method yields accurate results on relatively course meshes.

Bayliss, A.

Active control of compressible flows on a curved surface

The effect of localized, time periodic surface heating and cooling over a curved surface is studied. This is a mechanism for the active control of unstable disturbances by phase cancellation and reinforcement. It is shown that the pressure gradient induced by the curvature significantly enhances the effectiveness of this form of active control. In particular, by appropriate choice of phase, active surface heating can completely stabilize an unstable wave.

Maestrello, L.

Accuracy of schemes with nonuniform meshes for compressible fluid flows

The accuracy of the space discretization for time-dependent problems when a nonuniform mesh is used is considered. Many schemes reduce to first-order accuracy while a popular finite volume scheme is even inconsistent for general grids. This accuracy is based on physical variables. However, when accuracy is measured in computational variables then second-order accuracy can be obtained. This is meaningful only if the mesh accurately reflects the properties of the solution. In addition, the stability properties of some improved accurate schemes are analyzed and it can be shown that they also allow for larger time steps when Runge-Kutta type methods are used to advance in time.

Turkel, E.

Long-time asymptotics of a system for plasma diffusion

A system of parabolic nonlinear equations that describe the diffusion of a fully collisional plasma across a strong magnetic field is discussed. It is demonstrated that the solution to this system tends to a time asymptotic state which is of space-time separable form, theta(t)f(x). Furthermore, f(x) is independent of the initial conditions and theta(t) depends slightly on the initial conditions. The rate of decay of the temporal part is governed by a nonlinear eigenvalue problem. Since the equations are considered in a bounded domain we are able to analyze the effect of boundary conditions on the evolution of the system. Additional effects on radiation, heating, and particle injection can also be accounted for. Essential differences between the behavior of a fully-coupled system and a scalar equation are observed.

Rosenau, P.

A fourth-order scheme for the unsteady compressible Navier-Stokes equations

A computational scheme is described which is second-order accurate in time and fourth-order accurate in space (2-4). This method is applied to study the stability of compressible boundary layers. The laminar compressible Navier-Stokes equations are solved with a time harmonic inflow superimposed on the steady state solution. This results in spatially unstable modes. It is shown that the second-order methods are inefficient for calculating the growth rates and phases of the unstable modes. In contrast the fourth-order method yields accurate results on relatively coarse meshes.

Bayliss, A.