Engineering topics

Turner, B. J.

Publications and source records attributed to Turner, B. J..

15 records

NASA NTRS1994

Identification of turbulence structures above a forest canopy using a wavelet transform

The wavelet transform is used to identify scales of large coherent structures present in atmospheric turbulence above the subarctic forest at Schefferville. Individual coherent structures contributing to much of the exchange between the forest and the atmosphere are depicted in terms of both scale and location using contour diagrams of wavelet transform coefficients. Three typical case studies of turbulence and flux observations were selected to examine the physical characteristics of these flux-filled events and their evolution with distance away from the forest canopy. A wavelet transform spectral technique is applied to vertical velocity, temperature, and turbulent heat flux data observed over the sparse coniferous forest to extract the relative importance of each scale present in those data series. The scale of turbulence structures in relation with their characteristic spacing is discussed.

Turner, B. J.↗

NASA NTRS1993

Spatial variability of summer Florida precipitation and its impact on microwave radiometer rainfall-measurement systems

Three-dimensional radar data for three summer Florida storms are used as input to a microwave radiative transfer model. The model simulates microwave brightness observations by a 19-GHz, nadir-pointing, satellite-borne microwave radiometer. The statistical distribution of rainfall rates for the storms studied, and therefore the optimal conversion between microwave brightness temperatures and rainfall rates, was found to be highly sensitive to the spatial resolution at which observations were made. The optimum relation between the two quantities was less sensitive to the details of the vertical profile of precipitation. Rainfall retrievals were made for a range of microwave sensor footprint sizes. From these simulations, spatial sampling-error estimates were made for microwave radiometers over a range of field-of-view sizes. The necessity of matching the spatial resolution of ground truth to radiometer footprint size is emphasized. A strategy for the combined use of raingages, ground-based radar, microwave, and visible-infrared (VIS-IR) satellite sensors is discussed.

Turner, B. J.↗

NASA NTRS1982

Development of a data management front-end for use with a LANDSAT-based information system

The development and implementation of a data management front-end system for use with a LANDSAT based information system that facilitates the processsing of both LANDSAT and ancillary data was examined. The final tasks, reported on here, involved; (1) the implementation of the VICAR image processing software system at Penn State and the development of a user-friendly front-end for this system; (2) the implementation of JPL-developed software based on VICAR, for mosaicking LANDSAT scenes; (3) the creation and storage of a mosiac of 1981 summer LANDSAT data for the entire state of Pennsylvania; (4) demonstrations of the defoliation assessment procedure for Perry and Centre Counties, and presentation of the results at the 1982 National Gypsy Moth Review Meeting, and (5) the training of Pennsylvania Bureau of Forestry personnel in the use of the defoliation analysis system.

Turner, B. J.↗

NASA NTRS1982

Development of a data management front end for use with a LANDSAT based information system

A user friendly front end was constructed to facilitate access to the LANDSAT mosaic data base supplied by JPL and to process both LANDSAT and ancillary data. Archieval and retrieval techniques were developed to efficiently handle this data base and make it compatible with requirements of the Pennsylvania Bureau of Forestry. Procedures are ready for: (1) forming the forest/nonforest mask in ORSER compressed map format using GSFC-supplied classification procedures; (2) registering data from a new scene (defoliated) to the mask (which may involve mosaicking if the area encompasses two LANDSAT scenes; (3) producing a masked new data set using the MASK program; (4) analyzing this data set to produce a map showing degrees of defoliation, output on the Versatec plotter; and (5) producing color composite maps by a diazo-type process.

Turner, B. J.↗

NASA NTRS1982

The ORSER LANDSAT Data Base of Pennsylvania

A mosaicked LANDSAT data base for Pennsylvania, installed at the computation center of the Pennsylvania State University is described. Initially constructed by Penn State's Office for Remote Sensing of Earth Resources (ORSER) for the purpose of assisting in state-wide mapping of gypsy moth defoliation, the data base will be available to a variety of potential users. It will provide geometrically correct LANDSAT data accessible by political, jurisdictional, or arbitrary boundaries.

Turner, B. J.↗

NASA NTRS1981

The ORSER System for the Analysis of Remotely Sensed Digital Data

The main effort of the University of Pennsylvania's Office for Remote Sensing of Earth Resources (ORSER) is the processing, analysis, and interpretation of multispectral data, most often supplied by NASA in the form of imagery and digital data. The facilities used for data reduction and image enhancement are described as well as the development of algorithms for producing a computer map showing various environmental and land use characteristics of data points in the analyzed scenes. The application of an (ORSER) capability for statewide monitoring of gypsy moth defoliation is discussed.

Myers, W. L.↗

NASA NTRS1981

ICAP - An Interactive Cluster Analysis Procedure for analyzing remotely sensed data

An Interactive Cluster Analysis Procedure (ICAP) was developed to derive classifier training statistics from remotely sensed data. ICAP differs from conventional clustering algorithms by allowing the analyst to optimize the cluster configuration by inspection, rather than by manipulating process parameters. Control of the clustering process alternates between the algorithm, which creates new centroids and forms clusters, and the analyst, who can evaluate and elect to modify the cluster structure. Clusters can be deleted, or lumped together pairwise, or new centroids can be added. A summary of the cluster statistics can be requested to facilitate cluster manipulation. The principal advantage of this approach is that it allows prior information (when available) to be used directly in the analysis, since the analyst interacts with ICAP in a straightforward manner, using basic terms with which he is more likely to be familiar. Results from testing ICAP showed that an informed use of ICAP can improve classification, as compared to an existing cluster analysis procedure.

Wharton, S. W.↗

NASA NTRS1981

Development of computer software to analyze entire LANDSAT scenes and to summarize classification results of variable-size polygons

The Forest Pest Management Division (FPMD) of the Pennsylvania Bureau of Forestry has the responsibility for conducting annual surveys of the State's forest lands to accurately detect, map, and appraise forest insect infestations. A standardized, timely, and cost-effective method of accurately surveying forests and their condition should enhance the probability of suppressing infestations. The repetitive and synoptic coverage provided by LANDSAT (formerly ERTS) makes such satellite-derived data potentially attractive as a survey medium for monitoring forest insect damage over large areas. Forest Pest Management Division personnel have expressed keen interest in LANDSAT data and have informally cooperated with NASA/Goddard Space Flight Center (GSFC) since 1976 in the development of techniques to facilitate their use. The results of this work indicate that it may be feasible to use LANDSAT digital data to conduct annual surveys of insect defoliation of hardwood forests.

Turner, B. J.↗

NASA NTRS1981

Some considerations in low-cost image processing on a university main frame: The Penn State (ORSER) experience

The ORSER System as implemented on the Penn State University Computation Center's IBM main frame is an exceptionally useful mechanism for instructing the present and future remote sensing community in the theory and practice of automated analysis of digitized data. From its beginning, the system was used as the hands-on back-bone of a graduate level "Multispectral Remote Sensing" one-term course taught annually in the School of Forest Resources. It was also used at the end of a senior-level undergraduate "Introduction to Remote Sensing" course, and in teaching a variety of short courses, ranging in length from a few days for small groups of remote sensing consultants with specific application interests, to a 2-week course oganized by NASA for regional and urban planners who had little or no previous exposure to remote sensing. Because of its modular construction, the ORSER is suitable for all classes of remote sensing users. Although in a beginning course only 6 to 10 of the programs are generally used, the researcher has a set of about 35 programs available for his analyses.

Turner, B. J.↗

NASA NTRS1981

Recent developments with the ORSER system

Additions to the ORSER remote sensing data processing package are described. The ORSER package consists of about 35 individual programs that are grouped into preprocessing, data analysis, and display subsystems. Additional data formats and data management, data transformation, and geometric correlation programs were supplemented to the preprocessing subsystem. Enhancements to the data analysis techniques include a maximum likelihood classifier (MAXCLASS) and a new version of the STATS program which makes delineation of training areas easier and allows for detection of outlier points. Ongoing developments are also described.

Baumer, G. M.↗

NASA NTRS1975