Search NASA⌕ Search

Engineering topics

Tyagi, Madhusudan

Publications and source records attributed to Tyagi, Madhusudan.

At least 19 records

Optimizing protic ionic liquid electrolyte for pre-intercalated Ti 3 C 2 T x MXene supercapacitor electrodes

Electrical double-layer capacitors (EDLCs) are of increasing importance in energy storage from renewable sources. The properties of the electrode and electrolyte materials influence the energy and power densities of EDLCs. We examined the specific capacitance and ion dynamics of a protic ionic liquid confined in pre-intercalated Ti 3 C 2 T x MXene. Our electrochemical measurements demonstrated that the creation of a protic ionic liquid, 1-butyl-3-H-imidazolium bis(trifluoromethanesulfonyl)imide (BuIMH-NTf2), using a mixture of ionic liquid, 1-butyl imidazole (BuIM), and salt, bis(trifluoromethanesulfonyl)imide (HNTf2), in a ratio of 0.8:0.2 led to the optimal capacitance. Remarkably, quasi-elastic neutron scattering measurements revealed increased particle mobility at this composition, attributed to the more efficient accumulation of BuIMH + on the electrode surface. This deposit of additional ions results in fewer BuIM molecules away from the surface, enhancing their mobility due to reduced crowding. This composition-dependent electrochemical behavior will guide the formulation of more efficient protic ionic liquid systems, enabling faster ion transport in energy storage devices.

36 MATERIALS SCIENCE↗

Dynamic entity formed by protein and its hydration water

The interaction between protein and water plays a pivotal role in shaping the structure, dynamics, and function of biomacromolecules. A comprehensive understanding of this intricate interplay necessitates a systematic evaluation of interaction strength and its consequential impact on the dynamics of proteins and water across diverse protein systems. Despite numerous works on understanding the dynamics of water and proteins and the coupling between them, there are still unanswered questions. Here, we combine neutron scattering and isotope labeling to probe the dynamics of proteins and their hydration water in a variety of protein systems. We consider proteins of different structures and varying thermostability as well as proteins within living cells with distinct growth temperatures. Simultaneous characterization of protein and hydration water dynamics across diverse systems was achieved. Moreover, we performed water sorption isothermal measurements on three representative proteins to correlate the observed dynamics with the strength of the interaction energies governing each system. The experimental results underscore that proteins manifesting stronger attractive interactions with water display diffusionlike dynamics with higher flexibility upon hydration, concomitant with a reduced mobility in hydration water. Significantly, our findings suggest that, in fact, it is the interaction between protein and its hydration water that facilitates the transfer of mobility from water to protein, with stronger interactions correlating to greater protein flexibility and slower hydration water diffusion. Published by the American Physical Society 2024

Ye, Yongfeng (ORCID:0009000792374198)↗

Decoupling of the onset of anharmonicity between a protein and its surface water around 200 K

The protein dynamical transition at ~200 K, where the biomolecule transforms from a harmonic, non-functional form to an anharmonic, functional state, has been thought to be slaved to the thermal activation of dynamics in its surface hydration water. Here, by selectively probing the dynamics of protein and hydration water using elastic neutron scattering and isotopic labeling, we found that the onset of anharmonicity in the two components around 200 K is decoupled. The one in protein is an intrinsic transition, whose characteristic temperature is independent of the instrumental resolution time, but varies with the biomolecular structure and the amount of hydration, while the one of water is merely a resolution effect.

59 BASIC BIOLOGICAL SCIENCES↗

Origin of rate limitations in solid-state polymer batteries from constrained segmental dynamics within the cathode

Currently, one of the key challenges preventing the wide commercialization of polymer-based solid-state batteries is achieving high-rate capabilities. This work unravels chain structure and segmental dynamics in a polymer-based composite cathode consisting of LiFePO 4 (LFP), carbon, and poly(ethylene oxide) (PEO) with lithium bis(trifluoromethanesulfonyl)imide. Small-angle neutron scattering (SANS) data reveal that PEO chains are adsorbed on the surface of LFP particles during slurry processing to make the composite electrode. The strong interaction between LFP and PEO chains leads to greatly reduced segmental dynamics of PEO, as discovered by quasi-elastic neutron scattering (QENS). The reduced segmental dynamics results in 70% decreased Li + mobility of the polymer electrolyte in the composite cathode. The combined SANS and QENS study indicates that one of the key bottlenecks that limits the rate performance of PEO-based polymer batteries originates from molecular interactions within the cathode.

25 ENERGY STORAGE↗

A Sustainable Multi-Dimensional Printable Material

Polymeric materials are usually tailored for specific functionality. A single polymer exhibiting multiple simultaneous functionalities often requires intricate molecular architecture, which is difficult to manufacture at scale because of its complex synthesis routes. In this work, a facile, partly renewable composition—prepared via reactive melt processing—that induces tunable functionalities such as 3D printability, shape recovery, and self-healing while exhibiting satisfactory mechanical properties is reported. The system with a hydrogen-bonded 3D network consists of thermally reversible nano-scale agglomerates of sustainable, rigid phenolic oligomers and crystallizable flexible polymer. Local molecular mobility and temperature-dependent relaxation and recovery of the non-equilibrium networked states enable exploiting these simultaneous functionalities. Transitions involving solidification and structure stabilization at ambient temperature spanning several hours after preheating only at 70 °C directly contrast typical thermoplastic or thermoplastic elastomer behaviors. Results from this study can inform the design of future rheology modifiers and materials for soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

All-temperature zinc batteries with high-entropy aqueous electrolyte

Electrification of transportation and rising demand for grid energy storage continue to build momentum around batteries across the globe. However, the supply chain of Li-ion batteries is exposed to the increasing challenges of resourcing essential and scarce materials. Therefore, incentives to develop more sustainable battery chemistries are growing. Here, in this paper, we show an aqueous ZnCl 2 electrolyte with introduced LiCl as supporting salt. Once the electrolyte is optimized to Li 2 ZnCl 4 ∙9H 2 O, the assembled Zn–air battery can sustain stable cycling over the course of 800 hours at a current density of 0.4 mA cm -2 between -60 °C and +80 °C, with 100% Coulombic efficiency for Zn stripping/plating. Even at -60 °C, >80% of room-temperature power density can be retained. Advanced characterization and theoretical calculations reveal a high-entropy solvation structure that is responsible for the excellent performance. The strong acidity allows ZnCl 2 to accept donated Cl - ions to form ZnCl 4 2- anions, while water molecules remain within the free solvent network at low salt concentration or coordinate with Li ions. Our work suggests an effective strategy for the rational design of electrolytes that could enable next-generation Zn batteries.

25 ENERGY STORAGE↗

Exceptionally Fast Ion Diffusion in Block Copolymer-Based Porous Carbon Fibers

Confined ionic liquids in hydrophilic porous media have disrupted lattices and can be divided into two layers: An immobile ion layer adheres to the pore surfaces, and an inner layer exhibits faster mobility than the bulk. In this work, we report the first study of ionic liquids confined in block copolymer-based porous carbon fibers (PCFs) synthesized from polyacrylonitrile-block-polymethyl methacrylate (PAN-b-PMMA). The PCFs contain a network of unimodal mesopores of 13.6 nm in diameter and contain more hydrophilic surface functional groups than previously studied porous carbon. Elastic neutron scattering shows no freezing point for 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF 4 ) confined in PCFs down to 20 K. Quasi-elastic neutron scattering (QENS) is used to measure the diffusion of [BMIM]BF 4 confined in PCFs, which, surprisingly, is 7-fold faster than in the bulk. The unprecedentedly high ion diffusion remarks that PCFs hold exceptional potential for use in electrochemical catalysis, energy conversion, and storage.

36 MATERIALS SCIENCE↗

Understanding the Impacts of Support–Polymer Interactions on the Dynamics of Poly(ethyleneimine) Confined in Mesoporous SBA-15

Supported amines are a promising class of CO 2 sorbents offering large uptake capacities and fast uptake rates. Additionally, among supported amines, poly(ethyleneimine) (PEI) physically impregnated in the mesopores of SBA-15 silica is widely used. Within these composite materials, the chain dynamics and morphologies of PEI strongly influence the CO 2 capture performance, yet little is known about chain and macromolecule mobility in confined pores. Here, we probe the impact of the support–PEI interactions on the dynamics and structures of PEI at the support interface and the corresponding impact on CO 2 uptake performance, which yields critical structure–property relationships. The pore walls of the support are grafted with organosilanes with different chemical end groups to differentiate interaction modes (spanning from strong attraction to repulsion) between the pore surface and PEI. Combinations of techniques, such as quasi-elastic neutron scattering (QENS), 1 H T 1 –T 2 relaxation correlation solid-state NMR, and molecular dynamics (MD) simulations, are used to comprehensively assess the physical properties of confined PEI. We hypothesized that PEI would have faster dynamics when subjected to less attractive or repulsive interactions. However, we discover that complex interfacial interactions resulted in complex structure–property relationships. Indeed, both the chain conformation of the surface-grafted chains and of the PEI around the surface influenced the chain mobility and CO 2 uptake performance. By coupling knowledge of the dynamics and distributions of PEI with CO 2 sorption performance and other characteristics, we determine that the macroscopic structures of the hybrid materials dictate the first rapid CO 2 uptake, and the rate of CO 2 sorption during the subsequent gradual uptake stage is determined by PEI chain motions that promote diffusive jumps of CO 2 through PEI-packed domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the water dynamics near hydrophilic, nanostructured CuO surfaces by quasielastic and inelastic neutron scattering

We have used quasielastic and inelastic neutron scattering to investigate the structure, dynamics, and phase transitions of water interacting with superhydrophilic CuO surfaces that not only possess a strong affinity for water but also a “grass-like” topography that is rough on both micro- and nanoscales. Here, we report quasielastic neutron scattering (QENS) measurements on two samples differing in water content at five temperatures below 280 K. The QENS spectra show water undergoing two different types of diffusive motion near the CuO surfaces: a “slow” translational diffusion occurring on a nanosecond time scale and a faster rotational motion. Further from the surfaces, there is “fast” translational diffusion comparable in rate to that of bulk supercooled water and the rotational motion occurring in the interfacial water. Analysis of the QENS spectra supports wetting of water to the CuO blades as seen in electron microscopy images. In addition, we observe an anomalous temperature dependence of the QENS spectra on cooling from 270 to 230 K with features consistent with a liquid–liquid phase transition. We suggest that the solvent-like properties of the coexisting bulk-like water in our CuO samples are a significant factor in determining the temperature dependence of the interfacial water’s dynamics. Our results are compared with those obtained from two well-studied substrate classes: (1) silicas that contain ordered cylindrical nanopores but have weaker hydrophilicity and (2) nanoparticles of other transition-metal oxides, such as TiO 2 , which share the strong hydrophilicity of our samples but lack their porosity.

36 MATERIALS SCIENCE↗

Direct Correlation of the Salt-Reduced Diffusivities of Organic Solvents with the Solvent’s Mole Fraction

We report that lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in organic solvents (especially propylene carbonate) has demonstrated extraordinary pseudocapacitive performance as an electrolyte in the supercapacitor configuration. However, the influence of the solvated ions on the diffusivity of the solvent molecules is yet to be understood. We examine the impact of LiTFSI on the diffusivity in five organic solvents: acetonitrile (ACN), tetrahydrofuran (THF), methanol (MeOH), dimethyl sulfoxide (DMSO), and propylene carbonate (PC) using a combination of neutron scattering, conductivity measurements, and molecular dynamics simulations. The extent of the diffusivity reduction in the concentration regime of ≤1 M directly correlates with the solvent mole fraction at which the solvation shells around Li + ions are of similar size in all the solvents, resulting in a universal ~50% reduction in the solvent diffusivity. These results provide guidance for formulation of the new electrolytes to enhance the performance of energy storage devices.

conductivity↗

Beyond Simple Dilution: Superior Conductivities from Cosolvation of Acetonitrile/LiTFSI Concentrated Solution with Acetone

Concentrated solutions of Li salts in acetonitrile are promising alternative electrolytes for the next generation of Li batteries as they may exhibit superior electrochemical properties. However, the reduced mobility of the chemical species is a barrier yet to be overcome, and for this, we explore the utilization of acetone as a cosolvent. Although acetone is a polar compound, we find that its addition to the LiTFSI/acetonitrile solution does not follow the trends expected for a simple dilution process. At a low concentration, acetone subtly shifts acetonitrile from the first to extended solvation sheaths of the ions. Still, most of the original structure of the solution is preserved, and mobile high-concentration clusters are formed in the solution. At higher concentrations, the cosolvation promotes cation–anion interactions but with a different nature from those in the original solution and still allows for a further increase in conductivity. Additionally, the non-coordinating fraction of acetonitrile acquires features resembling the pure solvent, which is a possible additional facilitating factor for ionic diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating Broadband Photoluminescence with Structural Dynamics in Layered Hybrid Halide Perovskites

The emission of white light from a single material is atypical and is of interest for solid-state lighting applications. Broadband light emission has been observed in some layered perovskite derivatives, A 2 PbBr 4 (A = R-NH 3 + ), and correlates with static structural distortions corresponding to out-of-plane tilting of the lead bromide octahedra. While materials with different organic cations can yield distinct out-of-plane tilts, the underlying origin of the octahedral tilting remains poorly understood. Using high energy resolution (e.g., quasi-elastic) neutron scattering, this contribution details the rotational dynamics of the organic cations in A 2 PbBr 4 materials where A = n-butylammonium (nBA), 1,8-diaminooctammonium (ODA), and 4-aminobutyric acid (GABA). The organic cation dynamics differentiate (nBA) 2 PbBr 4 from (ODA)PbBr 4 or (GABA) 2 PbBr 4 in that the larger spatial extent of dynamics of nBA yields a larger effective cation radius. The larger effective volume of the nBA cation in (nBA) 2 PbBr 4 yields a closer to ideal A-site geometry, preventing the out-of-plane tilt and broadband luminescence. In all three compounds, we observe hydrogen dynamics attributed to rotation of the ammonium headgroup and at a time scale faster than the white light photoluminescence studied by time-correlated single photon counting spectroscopy. This supports a previous assignment of the broadband emission as resulting from a single ensemble, such that the emissive excited state experiences many local structures faster than the emissive decay. Furthermore, the findings presented here highlight the role of the organic cation and its dynamics in hybrid organic–inorganic perovskites and white light emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolution of microscopic heterogeneity and dynamics in choline chloride-based deep eutectic solvents

Deep eutectic solvents (DESs) are an emerging class of non-aqueous solvents that are potentially scalable, easy to prepare and functionalize for many applications ranging from biomass processing to energy storage technologies. Predictive understanding of the fundamental correlations between local structure and macroscopic properties is needed to exploit the large design space and tunability of DESs for specific applications. Here, we employ a range of computational and experimental techniques that span length-scales from molecular to macroscopic and timescales from picoseconds to seconds to study the evolution of structure and dynamics in model DESs, namely Glyceline and Ethaline, starting from the parent compounds. We show that systematic addition of choline chloride leads to microscopic heterogeneities that alter the primary structural relaxation in glycerol and ethylene glycol and result in new dynamic modes that are strongly correlated to the macroscopic properties of the DES formed.

36 MATERIALS SCIENCE↗

Structural and Dynamical Roles of Bound Polymer Chains in Rubber Reinforcement

The addition of nanofillers to rubber matrices is a powerful route to improve the mechanical properties. Here, we focus on a molecular understanding of basic mechanisms that are important for the reinforcement in rubbers. The key role in this process is ascribed to bound rubber (BR) that engages with the matrix as well as with adjacent nanofillers. To date, this understanding has been impeded by the lack of experimental tools to directly probe the BR chains buried in a polymer matrix composed of the same polymer. To tackle this challenge, we combine neutron scattering/spectroscopy techniques with isotope-labeling and molecular dynamics simulations. The system is a simplified carbon-black-filled polybutadiene. The combined experimental and computational results provide new insights into the local structural and dynamical heterogeneities of BR chains and their interactions with the matrix polymer, highlighting (i) the structural partition of the bound chains into three components (i.e., trains, loops, and tails) and their fractions; (ii) their dynamical hierarchies, i.e., the trains that remain immobile on the filler surface, the loops that are fairly large and hence allow the interdigitation of matrix chains, and the tails with their unique characteristics to reach far out into the matrix and entangle with matrix chains. These multiple roles of the constituent components of the BR chains promote the formation of a well-developed adhesive polymer–filler interface, enhancing the elastic property of a filled rubber. Finally, the comprehensive understanding derived and validated by the model rubber will be translatable to many other polymer nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Architectures Can Alter the Dynamics of Polymer–Nanoparticle Composites

Polymer nanocomposites exhibit remarkable physical properties that are attractive for many applications. These systems have been so far investigated by using linear polymer chains; the role of polymer matrix architecture on local dynamics, bulk rheology and nanoparticle motion remains unexplored. Here, using quasielastic neutron scattering, bulk rheology and x-ray photon correlation spectroscopy, we investigated nanocomposites with spherical silica nanoparticles well dispersed in poly (ethylene oxide) matrices having different architectures (specifically linear, stars and hyperbranched). The results reveal that the mechanical reinforcement of the nanocomposites with the nonlinear polymers can be altered by orders of magnitude with respect to the conventional nanocomposite with the linear polymer. Additionally, the polymer compactness and inter-penetrability are found to play crucial roles in determining their bulk rheology. At microscopic level, average segmental dynamics is remarkably slowed down by the attractive NPs in the matrices of high degree of branching whereas no significant effect is observed in linear polymer matrix at the same NP loading. In addition, the nanoscale dynamics of particles in the compact nonlinear matrices exhibit strong decoupling from the bulk viscoelasticity, allowing their fast relaxation even at ≈ 30% by volume. These results provide an experimental evidence that macromolecular architecture is a powerful new tool for tuning the bulk rheological properties as well as the nanoscale dynamics of PNCs without the need for changing polymer molecular weight, nanoparticle size, shape, loading or dispersion state.

36 MATERIALS SCIENCE↗