Search NASA⌕ Search

Engineering topics

Tylczak, J

Publications and source records attributed to Tylczak, J.

At least 19 records

Oxy-Combustion Environment Characterization: Fire- and Steam-Side Corrosion in Advanced Combustion

Oxy-fuel combustion is burning a fuel in oxygen rather than air. The low nitrogen flue gas that results is relatively easy to capture CO{sub 2} from for reuse or sequestration. Corrosion issues associated with the environment change (replacement of much of the N{sub 2} with CO{sub 2} and higher sulfur levels) from air- to oxy-firing were examined. Alloys studied included model Fe-Cr alloys and commercial ferritic steels, austenitic steels, and nickel base superalloys. The corrosion behavior is described in terms of corrosion rates, scale morphologies, and scale/ash interactions for the different environmental conditions. Additionally, the progress towards laboratory oxidation tests in advanced ultra-supercritical steam is updated.

20 FOSSIL-FUELED POWER PLANTS↗

GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108

The goals are to: (1) Achieve 90% CO{sub 2} capture at no more than a 35% increase in levelized cost of electricity of post-combustion capture for new and existing conventional coal-fired power plants; (2) Provide high-temperature corrosion information to aid in materials development and selection for oxy-fuel combustion; and (3) Identify corrosion mechanism and behavior differences between air- and oxy-firing.

54 ENVIRONMENTAL SCIENCES↗

Fireside Corrosion in Oxy-fuel Combustion of Coal

Oxy-fuel combustion is burning a fuel in oxygen rather than air. The low nitrogen flue gas that results is relatively easy to capture CO{sub 2} from for reuse or sequestration. Corrosion issues associated with the environment change (replacement of much of the N{sub 2} with CO{sub 2} and higher sulfur levels) from air- to oxy-firing were examined. Alloys studied included model Fe-Cr alloys and commercial ferritic steels, austenitic steels, and nickel base superalloys. The corrosion behavior is described in terms of corrosion rates, scale morphologies, and scale/ash interactions for the different environmental conditions.

01 COAL, LIGNITE, AND PEAT↗

Surface and Electrochemical Behavior of HSLA in Supercritical CO2-H2O Environment

General corrosion was observed on high strength low alloy carbon steel after electrochemical impedance spectroscopy experiments (EIS) performed in H{sub 2}O saturated with CO{sub 2} at 50 C and 15.2 MPa. However, general and localized were observed on the same material surfaces after the EIS experiments performed in supercritical CO{sub 2} containing approximately 6100 ppmv H{sub 2}O at 50 C and 15.2 MPa. The general corrosion areas were uniformly covered by the FeCO{sub 3}-like phase identified by X-ray diffraction (XRD). In the area of localized corrosion, XRD also revealed FeCO{sub 3}-rich islands embedded in {alpha}-iron. The energy dispersive X-ray (EDX) analysis revealed high concentrations of iron, carbon, and oxygen in the area affected by general corrosion and in the islands formed in the area of localized corrosion. The real and imaginary impedances were lower in H{sub 2}O saturated with CO{sub 2} than those in the supercritical CO{sub 2} containing the aqueous phase indicating faster corrosion kinetics in the former.

36 MATERIALS SCIENCE↗

Surface Studies of HSLA [high strength low alloy] Steel after Electrochemical Corrosion in Supercritical CO{sub 2}-H{sub 2}O Environment

Corrosion resistance of pipeline materials for transporting coal combustion produced supercritical CO{sub 2} from power plants to sequestration sites has not been fully determined. Although pipeline materials are resistant to corrosion in pure supercritical CO{sub 2}, cleaning costs of combustion produced CO{sub 2} streams from impurities such as H{sub 2}O, O{sub 2}, SO{sub 2} are too high, making sequestration of pure CO{sub 2} streams unfeasible. Impacts of the H{sub 2}O, O{sub 2}, SO{sub 2} impurities on pipeline corrosion must be determined. Filling Up This Technological Gap requires studying effects of H{sub 2}O, O{sub 2}, SO{sub 2} concentrations on pipeline.

20 FOSSIL-FUELED POWER PLANTS↗

Fireside Corrosion in Oxy-Fuel Combustion of Coal

The goal is to develop technologies for pulverized coal boilers with >90% CO{sub 2} capture and sequestration and <35% increase in the cost of electricity. Air-fired power plant experience shows a corrosion loss max at 680-700 C. Low melting point alkali metal trisulfates, such as (K,Na){sub 3}Fe(SO{sub 4}){sub 3}, become thermally unstable above this temperature range. Some overall conclusions are: (1) CO{sub 2} + 30% H{sub 2}O more corrosive than Ar + 30% H{sub 2}O; (2) Excess O{sub 2} in H{sub 2}O can, in some cases, greatly increase oxidation; (3) Coal ash is generally innocuous without SO{sub 3}3 in gas phase; and (4) Long-term exposures are starting to establish differences between air-firing and oxy-firing conditions.

01 COAL, LIGNITE, AND PEAT↗

Surface Studies of HSLA Steel after Electrochemical Corrosion in Supercritical CO2-H2O Environment

In aqueous phase saturated with CO2, X-65 sample underwent general corrosion with formation of FeCO3. In supercritical CO2 containing water phase, two major regions are present on the sample surface after the EIS experiment. One region covered with corrosion products identified as FeCO3 and the other containing Fe, oxygen, and carbon-rich islands embedded in metal matrix identified as {alpha}-Fe. Precipitation of FeCO3 from Fe2+ and CO3 2- is responsible for formation of passive layer in oxygen-deficient, CO2 rich aqueous environment. Mechanisms of corrosion degradation occurring in supercritical CO2 as a function. Transport of supercritical CO{sub 2} is a critical element for carbon capture from fossil fuel power plants and underground sequestration. Although acceptable levels of water in supercritical CO{sub 2} (up to {approx} 5 x 10{sup -4}g/dm{sup 3}) have been established, their effects on the corrosion resistance of pipeline steels are not fully known. Moreover, the presence of SO{sub 2}, O{sub 2} impurities in addition to the water can make the fluid more corrosive and, therefore, more detrimental to service materials. Also, in this case, limited data are available on materials performance of carbon steels. to advance this knowledge, other service alloys are being investigated in the high pressure high temperature cell containing impure CO{sub 2} fluids using reliable non-destructive in-situ electrochemical methods. The electrochemical results are being augmented by a number of surface analyses of the corroded surfaces.

20 FOSSIL-FUELED POWER PLANTS↗

Fireside Corrosion USC Steering

Oxy-Fuel Fireside Research goals are: (1) Determine the effect of oxy-fuel combustion on fireside corrosion - (a) Flue gas recycle choice, Staged combustion ramifications, (c) JCOAL Collaboration; and (2) Develop methods to use chromia solubility in ash as an 'ash corrosivity' measurement - (a) Synthetic ashes at first, then boiler and burner rig ashes, (b) Applicable to SH/RH conditions.

36 MATERIALS SCIENCE↗

Materials Performance in USC Steam

Materials Performance in USC Steam: (1) pressure effects on steam oxidation - unique capability coming on-line; (2) hydrogen evolution - hydrogen permeability apparatus to determine where hydrogen goes during steam oxidation; and (3) NETL materials development - steam oxidation resource for NETL developed materials.

08 HYDROGEN↗