Uhde-Lacovara, J. | Search NASA

NASA NTRS1990

High accuracy optical rate sensor

Optical rate sensors, in particular CCD arrays, will be used on Space Station Freedom to track stars in order to provide inertial attitude reference. An algorithm to provide attitude rate information by directly manipulating the sensor pixel intensity output is presented. The star image produced by a sensor in the laboratory is modeled. Simulated, moving star images are generated, and the algorithm is applied to this data for a star moving at a constant rate. The algorithm produces accurate derived rate of the above data. A step rate change requires two frames for the output of the algorithm to accurately reflect the new rate. When zero mean Gaussian noise with a standard deviation of 5 is added to the simulated data of a star image moving at a constant rate, the algorithm derives the rate with an error of 1.9 percent at a rate of 1.28 pixels per frame.

Uhde-Lacovara, J.↗

NASA NTRS1987

Analysis of the Continuous Stellar Tracking Attitude Reference (CSTAR) attitude rate processor

The Continuous Stellar Tracking Attitude Reference (CSTAR) system is an in-house project for Space Station to provide high accuracy, drift free attitude and angular rate information for the GN&C system. The outputs of the solid state star trackers are processed to provide attitude information; rate data is then derived from the attitude. Rate derivation is based on discrete time polynomial approximation techniques. This gives simple algorithms which allow for interpolation by other users. Attitude rate is modeled as a constant with low amplitude, low frequency sinusoids superimposed. The rate processor is parameterized to account for the effects of random errors, sample rate, data processing rate and perturbation frequency. The baseline system may be characterized as follows: the three sigma attitude accuracy is 0.01 degrees, the three sigma rate accuracy is 0.0001 degrees per second, the sample rate is 100 Hertz, the sampled signal is bandlimited to 0.5 Hertz, and the data processing rate is 10 Hertz. The above system requires a differentiator of length 127. This will track rate perturbations of frequencies less than 0.01 Hertz with low systematic errors.

Uhde-Lacovara, J.↗