Search NASASearch

Engineering topics

Ulaby, F.

Publications and source records attributed to Ulaby, F..

Report of the heterodyne submillimeter-wave sensors panel

After reviewing the science goals of the Astrotech 21 mission set, and comparing the resulting receiver performance requirements with existing technology, the panel determined that there were significant unmet requirements in four areas: local oscillator power and mixer sensitivity in the Tera-Hz regime, infrared spectrometer channel count, and array technology in any form. A comprehensive development plan has been prepared to provide these capabilities in the time frame needed before technology freeze dates of the respective missions. It was also noted that development of these capabilities has immense payoff for future astrophysics missions, as it opens entire new areas of spectroscopy and imaging in the critical submillimeter wave regime rich in molecular transitions.

Wilson, Robert

Synergism requirements and concepts for SAR and HIRIS on EOS

A study is conducted to ascertain the synergistic advantages obtainable by combining, in the EOS orbital instrument platform, instruments for the optical and microwave measurements of biophysical properties important in ecosystem modeling. Attention is given to the comparative coverages of the SAR, HIRIS, TIMS and MODIS instruments that will be carried by the platform, and to the ongoing development of joint inversion algorithms for the modeling of the ecosystems-related data thus obtained. A three-dimensional characterization of the physical attributes of the vegetation canopy and its background surface will be attempted.

Cimino, J. B.

Computer simulation of a space SAR using a range-sequential processor for soil moisture mapping

The ability of a spaceborne synthetic aperture radar (SAR) to detect soil moisture was evaluated by means of a computer simulation technique. The computer simulation package includes coherent processing of the SAR data using a range-sequential processor, which can be set up through hardware implementations, thereby reducing the amount of telemetry involved. With such a processing approach, it is possible to monitor the earth's surface on a continuous basis, since data storage requirements can be easily met through the use of currently available technology. The Development of the simulation package is described, followed by an examination of the application of the technique to actual environments. The results indicate that in estimating soil moisture content with a four-look processor, the difference between the assumed and estimated values of soil moisture is within + or - 20% of field capacity for 62% of the pixels for agricultural terrain and for 53% of the pixels for hilly terrain. The estimation accuracy for soil moisture may be improved by reducing the effect of fading through non-coherent averaging.

Fujita, M.

A model describing the microwave emission from a multi-layer snowpack at 37 GHz

A multilayer emission model is described and applied to emission measurements obtained at 37 GHz and H polarization using a microwave radiometer attached to a truck-mounted boom in Steamboat Springs, Colorado in 1977. Estimated absorption and scattering coefficients and their dependence on wetness were obtained using calculated values of the dielectric constant at 37 GHz along with the model. It was found that the scattering coefficient is comparable in value to the absorption coefficient for dry snow however, the absorption coefficient increases linearly with increasing snow wetness while the scattering coefficient decreases linearly with increasing wetness. The emission from each layer of the snowpack was also calculated using the estimated coefficients. It is shown that for dry snow, the ground underneath the snowpack contributes about 45% of all measured emission while the rest is due to emission from all the layers within the snowpack. When the wetness of the top 5 cm layer of snowpack increases to about 2% by volume, this top 5 cm snowlayer contributes more than 90% of all the measured emission.

Abdelrazik, M.

Resolution requirements for a soil moisture imaging radar

Image simulation techniques were employed to establish the relationship between spatial resolution and the accuracy of soil moisture estimated by an imaging radar. A spaceborne synthetic aperture radar at an orbital altitude of 600 km, operating at 4.5 GHz with HH polarization configuration and covering a ground swath width of 143 km corresponding to an angle of incidence range extending between 7-22 degrees relative to the vertical, provided the images simulated by a 17.7 km x 19.3 km test site. The role of resolution was evaluated by simulating various sets of images with resolutions ranging from 20 m x 20 m to 1 km x 1 km. Each simulated image was subjected to a soil moisture prediction algorithm whose input is limited to the image intensity level. Results show that the 1 km x 1 km resolution provides the best prediction accuracy for most soil moisture distributions except for drought-like conditions for which the 100 m x 100 m resolution is found to be preferred. In general it was found that the soil moisture of about 90% of the pixels is predicted with an error of + or - 20% of field capacity or less.

Dobson, C.

Optical data processing analysis of stream patterns exhibited on ERTS-1 imagery

The purpose of the investigation described in this paper has been the analysis of large-scale geologic ground patterns in Kansas using ERTS-1 imagery and optical data processing techniques. Optical spatial frequency data provide a repeatable quantitative means of specifying ground pattern characteristics.

Egbert, D.