Search NASA⌕ Search

Engineering topics

Upendra N. Singh

Publications and source records attributed to Upendra N. Singh.

Helium Conservation by Diffusion Limited Purging of Liquid Hydrogen Tanks

Recently, the new 1.2-million-gallon liquid hydrogen (LH 2 ) storage tank at the Kennedy Space Center Launch Complex 39 was purged, replacing nitrogen with helium, using a piston purge process. This purging approach had been used on Space Shuttle External Tanks (ET) in the past, but not on one of the large LH 2 tanks. The result was a huge success, potentially saving more than 1 million cubic feet of helium and significant labor. To better understand this result, a diffusion-based purge model was developed. The model predictions accurately match the helium concentration data, providing understanding of the helium savings and suggesting how to better optimize the purging of this large tank for future operations. The model was then applied to the piston purging of the Space Shuttle ETs, showing that these purges were not optimal, but that the amount of wasted helium was not excessive and that additional helium might have been saved by small changes to the process. The Space Shuttle Program (SSP) has ended, but these results are applicable to the purging of future large cylindrical LH 2 tanks. Finally, data have been obtained on inerting the Space Launch System (SLS) Core Stage (CS) LH 2 tank, replacing hydrogen with helium after an aborted launch. This is a more complicated case, but the model predicts that substantial helium might be saved by modifying the current purging process.

Helium Conservation↗

NASA's New Laser Risk Reduction Program For Future Space Lidar Missions

NASA has been performing ground, airborne, and space-based scientific measurements since it was formed in 1958. Initial ground and airborne measurements were made with in situ instruments. By necessity, initial earth observation space-based missions were accomplished with passive remote sensing. Active microwave radar was added to the sensor repertoire in the late 1970s. A few key measurements important to NASA remain unaccomplished, however, despite the passive and radar successes. These critical measurements include space-based altimetry; and high spatial resolution profiling of aerosol properties, wind velocity, clouds, and molecular concentrations. Fortunately, a new technology, active optical radar or laser radar or lidar, has matured to the point that the last decade has seen a growing consideration of lidar for space missions. Part of the surge in consideration of lidar has been the tremendous progress in solid-state lasers fueled by advances in crystal growth quality and pump laser diode technology.

Michael J. Kavaya↗

Nineteenth International Laser Radar Conference

This publication contains extended abstracts of papers presented at the Nineteenth International Laser Radar Conference, held at Annapolis, Maryland, July 6-10, 1998; 260 papers were presented in both oral and poster sessions. The topics of the conference sessions were Aerosol Clouds, Multiple Scattering; Tropospheric Profiling; Stratospheric/Mesospheric Profiling; Wind Profiling; New Lidar Technology and Techniques; Lidar Applications, including Altimetry and Marine; Space and Future Lidar; and Lidar Commercialization/Eye Safety. This conference reflects the breadth of research activities being conducted in the lidar field. These abstracts address subjects from lidar-based atmospheric investigations, development of new lasers and lidar system technology, and current and future space-based lidar systems.

Upendra N. Singh↗

Nineteenth International Laser Radar Conference

This publication contains extended abstracts of papers presented at the Nineteenth International Laser Radar Conference, held at Annapolis, Maryland, July 6-10, 1998; 260 papers were presented in both oral and poster sessions. The topics of the conference sessions were Aerosol Clouds, Multiple Scattering; Tropospheric Profiling, Stratospheric/Mesospheric Profiling; Wind Profiling; New Lidar Technology and Techniques; Lidar Applications, Including Altimetry and Marine; Space and Future Lidar; and Lidar Commercialization/Eye Safety. This conference reflects the breadth of research activities being conducted in the lidar field. These abstracts address subjects from lidar-based atmospheric investigations, development of new lasers and lidar system technology, and current and future space-based lidar systems.

Upendra N. Singh↗

A New Raman DIAL Technique for Measuring Stratospheric Ozone in the Presence of Volcanic Aerosols

This paper describes a new lidar scheme to measure stratospheric ozone in the presence of heavy volcanic aerosol loading. The eruptions of the Philippine volcano Pinatubo during June 1991 ejected large amounts of sulfur dioxide into the atmosphere to altitudes of at least 30 km. The resulting aerosols have severely affected the measurements of stratospheric ozone when using traditional Rayleigh differential absorption lidar (DIAL) technique, in which the scattering mechanism is almost entirely Rayleigh and which assumes a small amount or no aerosols. In order to extract an ozone profile in the regions below about 30 km where the Rayleigh lidar returns are contaminated by aerosol scattering from Mt. Pinatubo cloud, we have used a Raman lidar technique, where the scattering mechanism depends solely on molecular nitrogen. In this scheme there is no aerosol scattering component to the backscattered lidar return. Using this technique in conjunction with the Rayleigh DIAL measurement, the GSFC stratospheric ozone lidar has measured ozone profiles between 15 and 50 km during the recently held UARS correlative measurement campaign (February-March 1992) at JPL's Table Mountain Facility in California.

Upendra N. Singh↗

TPSAS-NF1676L-23583-DND

Overview of NASA Earth Science Missions, including active optical remote sensing techniques for global observations.

Upendra N. Singh↗

Independent Reliability Assessment of the NASA GSFC Laser Transmitter for the LISA Program

The Laser Interferometer Space Antenna (LISA) is a partnership between the European Space Agency (ESA) and NASA to build a Gravitational Wave (GW) observatory. The observatory, which consists of a three-spacecraft constellation with a nominal separation of 2.5 million km between each spacecraft, provides a tool for scientists to directly detect gravitational waves generated from various astronomical phenomena in a waveband that is not accessible from Earth. NASA is developing laser transmitters as one of the potential US contributions to LISA. The NASA laser design leverages lessons learned from previous flight missions and included the latest technologies in photonics packaging and reliability engineering to ensure a laser lifetime of >16 years covering integration and test through a possible extended mission phase. As part of the laser development process, NASA’s Goddard Space Flight Center (GSFC) requested support from the NASA Engineering and Safety Center (NESC) to independently assess the Technology Readiness Level (TRL) of the LISA Laser System (LS). The independent assessment included the following tasks: (a) assess the design for weaknesses and suggest improvements to mitigate risks, (b) assess the laser reliability plan for weaknesses and suggest improvements to mitigate risks and improve effectiveness, and (c) assess the current redundancy plan on laser subsystems for weaknesses and suggest improvements to mitigate risks and improve effectiveness. The NESC team comprised of a team of subject matter experts (SMEs) and performed a 12-month review of every aspect of the laser design. We present the assessment findings and the current development progress of the LISA laser to meet the mission requirements with a delivery of a form, fit, and functional TRL6 laser to the LSIA mission by late 2023.

LISA↗

Independent Technical Assessment of NASA and External Quantum Sensing Capability

- The Subject Matter Experts in the Sensors & Instrumentation Quantum Sensing Community of Practice (CoP) requested an independent technical assessment of the agency's capabilities in QS to understand NASA's internal needs and competencies related to QS and compare agency capabilities with those available externally including industry, academia, and other government agencies. - The outcomes of the assessment will help the agency in establishing appropriate strategies and investments to develop and maintain the state-of-the-art sensing competence and capabilities required to meet the agency’s future needs. - NASA Engineering and Safety Center Review Board approved the assessment request and assigned NASA Technical Fellow to lead and conduct the assessment by engaging NASA Centers, NASA HQ and an independent, non-commercial, and highly credible Quantum Sensing Experts from Academia, Department of Defense, other Government Agencies. The assessment duration is for one year, starting October 2021 and ending December 2022.

Independent Technical Assessment↗

Independent Reliability Assessment of the Laser Transmitter for the ESA-NASA Laser Interferometer Space Antenna (LISA) Program

As part of the laser development process, NASA’s Goddard Space Flight Center (GSFC) requested support from the NASA Engineering and Safety Center (NESC) to independently assess the Technology Readiness Level (TRL) of the LISA Laser System (LS). The independent assessment included the following tasks: (a) assess the design for weaknesses and suggest improvements to mitigate risks, (b) assess the laser reliability plan for weaknesses and suggest improvements to mitigate risks and improve effectiveness, and (c) assess the current redundancy plan on laser subsystems for weaknesses and suggest improvements to mitigate risks and improve effectiveness. The presentation will focus on the assessment findings and the current development progress of the LISA laser to meet the mission requirements with a delivery of a form, fit, and functional TRL6 laser to the LISA mission by late 2023.

Laser Interferometry↗

Carbon Dioxide Active Remote Sensing Using Pulsed 2-µm Lidar

A pulsed 2-µm Integrate Path Differential Absorption (IPDA) lidar was developed at NASA Langley Research Center for high-accuracy and high-precision measurements of atmospheric carbon dioxide (CO 2 ). The instrument targets the R30 CO 2 absorption line and implements high-energy tunable on-line transmitter and advanced HgCdTe avalanche photodiode receiver. During 2019 airborne validation campaign, the IPDA was tested over the ocean for retrieving the weighted-average column dry-air volume mixing ratio of CO 2 (XCO 2 ) from 4.5 km altitude. XCO 2 measurement resulted in 404.43 ± 1.23 ppm using 10 s average, as compared to 405.49 ppm from prediction models. This translates to 0.26% and 0.30% relative accuracy and precision, respectively. Performance models were updated to scale the IPDA technology assuming operation from space platform. Results present XCO 2 measurements using the instrument capabilities considering different target scenarios for Earth’s surface. This demonstrates the potential for the IPDA technique and technology to achieve sustained global CO 2 measurement.

Active Remote Sensing↗

Independent Technical Assessment of NASA and External Quantum Sensing Capability

The recent FY 2020 federal Research and Development Budget Priorities memo addresses the leadership need in Quantum Information Science (QIS) directing agencies to “prioritize QIS research and development (R&D), which will build the technical and scientific base necessary to explore the next generation of QIS theory, devices, and applications.” Quantum Sensing (QS) is an integral part of QIS. NASA is a key part of the directive to forward American space exploration and commercialization by providing “capabilities that have broad potential applications in space and on Earth.” QS provides an arena for NASA to demonstrate leadership in both areas of the administrative directive. QS uses quantum properties to achieve unprecedented measurement sensitivity and performance, including quantum-enhanced methodologies that outperform their classical counterparts. Typical quantum sensors exploit techniques such as atomic systems, matter waves, quantum entanglement, quantum superposition of states, quantum illumination methods, and manipulation of photons and atoms, in general. Guided by advancements in our ability to generate, manipulate, and control quantum systems, the emerging quantum sensing technologies promise unrivalled sensitivity, resolution, and precision, potentially leading to game-changing applications. Significant gains include technologies important for a range of NASA missions such as remote sensing, in situ measurements, metrology, interferometry, quantum communication, ranging, imaging, radar and lidar receivers, and gravity measurements. NASA Engineering and Safety Center has convened an independent external panel, comprising of Quantum Sensing Experts from Government, DoD, academia, and Federally funded Research and Development Center to conduct an independent technical assessment of the agency's capabilities in Quantum Sensing to understand NASA's internal needs and competencies related to Quantum Sensing and compare agency capabilities with those available externally including industry, academia, and other government agencies. The outcomes of the assessment will help the agency in establishing appropriate strategies and investments to develop and maintain the state-of-the-art sensing competence and capabilities required to meet the agency’s future needs. The External Experts Panel (EEP) is collaborating with HQ, various NASA Center and the representatives in the NASA Quantum Sensing Community of Practice (QS CoP), a part of NASA Sensors and Instrumentation Technical Fellow Technical Discipline Team, in obtaining common, current understanding of agency mission needs where QS can be an important enabler for future needs, and any programs, projects, assets, and technologists working in QS. The EEP organized a Quantum Sensing Workshop of practitioners from industry, academia, other government agencies, external experts, and interested NASA personnel to gather the assessment information. EEP also conducted information gathering on the industry at large, educational institutions, and other government agency research efforts for capture in the assessment database. At the conclusion of this assessment, EEP team will develop findings and conclusions describing NASA’s capabilities for the mission needs, NASA's relative position on new, enabling technologies, and an analysis of the gaps that may present any risks to near-term or far-term mission needs. This presentation will give details of the NASA and External Quantum Sensing Assessment outcomes, findings, observations, and its recommendation to NASA as how it can advance Quantum Sensing technologies and techniques for its science and explorations related missions.

External Quantum Sensing Capability↗

Profiling of Mars Atmospheric Carbon Dioxide Isotopologues Using 2-Micron Orbiting Lidar

Mars atmospheric characterization is important for investigating the planet climate history and planning future missions. A feasibility study for implementing the 2-um lidar technology for measuring Martian atmospheric carbon dioxide isotopologues is presented in this paper. Instrument reconfigurations include transmitted wavelengths and detection for differential absorption lidar application using an orbiter platform. Spectral analysis focused on the major four carbon dioxide isotopologues using the 2035 nm wavelength range, which results in minimal interference from other molecular species. Lidar simulation indicated the capability of detecting 12C16O2, 13C16O2, and 18O12C16O near surface vertical profiles up to 20 km altitude. Sensing of 17O12C16O isotopologue is challenging due to lower abundance and Martian atmospheric dust. This orbiting lidar provides a valuable tool for future Mars missions.

Tamer F. Refaat↗

NASA and External Quantum Sensing Capability Assessment for NASA Space-Based Science Measurements

The Subject Matter Experts in the Sensors & Instrumentation Quantum Sensing Community of Practice (CoP) requested an independent technical assessment of the agency's capabilities in QS to understand NASA's internal needs and competencies related to QS and compare agency capabilities with those available externally including industry, academia, and other government agencies. The outcomes of the assessment will help the agency in establishing appropriate strategies and investments to develop and maintain the state-of-the-art sensing competence and capabilities required to meet the agency’s future needs. NASA Engineering and Safety Center Review Board approved the assessment request and assigned NASA Technical Fellow to lead and conduct the assessment by engaging NASA Centers, NASA HQ and an independent, non-commercial, and highly credible Quantum Sensing Experts from Academia, Department of Defense, other Government Agencies. The assessment started in October 2021 and final report was completed in October 2023.

External Quantum Sensing↗

Profiling of Mars Atmospheric Carbon Dioxide Isotopologues Using 2-Micron Orbiting Lidar

Mars atmospheric characterization is important for investigating the planet climate history and planning future missions. A feasibility study for implementing the 2-um lidar technology for measuring Martian atmospheric carbon dioxide isotopologues is presented in this paper. Instrument reconfigurations include transmitted wavelengths and detection for differential absorption lidar application using an orbiter platform. Spectral analysis focused on the major four carbon dioxide isotopologues using the 2035 nm wavelength range, which results in minimal interference from other molecular species. Lidar simulation indicated the capability of detecting 12C16O2, 13C16O2, and 18O12C16O near surface vertical profiles up to 20 km altitude. Sensing of 17O12C16O isotopologue is challenging due to lower abundance and Martian atmospheric dust. This orbiting lidar provides a valuable tool for future Mars missions.

Tamer F. Refaat↗