Search NASA⌕ Search

Engineering topics

Urban, Jeffrey J.

Publications and source records attributed to Urban, Jeffrey J..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanism and Kinetics of Ethanol–Acetaldehyde Conversion to 1,3-Butadiene over Isolated Lewis Acid La Sites in Silanol Nests in Dealuminated Beta Zeolite

Biomass-derived ethanol (EtOH) and acetaldehyde (AcH) conversion to 1,3-butadiene (1,3-BD) is an alternative process for 1,3-BD production. The present investigation reports the preparation and characterization of isolated La sites introduced into the silanol nests in DeAlBEA as well as detailed studies of the mechanism and kinetics for the conversion of an EtOH-AcH mixture to 1,3-BD. La sites supported on DeAlBEA are found to be present as (≡SiO) 2 La-OH groups that are H-bonded with adjacent Si-OH groups, possessing high C-C coupling activity and stability, superior to state-of-the-art Y-DeAlBEA. La sites supported on silica (La-SiO 2 ) with a similar chemical structure but no H-bonding interaction with Si-OH groups were prepared for comparison. Lewis acid La sites promote AcH aldol condensation, and the activity of such sites is nearly identical for both La-DeAlBEA and La-SiO 2 . Further, the rate of C 4 product formation increases by a factor of 4.8 upon addition of EtOH to the feed of AcH over La-DeAlBEA, whereas that over La/SiO 2 remains unchanged. Investigation of the mechanism and kinetics of AcH aldol condensation and EtOH-AcH conversion to 1,3-BD revealed two C-C bond forming pathways-AcH aldol condensation by Lewis acid La sites and direct coupling of EtOH-AcH over H-bonded (≡SiO) 2 La-OH···HO-Si≡ sites. This study provides important information about the role of the local environment of isolated Lewis acid sites and their effects on the direct coupling of EtOH and AcH to form 1,3-BD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A general flame aerosol route to high-entropy nanoceramics

High-entropy ceramics are an emerging class of materials with fascinating characteristics. However, elemental immiscibility and crystal complexity limit the development of a general synthesis strategy, and common methods yield bulk materials. Here, we introduce a transformative non-equilibrium flame aerosol technique for synthesizing high-entropy nanoceramics. This scalable, one-step process enables the production of high-entropy oxide nanoceramics with an unprecedented diversity of crystal structures, including fluorite-phase materials that integrate up to 22 distinct cation elements. The method’s capacity for entropic stabilization and grain refinement significantly improves the thermal stability of these nanostructures. In a representative application, a Pt-(MgCoNiCuZn)O high-entropy single-atom catalyst showed superior activity and long-term stability, maintaining constant CO 2 conversion over 670 h and dramatically outperforming conventional catalysts. Finally, the general approach opens a vast composition and structure space for the creation of high-entropy oxide nanomaterials for application across diverse fields, including catalysis, energy storage, sensing, and thermal management.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanochemical in Situ Encapsulation of Palladium in Covalent Organic Frameworks

Palladium-encapsulated covalent organic frameworks (Pd/COFs) have garnered enormous attention in heterogeneous catalysis. However, the dominant ex situ encapsulation synthesis is tedious (multistep), time-consuming (typically 4 days or more), and involves the use of noxious solvents. Here we develop a mechanochemical in situ encapsulation strategy that enables the one-step, time-efficient, and environmentally benign synthesis of Pd/COFs. By ball milling COF precursors along with palladium acetate (Pd(OAc) 2 ) in one pot under air at room temperature, Pd/COF hybrids were readily synthesized within an hour, exhibiting high crystallinity, uniform Pd dispersion, and superb scalability up to gram scale. Moreover, this versatile strategy can be extended to the synthesis of three Pd/COFs. Remarkably, the resulting Pd/DMTP-TPB showcases extraordinary activity (96-99% yield in 1 h at room temperature) and broad substrate scope (>10 functionalized biaryls) for the Suzuki-Miyaura coupling reaction of aryl bromides and arylboronic acids. Furthermore, the heterogeneity of Pd/DMTP-TPB is verified by recycling and leaching tests. Finally, the mechanochemical in situ encapsulation strategy disclosed herein paves a facile, rapid, scalable, and environmentally benign avenue to access metal/COF catalysts for efficient heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nano-enhanced solid-state hydrogen storage: Balancing discovery and pragmatism for future energy solutions

Nanomaterials have revolutionized the battery industry by enhancing energy storage capacities and charging speeds, and their application in hydrogen (H 2 ) storage likewise holds strong potential, though with distinct challenges and mechanisms. H 2 is a crucial future zero-carbon energy vector given its high gravimetric energy density, which far exceeds that of liquid hydrocarbons. However, its low volumetric energy density in gaseous form currently requires storage under high pressure or at low temperature. This review critically examines the current and prospective landscapes of solid-state H 2 storage technologies, with a focus on pragmatic integration of advanced materials such as metal-organic frameworks (MOFs), magnesium-based hybrids, and novel sorbents into future energy networks. These materials, enhanced by nanotechnology, could significantly improve the efficiency and capacity of H 2 storage systems by optimizing H 2 adsorption at the nanoscale and improving the kinetics of H 2 uptake and release. We discuss various H 2 storage mechanisms—physisorption, chemisorption, and the Kubas interaction—analyzing their impact on the energy efficiency and scalability of storage solutions. The review also addresses the potential of “smart MOFs”, single-atom catalyst-doped metal hydrides, MXenes and entropy-driven alloys to enhance the performance and broaden the application range of H 2 storage systems, stressing the need for innovative materials and system integration to satisfy future energy demands. High-throughput screening, combined with machine learning algorithms, is noted as a promising approach to identify patterns and predict the behavior of novel materials under various conditions, significantly reducing the time and cost associated with experimental trials. In closing, we discuss the increasing involvement of various companies in solid-state H 2 storage, particularly in prototype vehicles, from a techno-economic perspective. In conclusion, this forward-looking perspective underscores the necessity for ongoing material innovation and system optimization to meet the stringent energy demands and ambitious sustainability targets increasingly in demand.

25 ENERGY STORAGE↗
DOE OSTI2024

Nitrogen-Doped Graphene-Like Carbon Intercalated MXene Heterostructure Electrodes for Enhanced Sodium- and Lithium-Ion Storage

MXene is investigated as an electrode material for different energy storage systems due to layered structures and metal-like electrical conductivity. Experimental results show MXenes possess excellent cycling performance as anode materials, especially at large current densities. However, the reversible capacity is relatively low, which is a significant barrier to meeting the demands of industrial applications. This work synthesizes N-doped graphene-like carbon (NGC) intercalated Ti 3 C 2 T x (NGC-Ti 3 C 2 T x ) van der Waals heterostructure by an in situ method. The as-prepared NGC-Ti 3 C 2 T x van der Waals heterostructure is employed as sodium-ion and lithium-ion battery electrodes. For sodium-ion batteries, a reversible specific capacity of 305 mAh g -1 is achieved at a specific current of 20 mA g -1 , 2.3 times higher than that of Ti 3 C 2 T x . For lithium-ion batteries, a reversible capacity of 400 mAh g -1 at a specific current of 20 mA g -1 is 1.5 times higher than that of Ti 3 C 2 T x . Both sodium-ion and lithium-ion batteries made from NGC-Ti 3 C 2 T x shows high cycling stability. The theoretical calculations also verify the remarkable improvement in battery capacity within the NGC-Ti 3 C 2 O 2 system, attributed to the additional adsorption of working ions at the edge states of NGC. This work offers an innovative way to synthesize a new van der Waals heterostructure and provides a new route to improve the electrochemical performance significantly.

25 ENERGY STORAGE↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au–Vo–Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $\text{g}^{-1}_{\text{Au}} \text{h}^{–1}$) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Finally, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au-Vo-Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $g^{-1}_{Au}$ h -1 ) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. In conclusion, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fast Room-Temperature Mg-Ion Conduction in Clay-Like Halide Glassy Electrolytes

The discovery of mechanically soft solid-state materials with fast Mg-ion conduction is crucial for the development of solid-state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm -1 at room temperature. These Mg-ion conductors obtained by ball milling Mg and Ga salts exhibit clay-like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft-clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine-rich environment, yielding fast Mg-ion conduction. This work demonstrates the potential of clay-like halide electrolytes for all-solid-state magnesium batteries, with possible further extension to other multivalent battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advances in in situ/operando techniques for catalysis research: enhancing insights and discoveries

Abstract Catalysis research has witnessed remarkable progress with the advent of in situ and operando techniques. These methods enable the study of catalysts under actual operating conditions, providing unprecedented insights into catalytic mechanisms and dynamic catalyst behavior. This review discusses key in situ techniques and their applications in catalysis research. Advances in in situ electron microscopy allow direct visualization of catalysts at the atomic scale under reaction conditions. In situ spectroscopy techniques like X-ray absorption spectroscopy and nuclear magnetic resonance spectroscopy can track chemical states and reveal transient intermediates. Synchrotron-based techniques offer enhanced capabilities for in situ studies. The integration of in situ methods with machine learning and computational modeling provides a powerful approach to accelerate catalyst optimization. However, challenges remain regarding radiation damage, instrumentation limitations, and data interpretation. Overall, continued development of multi-modal in situ techniques is pivotal for addressing emerging challenges and opportunities in catalysis research and technology.

Chen, Linfeng↗
DOE OSTI2024

Inkjet-printed SnO x as an effective electron transport layer for planar perovskite solar cells and the effect of Cu doping

Inkjet printing is a more sustainable and scalable fabrication method than spin coating for producing perovskite solar cells (PSCs). Although spin-coated SnO 2 has been intensively studied as an effective electron transport layer (ETL) for PSCs, inkjet-printed SnO 2 ETLs have not been widely reported. Here, we fabricated inkjet-printed, solution-processed SnO x ETLs for planar PSCs. A champion efficiency of 17.55% was achieved for the cell using a low-temperature processed SnO x ETL. The low-temperature SnO x exhibited an amorphous structure and outperformed high-temperature crystalline SnO 2 . The improved performance was attributed to enhanced charge extraction and transport and suppressed charge recombination at ETL/perovskite interfaces, which originated from enhanced electrical and optical properties of SnO x , improved perovskite film quality, and well-matched energy level alignment between the SnO x ETL and the perovskite layer. Furthermore, SnO x was doped with Cu. Cu doping increased surface oxygen defects and upshifted energy levels of SnO x , leading to reduced device performance. A tunable hysteresis was observed for PSCs with Cu-doped SnO x ETLs, decreasing at first and turning into inverted hysteresis afterwards with increasing Cu doping level. This tunable hysteresis was related to the interplay between charge/ion accumulation and recombination at ETL/perovskite interfaces in the case of electron extraction barriers.

14 SOLAR ENERGY↗
DOE OSTI2024

High-Performance Lithium-Ion Batteries with High Stability Derived from Titanium-Oxide- and Sulfur-Loaded Carbon Spherogels

This study presents a novel approach to developing high-performance lithium-ion battery electrodes by loading titania-carbon hybrid spherogels with sulfur. The resulting hybrid materials combine high charge storage capacity, electrical conductivity, and core-shell morphology, enabling the development of next-generation battery electrodes. We obtained homogeneous carbon spheres caging crystalline titania particles and sulfur using a template-assisted sol-gel route and carefully treated the titania-loaded carbon spherogels with hydrogen sulfide. The carbon shells maintain their microporous hollow sphere morphology, allowing for efficient sulfur deposition while protecting the titania crystals. By adjusting the sulfur impregnation of the carbon sphere and varying the titania loading, we achieved excellent lithium storage properties by successfully cycling encapsulated sulfur in the sphere while benefiting from the lithiation of titania particles. Without adding a conductive component, the optimized material provided after 150 cycles at a specific current of 250 mA g -1 a specific capacity of 825 mAh g -1 with a Coulombic efficiency of 98%.

25 ENERGY STORAGE↗
DOE OSTI2023

Systems and methods for water desalination using thermo-responsive ionic liquids regenerated by solar energy

This disclosure provides systems, methods, and apparatus related to water desalination. In one aspect, a method includes generating a diluted draw solution using forward osmosis. Wastewater is on a first side of an osmotic membrane and a draw solution is on a second side of the osmotic membrane. The draw solution comprises a mixture of water and an ionic liquid. Water in the wastewater diffuses across the osmotic membrane to the draw solution to form the diluted draw solution. The diluted draw solution is heated using a photonic heater to a temperature above a lower critical solution temperature (LCST) of the ionic liquid to phase separate the diluted draw solution into the ionic liquid and treated water.

Kostecki, Robert↗