Search NASA⌕ Search

Engineering topics

Usov, Igor Olegovich

Publications and source records attributed to Usov, Igor Olegovich.

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

An automatic multi-precursor flow-type atomic layer deposition system

Designs for two automated atomic layer deposition (ALD) flow reactors are presented, and their capabilities for coating additively manufactured (AM) metal prints are described. One instrument allows the coating of several AM parts in batches, while the other is useful for single part experiments. To demonstrate reactor capabilities, alumina (Al 2 O 3 ) was deposited onto AM 316L stainless steel by dosing with water (H 2 O) vapor and trimethylaluminum (TMA) and purging with nitrogen gas (N 2 ). Both instruments are controlled by custom-programmed LabVIEW software that enables in situ logging of temperature, total pressure, and film thickness using a quartz crystal microbalance. An initial result shows that 150 ALD cycles led to a film thickness of ~55 nm, which was verified with Rutherford backscattering spectroscopy. This indicates that the reactors were indeed depositing single atomic layers of Al 2 O 3 per ALD cycle, as intended.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

FY2024 Q4 L2 Milestone 8237 for Opacity-on-NIF

This document addresses parts 2 and 3 of the original milestone request. In the following writeup, the development of OpSpecTR at LLNL by LLNL and NNSS personnel will be detailed first, followed by a write-up of the development of Vme-resolved simulaVons of the opacity-on-NIF experiment. Capsule backlight simulaVons, hohlraum simulaVons, and sample simulaVons from CASSIO are combined to produce the line of sight from the capsule to an effecVve OpSpec posiVon. Spectra are generated by post-processing these simulaVons from either Spect3D, a commercial software by Prism ComputaVonal Sciences, or FESTR (Finite Element Spectroscopic Transport of RadiaVon), a LANL code. While the simulaVons do not at this stage proceed late enough to include the worst of the backgrounds generated from the hohlraum experimentally and each post-processing simulaVon includes only one ray for each spectrometer channel, these efforts represent proof of concept for a new capability to complete Vme-resolved and Vmegated simulaVons for the complete line of sight of the complex opacity-on-NIF geometry. Future work will be discussed at the end of the report for both efforts.

42 ENGINEERING↗
DOE OSTI2024

XFOL FY25 Omega 3 pager [Slides]

The XFOL campaign is continuing to study radiation flow in stochastic media. Purpose: Simultaneously measure the ionization state of the background and inclusions of a binary stochastic media using the COAX/OUTI diagnostic. Motivation: Radflow is stochastic media is of wide, growing interest and COAX is a new powerful diagnostic that can characterize the radflow physics and validate codes, models, and their underlying assumptions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Two bright, optically clear, intrinsic fast-neutron and charged-particle detector materials for neutron imaging and other applications

Two optically clear, bright, scintillating ZnS materials have been identified that, like previous opaque ZnS scintillators, are excellent charged particle detectors. We show that ZnS is a good fast-neutron-to charged-particle converter making optically clear ZnS an intrinsic fast-neutron detector that does not require layering or mixing of converter materials and scintillator materials, and removes the limitations imposed by opaque ZnS scintillator materials used for more than a century. Thermal neutron detection using optically clear 6 LiF or 10 BN and clear ZnS may benefit from improved spatial resolution and light transmission. Properties and tests of clear scintillating ZnS are described. Fast-neutron imaging applications benefit from increased efficiency of these scintillators, minimal scattering in the scintillator, and increased useful detector volume. Charged particle and fast-neutron detectors have numerous applications in nuclear non-proliferation and security, nuclear and particle physics, and non-destructive testing and environmental measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Adhesion of Titanium Coatings on Additively Manufactured Stainless Steel [Slides]

Additive manufacturing can improve fuel cell development by increasing design development speed, enabling complex designs through more flexible fabrication, and reducing wasted excess material. The goal of the project is to develop a process for strongly adhering a coating of titanium to additively manufactured stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Adhesion of Titanium Coatings on Additively Manufactured Stainless Steel

The ongoing global climate change crisis has brought attention to the urgent need to reduce greenhouse gas emissions from vehicles by providing alternative zero-emission fueling technologies. Prevailing vehicles are dependent on fossil fuels and contribute to climate change by creating emissions of carbon dioxide. In 2019, transportation was the largest contributing economic sector to the U.S. greenhouse gas emissions total at 29% [1]. By converting vehicle fueling to an alternative method, major reductions in greenhouse gas emissions can be achieved. Hydrogen fuel cells are one potential alternative capable of generating electricity from hydrogen while emitting only water. Several obstacles hinder the development of hydrogen fuel cells as a viable alternative, including the manufacturability of bipolar plates.

08 HYDROGEN↗
DOE OSTI2021

Air-buoyant structures and vehicles

Air-buoyant structures, and vehicles incorporating air-buoyant structures, are provided. Hollow, air-buoyant structures may include a shell of ultra-low density aerogel material, foam material, or vapor-expanded material that is strong and stiff enough to withstand atmospheric pressure and lightweight enough to achieve buoyancy in air under evacuation. The shell may be reinforced with a suitable reinforcing material, such as helical nanofibers. The air-buoyant structures may also include vacuum pumps and valves operably connected to or integrated with the hollow shell. The vacuum pumps and valves may be configured to pump air out of the hollow shell and allow air back into the hollow shell to control buoyancy.

Beaux, II, Miles Frank↗
DOE OSTI2020

Plutonium Dedicated Surface Probe Microscopy Capability

An atomic force microscope (AFM) equipped with gas dosing capabilities and a scanning tunneling microscope (STM) housed within a vacuum chamber with Pu sputtering capabilities and the potential for rapid heating via electron bombardment have been devised for investigations of Pu surface aging (such as oxidation, corrosion, and self-irradiation damage), reactivity, and rapid heating. These instruments are capable of probing Pu surface areas ranging from a fractions of nm2 (STM) to hundreds of μm2 (AFM) to obtain three dimensional imaging of surface microstructure and morphology, as well as mapping of the local electronic structure (i.e., the occupied and unoccupied electronic states), surface chemical, and mechanical properties. A detailed description of our surface probe microscopy (SPM) capability, specifically designed for handling of Pu coupons is given in the references. In FY20, four tasks have been undertaken: Resumed maintenance of Pu AFM and modification of STM capabilities including calibration, annual measurement of Pu surface, and implementation of additional instrumentation for rapid heating effort; Analyzed AFM FY19 gas dosing experiment data of 7 at% gallium-stabilized δ-phase Pu (δ-Pu) coupon; Determined the direction of future gas dosing experiments to investigate reversibility of surface features; and, Published a paper titled "Effects of ion sputtering on plutonium surfaces" in the Journal of Nuclear Materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Reflector coatings development (FY2020 End of Year Report)

X-ray detection instrumentation has been developed and manufactured at LANL for various DOE programs. One way to improve light collection efficiency, for a scintillator type detector, is to apply suitable reflectors. The coating capability and fabrication procedure for Al reflective coatings was established in FY19 at MST-7. Al reflective coatings with good stability, good adhesion to LSO, and reflectivity (R) up to 78% were fabricated. Materials with higher diffuse reflectivity (such as Teflon tape R=99%) are desirable. A literature search revealed a number of materials in the form of paint or free standing tape with diffuse R = 98- 99%. However, for the intended application such reflectors have to be applied in the form of a coating with strong adhesion to LSO crystals. The purpose of the FY20 project was to develop thin film coating techniques for PTFE (known as Teflon) reflectors and fabricate reflective coatings on provided LSO crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Pyrolytic Carbon Coating Effects on Oxide and Carbide Kernels Intended for Nuclear Fuel Applications

The coating of nuclear fuel kernels with pyrolytic carbon (PyC) is a well-understood practice dating back over half a century. In spite of decades of studies related to these coatings, no study has yet investigated the effect of the PyC deposition coating process on the kernels themselves. In this study, the composition and crystallographic phase of kernel materials were observed to change after exposure to the thermal and chemical environment of PyC coating process. Specifically, the coating process increased the fraction of high carbon content phase within carbide microsphere kernels, with W 2 C containing microspheres driven towards WC, and UC containing microspheres driven towards UC 2 . Oxide microspheres consisted of a mixture of two crystalline phases. The monoclinic phase within yttria-stabilized zirconia microspheres was eliminated by the coating process resulting in a purely tetragonal phase. Hafnium oxide microspheres were more stable showing no detectable change in composition or crystal structure after coating.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Bad Foils in Simulated Opacity Experiments

This presentation covers the following topics: Opacity in HED Astrophysics; HED Opacity Experiments; Bad Foils in Opacity Experiments; Bad Foils in Simulated Opacity Experiments

47 OTHER INSTRUMENTATION↗