Search NASA⌕ Search

Engineering topics

Vacik, J

Publications and source records attributed to Vacik, J.

Fabrication Of Buried Self-Organized Stripes In The Ni/C{sub 60} Composite

A periodic array of striped nanoscopic domains, embedded in the epitaxially grown Ni layer, was formed after thermal annealing of the Ni/Ni+C{sub 60}/C{sub 60}/Ni thin multilayer sequence deposited on the MgO(001) monocrystal. The composite was annealed in 100 deg. C/1 hr increments in the range of 200-600 deg. C, and the structural evolution of the composite was analyzed mainly by Rutherford Backscattering and Scanning Electron Microscopy. The periodic system of the stripes was revealed after annealing at 600 deg. C. The possible mechanism of the domain formation is suggested as follows: temperatures below 500 deg. C incite diffusion (and consecutive disintegration) of the C{sub 60} molecules; temperatures above 500 deg. C induce forceful intermixing of the upper Ni/Ni+C{sub 60}/C{sub 60} layers; due to the pronounced immiscibility of the Ni and C (C{sub 60}) components the process of the phase separation is triggered. In the confined crystalline matrix of the buffer Ni layer the separation proceeds coordinately according to the Ni lattice template - the stripe domains are formed in a direction parallel to the main crystallographic orientation (001) of the Ni epilayer.

36 MATERIALS SCIENCE↗

Hybridization and Modification of the Ni/C{sub 60} Composites

Hybridization and thermal evolution of the Ni+C{sub 60} composites, deposited on Si(001) at room temperature, were studied using Scanning Electron Microscopy, {mu}-Raman spectroscopy and Rutherford Backscattering. As-deposited, the hybrid films exhibited a granular nano-structure with Ni nano-particles encapsulated in C{sub 60} polymerized rinds. The Ni and C (C{sub 60}) distributions in a top layer were found homogeneous with a stable Ni/C (C{sub 60}) ratio; in the larger depth the distributions were inhomogeneous and their ratio dramatically varied. At elevated temperatures, all structural parameters were changed. In the subsurface layer Ni- and C (C{sub 60})-rich zones were formed (due to the induced phase separation), C{sub 60}-molecules decayed and their fragments were transformed into amorphous carbon (a-C). The free volume distribution of the stressed hybrid matter was analyzed by the Hg marker that (in a form of vapors) in-diffused in to the samples. The RBS analysis showed that the Hg distribution of the as-deposited films followed the character of distribution of the C (C{sub 60}) component. At elevated temperatures, however, the Hg profiles decreased dramatically (especially in the subsurface layer) suggesting a significant drop-off of the free volume concentration due to the formation of the spatially compact a-C clusters.

36 MATERIALS SCIENCE↗

On Boron Diffusion in MgF{sub 2}

The MgF{sub 2} monocrystals were irradiated at room temperature with 390 keV B{sup +} ions up to the fluence of 10{sup 16} cm{sup -2}. The irradiated samples were (isochronally and isothermally) annealed in high vacuum at the temperatures 200 deg. C, 300 deg. C, 400 deg. C, 500 deg. C, 600 deg. C and 700 deg. C for the times ranging from 2-100 hours. After each annealing step, the boron depth distribution was determined using the neutron depth profiling technique. As implanted, the depth distributions of boron exhibited standard Gaussian-like forms, but the evaluated profile parameters, R{sub P} = 960 nm and {delta}R{sub P} = 140 nm, were higher than those calculated using the SRIM code (R{sub P} = 870 nm and {delta}R{sub P} = 115 nm). Annealing at temperatures up to 400 deg. C did not change the depth profiles. Annealing at 600 deg. C, however, led to a one-way gradual transfer of the boron atoms from the site of implantation towards the sample surface, and in this way a bimodal profile was created. The amount of boron atoms, transferred to the sample surface, was an increasing function of the annealing time. After annealing at 700 deg. C for 64 hours the bimodal profile collapsed into a single broad distribution, extending from the sample surface up to the implantation depth. The observed phenomena clearly points out the stability of the as-implanted boron depth profiles at lower annealing temperatures. Thermal annealing above 600 deg. C, however, liberates boron atoms, which then predominantly migrate from the implantation site towards the sample surface, where they are captured on some unspecified surface defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗