Search NASA⌕ Search

Engineering topics

Vaidya, Uday Kumar

Publications and source records attributed to Vaidya, Uday Kumar.

Systems, devices, and methods of enhancing carbon fiber dispersion in wet-laid nonwovens

The present subject matter relates to systems, devices, and methods of enhancing carbon fiber dispersion in wet-laid nonwovens. A quantity of fibers is deposited in a medium, and each of one or more stirring elements is moved in a pattern to mechanically agitate the medium. In some embodiments, moving each of the one or more stirring elements includes moving the one or more stirring elements in complementary patterns to induce a chaotic advection current within the medium.

Ghossein, Hicham Kheir↗

Challenges in Postprocessing of Hybrid Manufacturing of Magnet Polymer Composites to Enhance the Energy Product of NdFeB Bonded Magnets

Bonded permanent magnets need to process magnetic filler particles and binder together which is a form of hybrid or composite manufacturing that needs to simultaneously process multimaterials. Polymer bonding of the permanent magnets decreases the energy product of the bonded magnets which varies with square of loading fraction of magnetic materials. However, due to high viscosity of bonding polymer prohibits loading higher than 80 volume % of magnetic materials in most efficient loading process such as compression molding. To further increase the loading of magnetic fraction in the bonded permanent magnets, it is expected to be beneficial to introduce a fraction of nonreacting thermally sacrificial polymer along with permanent bonding polymer in the least permissible of about 20 volume % of the polymer. This process of first adding the sacrificial polymer for higher processability for composites and later removing it via post processing such as heat treatment provides a simple example of inclusion of both the additive and the subtractive stages of hybrid manufacturing. These hybrid composite magnets can be heat treated to remove the sacrificial polymer to further increase the density and energy product which might require to implement hot isostatic pressing for compaction. Although the identification of such ideal polymer requires an extensive polymer chemistry research, we have compression molded several permanent bonding polymers such as nylon, polycarbonate (PC) and polyphenyl sulfide (PPS) and potential sacrificial polymer such as polyoxymethylene (POM), polystyrene (PS), and Acrylonitrile Butadiene Styrene (ABS) and heat treated to remove the sacrificial polymers. It is discovered that oxygen free low temperature pyrolizable polymers could be the potential candidates for increasing the magnet particles loading for achieving high energy products.

36 MATERIALS SCIENCE↗

Compression molding of anisotropic NdFeB bonded magnets in a polycarbonate matrix

Anisotropic bonded Nd 2 Fe 14 B (NdFeB) magnets in a polycarbonate (PC) binder matrix are fabricated using a compression molding process. The weight fractions (w.f.) of NdFeB in PC on the batch mixer are 20, 50, 75, 85 and 95% compared to the twin screw extruder with 20, 50 and 75% respectively. The density of the 95% batch mixed magnets fabricated was 5.34 g/cm 3 and the magnetic properties are, intrinsic coercivity H ci = 942.99 kA/m, remanence B r = 0.86 T, and energy product (BH) max = 120.96 kJ/m 3 . Furthermore, the measured tensile properties are in the range of 27-59 MPa, comparable to that of polyamide (PA), polyphenylene sulfide (PPS) bonded magnets and demonstrating potential for bonded magnet applications. Scanning electron microscopy showed that the onset of failure occurs in the magnetic particle- matrix interface. This study demonstrates that compression additive molding technique can be used to fabricate high performance NdFeB polycarbonate composite magnets with improved mechanical properties.

36 MATERIALS SCIENCE↗

Innovative Method for Enhancing Carbon Fibers Dispersion in Wet-Laid Nonwovens

The production of wet laid (WL) reinforcing fiber mats is adopted from the paper making industry to produce carbon fiber (CF) mats. The resulting mats are prone to defects induced by the mixing regime. Here, this study explores a new mixer design that achieved fully dispersed mats with 20 minutes processing time using 25.4 mm long CF. The proposed mixing method is compared against the traditional method and the density distribution of fibers is characterized using Back Light Scattering (BLS) technique. The mats showed high consistency with less than 8% standard deviation from the data collected from different regions within the mats. The innovative mixer resulted in mats with fiber distribution 70% closer to the theoretical distribution than that of the traditional mixer. This innovative method of preparing nonwoven CF mats will create new opportunities for CF nonwoven composite applications.

36 MATERIALS SCIENCE↗

Biobased bamboo composite development

Resource Fiber LLC identified that bamboo fiber could be integrated with synthetic materials to create stronger, lighter weight and “greener” products. In this Phase I work, Resource Fiber collaborated with the Manufacturing Demonstration Facility of Oak Ridge National Laboratory and the University of Tennessee (MDF). The goal of the collaboration was to conduct proof of concept studies on bamboo fibers with thermoset and thermoplastic resins with a view to create commercial products.

09 BIOMASS FUELS↗

Preparation and characterization of flax, hemp and sisal fiber-derived mesoporous activated carbon adsorbents

The first aim of this study was to investigate mesoporous activated carbon adsorbents from sisal, hemp, and flax fibers by cost-effective methods. Fibers were impregnated with low concentration (20 wt.%) phosphoric acid. Carbonization temperatures were defined by thermal analysis. Bast fibers (hemp, flax) decompose at lower temperatures (419.36°C, 434.96°C) than leaf fibers (sisal, 512.92°C). The second aim was to compare bast and leaf fibers-derived activated carbon adsorbents by determining physical adsorption properties, chemical compositions, scanning electron microscope, and Fourier transform infrared spectroscopy. Results showed that natural fibers have good candidates to prepare mesoporous activated carbon adsorbents with high surface area (1186–1359 m2/g), high mesopore percentage (60–72%), and high C content (80–86%). Even though leaf-derived activated carbon developed more mesoporous structure (72%), bast-derived activated carbons provided higher surface areas (S hemp = 1359 m 2 /g; S flax = 1257 m 2 /g) and C content. Fourier transform infrared spectra for bast fibers-derived activated carbon adsorbents were quite similar while leaf fiber-derived activated carbon adsorbent had a different spectrum.

36 MATERIALS SCIENCE↗