Search NASA⌕ Search

Engineering topics

Vankuren, J. T.

Publications and source records attributed to Vankuren, J. T..

Turbulent two-dimensional jet flow and its effect on laser beam degradation

An experiment in which visible wavelength lasers traversed a well-documented two dimensional jet was conducted. Temperature perturbations varied from 0.25 to 1.80 K and velocity fluctuations ranged from 9.2 to 30.8 m/sec. Measured central spot intensities were as low as 18% of the undisturbed beam, depending on jet Mach number, beam position theory and experiment was two percent in terms of far field intensity. To supplement the flow field information, a laser Doppler velocimeter was developed to measure both mean and fluctuating velocities and a photo correlator was used as a signal processor.

Catalano, G. D.↗

Flow visualization techniques in the Airborne Laser Laboratory program

A turret/fairing assembly for laser applications was designed and tested. Wind tunnel testing was conducted using flow visualization techniques. The techniques used have included the methods of tufting, encapsulated liquid crystals, oil flow, sublimation and schlieren and shadowgraph photography. The results were directly applied to the design of fairing shapes for minimum drag and reduced turret buffet. In addition, the results are of primary importance to the study of light propagation paths in the near flow field of the turret cavity. Results indicate that the flow in the vicinity of the turret is an important factor for consideration in the design of suitable turret/fairing or aero-optic assemblies.

Walterick, R. E.↗

Reduction of unsteady wind torques on an open port airborne optical turret

Techniques for reducing the unsteady torques acting on the inner gimbal of a turret were developed. The reductions in the unsteady torques were obtained by using fixes that alter undesirable flow characteristics or change the acoustic properties of the turret cavity. These fixes were designed to be used in the subsonic and transonic flow regimes. The flow field about the turret generally three dimensional and turbulent, and shock waves formed because of the rapid acceleration of the compressible gas about the blunt turret. The situation was further complicated by the presence of the cavity flow, and the fact that the mouth of the cavity must sweep through a wide angular variation relative to the direction of the freestream. Results indicate that significant reductions of the unsteady pressures measured in the turret cavity could be obtained by the use of porous wind screens around the aperature of the cavity mouth.

Thomas, J. P., Jr.↗

Validity of small scale tests for turret/fairing loads and cavity effects

Data from several wind tunnel experiments along with available flight test data are used to discuss the validity of small scale tests and their inherent limitations. Tests were performed at transonic speeds to measure the turbulence levels in a cavity with and without a forward porous fence, turret drag with and without an aerodynamic fairing, and turret/fairing unsteady pressures.

Mcdermott, D. J.↗