Radiosonde Observations of Environments Supporting Deep Moist Convection Initiation during RELAMPAGO-CACTI
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Varble, Adam.
Explore the source record for details and available documents.
Documents describing how to set up simulations using a novel stochastic mixing scheme within the Weather Research and Forecasting model.
Abstract. This study extends the relative calibration adjustment technique for calibration of weather radars to higher-frequency radars as well as range–height indicator (RHI) scans. The calibration of weather radars represents one of the most dominant sources of error for their use in a variety of fields including quantitative precipitation estimation and model comparisons. While most weather radars are routinely calibrated, the frequency of calibration is often less than required, resulting in miscalibrated time periods. While full absolute calibration techniques often require the radar to be taken offline for a period of time, there have been online calibration techniques discussed in the literature. The relative calibration adjustment (RCA) technique uses the statistics of the ground clutter surrounding the radar as a monitoring source for the stability of calibration but has only been demonstrated to work at S- and C-band for plan-position indicator (PPI) scans at a constant elevation. In this work the RCA technique is modified to work with higher-frequency radars, including Ka-band cloud radars. At higher frequencies the properties of clutter can be much more variable. This work introduces an extended clutter selection procedure that incorporates the temporal stability of clutter and helps to improve the operational stability of RCA for relatively higher-frequency radars. The technique is also extended to utilize range–height scans from radars where the elevation is varied rather than the azimuth. These types of scans are often utilized with research radars to examine the vertical structure of clouds. The newly extended technique (eRCA) is applied to four Department of Energy Atmospheric Radiation Measurement (DOE ARM) weather radars ranging in frequency from C- to Ka-band. Cross comparisons of three co-located radars with frequencies C, X, and Ka at the ARM Cloud, Aerosol, and Complex Terrain Interactions (CACTI) site show that the technique can determine changes in calibration. Using an X-band radar at the ARM Eastern North Atlantic (ENA) site, we show how the technique can be modified to be more resilient to clutter fields that show increased variability, in this case due to sea clutter. The results show that this technique is promising for a posteriori data calibration and monitoring.
General circulation models and downscaled regional models exhibit persistent biases in deep convective initiation location and timing, cloud top height, stratiform area and precipitation fraction, and anvil coverage (e.g., Del Genio 2012, Del Genio et al. 2012, Hohenegger and Stevens 2013, Song et al. 2013). Despite important impacts on the distribution of atmospheric heating, moistening, momentum, and precipitation (e.g., Hartmann et al. 1984, Fritsch et al. 1986, Houze 1989, 2004, Donner et al. 2001, Del Genio and Kovari 2002, Schumacher et al. 2004, Nesbitt et al. 2006, Storelvmo 2012), nearly all climate models fail to represent mesoscale convective organization (Del Genio 2012), while system evolution is not represented at all (Ovchinnikov et al. 2006). Recent advances in cumulus parameterization coupled with increasing model resolution have improved predictions, but even relatively higher-resolution models without parameterized deep convection have some persistent kinematic and microphysical biases (e.g., Blossey et al. 2007, Matsui et al. 2009, Luo et al. 2010, Lang et al. 2011, Varble et al. 2011, Fridlind et al. 2012, Hagos et al. 2014, Varble et al. 2014a-b, Fan et al. 2017, Stanford et al. 2017, Han et al. 2019). To improve representation of convective systems in models requires adequate characterization of their predictability as a function of environmental conditions. Because of the significant sensitivities of deep convective initiation, intensity, lifetime, propagation, and mesoscale convective organization to many factors including multi-scale atmospheric circulations, ambient environmental stability, humidity, wind distributions, and cloud microphysical processes, this characterization relies on comprehensively observing many cases of convective initiation, non-initiation, organization, and non-organization.
Ice microphysics parameterizations in models must make major simplifications relative to observations, typically employing empirical relationships to represent average functional properties of particles. However, previous studies have established that ice particle properties vary even in similar cloud types and thermodynamic environments, and it remains unclear how this so-called “natural variability” impacts simulated deep convection. This uncertainty is addressed by implementing a stochastic framework into the Predicted Particle Properties microphysics scheme in the Weather Research and Forecasting model. The approach stochastically varies the coefficients of the mass-size (m-D) relationship (m=aD b ) for unrimed and partially rimed ice. Using guidance from aircraft in situ measurements obtained during the Midlatitude Continental Convective Clouds Experiment (MC3E), the scheme samples from distributions of the prefactor (a) and the exponent (b) of the m-D relationship. Simulations of two MC3E deep convective cases indicate that the stochastic m-D scheme produces considerable variability of anvil cirrus cloud optical depth (τ) distributions, even for the same ice water path (IWP). Thus, the stochastic scheme produces variable cloud radiative forcing that is independent of IWP. This τ-IWP relationship variability is nonexistent using the deterministic m-D ensemble. Additional sensitivity tests are performed in which the fallspeed-size relationship (V=cD d ) is stochastically varied, resulting in variable precipitation amounts and rain rate distributions. Results are presented in the context of satellite and precipitation observations and include comparison with other ensemble configurations using perturbed initial and lateral boundary conditions and small-amplitude noise added to the potential temperature field.
Convective clouds play an important role in the Earth’s climate system as a driver of large-scale circulations and a primary mechanism for the transport of heat, moisture, aerosols, and momentum throughout the troposphere. Despite their climatic importance, multi-scale models continue to have persistent biases produced by insufficient representation of convective clouds. This is the result of an incomplete understanding of key processes such as convective initiation, updraft and downdraft dynamics, cloud and precipitation microphysics, and aerosol-convection interactions. The Aerosol-Cloud-Precipitation-Climate Initiative, an international research group dedicated to advancing understanding of aerosol impacts on clouds relevant to climate, has identified the Houston, Texas region as an optimal location for targeted studies of aerosol-convection interactions within frequently developing isolated deep convection. Houston lies within a humid subtropical climate regime, where onshore flow and sea-breeze convection interact with a range of aerosol conditions associated with Houston’s urban and industrial emissions. Pilot studies have suggested that convective clouds in this region are potentially significantly impacted by the varying aerosol conditions. To increase our understanding of convective cloud life cycles and aerosol-convection interactions, the Tracking Aerosol Convection Interactions Experiment (TRACER) aims to collect a comprehensive data set focused on the evolution of convective clouds and the environment (including aerosol, cloud, thermodynamics, and lightning) in which the clouds initiate, grow, and decay. A unique component of TRACER is that a large number of individual, isolated convective cells will be tracked and measured in high spatial and temporal resolution for the purposes of: (i) Characterizing and linking convective cloud kinematic and microphysical life cycles, (ii) Quantifying environmental thermodynamic and kinematic controls on convective life cycle properties, (iii) Isolating and quantifying the impacts of aerosol properties on convective cloud kinematic and microphysical evolution. TRACER includes a one-year deployment of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s first ARM Mobile Facility (AMF1) and second-generation C-Band Scanning ARM Precipitation Radar (CSAPR2) aimed at collecting statistical data sets of cloud, precipitation, atmospheric state, and aerosol under varying aerosol loading and local circulation (sea breeze and urban heat island) conditions. A four-month intensive operational period (IOP) from June through September will include deployment of an ancillary site with aerosol, atmospheric state, and precipitation measurements at a location rarely impacted by Houston’s anthropogenic emissions, which will be commonplace near the AMF1 site. Convective cell tracking by the CSAPR2 will provide high-resolution polarimetric and velocity observations under a range of environmental (including aerosol loading) conditions. High-frequency radiosonde launches will capture quickly evolving thermodynamic and kinematic conditions near convective cells, a requirement for isolating aerosol effects on clouds. TRACER will additionally leverage a lightning mapping array, surface meteorological networks, and air pollution networks, and proposals will be entered to deploy additional mobile radar and radiosonde assets during the IOP. This unique combination of cloud, precipitation, lightning, aerosol, and atmospheric state measurements associated with tracked convective cells will ultimately improve our understanding of the convective cloud life cycle and its interaction with individual environmental factors such that improved, next-generation cumulus, microphysics, turbulence, and aerosol parameterizations can be designed.
Not Available
The Point Cloud of Cloud Points (PCCP) data set is composed of 3D coordinates describing the position of cloud features and images from which these coordinates are reconstructed. Images are captured in the daytime by two ARM cloud digital cameras (ACDCs) at CACTI S4a and S4b sites, at 20-second intervals. The two cameras are located at 32.1274oS,64.7139oW, and 32.1185oS, 64.7237oW. The 3D positions are detected with respect to the AMF base location at 32.1264oS, 64.7284oW, and 1141 m above sea level. The PCCP data format is the same as explained in PCCP VAP Technical Report.