Engineering topics
Vasavada, Ashwin
Publications and source records attributed to Vasavada, Ashwin.
Self-Reliant Rover Design for Increasing Mission Productivity
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams, and achieving mission objectives can take longer than anticipated. The objective of this work is to identify changes to flight software and ground operations that enable high levels of productivity with reduced reliance on ground interactions. This will enable the development of Self-Reliant Rovers: rovers that make use of high-level guidance from operators to select their own situational activities and respond to unexpected conditions, all without dependence on ground intervention. In this paper we describe the system we are developing and illustrate how it enables increased mission productivity.
Self-Reliant Rover Design for Increasing Mission Productivity
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams, and achieving mission objectives can take longer than anticipated. The objective of this work is to identify changes to flight software and ground operations that enable high levels of productivity with reduced reliance on ground interactions. This will enable the development of Self-Reliant Rovers: rovers that make use of high-level guidance from operators to select their own situational activities and respond to unexpected conditions, all without dependence on ground intervention. In this paper we describe the system we are developing and illustrate how it enables increased mission productivity.
Scientist-Guided Autonomy for Self-Reliant Rovers
Although Mars rover missions have been highly successful in accomplishing scientific objectives, mission productivity is limited by challenges stemming from the need for commanding ground-based targeted observations under communication constraints imposed by the large distance between Earth and Mars. With an aging fleet of sun-synchronous relay orbiters, the opportunities for regular communication with rovers may become even more limited. In addition to on-board planning, robust navigation, and health assessment, there are strategies to make future rovers more self-reliant by enabling them to perform autonomous scientific characterizations of new areas during periods without an opportunity for ground-based targeted observations. In particular, we have studied how a ”walkabout” strategy, in which an initial high-level characterization of a region is used to informed subsequent passes with specific targeted observations, was used successfully during the investigation of Pahrump Hills by the Mars Science Laboratory. Inspired by this approach, we have identified several capabilities that could allow a rover to autonomously perform some of these initial high-level characterization steps. In this paper, we describe technologies for identifying specific geologic units, regions, or features of interest, identifying areas of contact between two adjacent units, detecting and determining the orientation of layering within rock units, identifying novel and interesting features, and planning observations of regions with different sampling strategies using remote sensing instruments. The observations acquired with these approaches are driven by scientists’ guidance and can provide scientists with data to help inform their decisions about where to make more resource-intensive targeted observations.
Expressing Campaign Intent to Increase Productivity of Planetary Exploration Rovers
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams and achieving mission objectives can take longer than anticipated. Missions have begun investigating ways to enhance productivity by increasing the amount of decision-making performed onboard the rovers. Our work focuses on the use of goal-based commanding as a means of more productively operating rovers. In particular, we are working on ways to convey the intent that operations team use to conduct science campaigns to the rover so that it can guide the rover in creating high quality plans and in identifying its own goals based on operator guidance. In addition to informing future surface exploration missions, this work is relevant for a wide range of applications in which operators must interact with limited communication opportunities.
Expressing campaign intent to increase productivity of planetary exploration rovers
UNKNOWN
A Case Study of Productivity Challenges in Mars Science Laboratory Operations
Achieving consistently high levels of productivity has been a challenge for Mars surface missions. While the rovers have made major discoveries and dramatically increased our understanding of Mars, they often require a great deal of effort from the operations teams and achieving mission objectives can take longer than anticipated. We conducted an in-depth case study of Mars Science Laboratory operations in order to identify the productivity challenges facing surface missions. In this paper, we describe how we performed the case study and analyzed the data. We present and discuss the significant productivity challenges we identified during the study. In addition to informing future surface exploration missions, the study is relevant for a wide range of applications in which operators must interact with a robotic system with limited communication opportunities.
Productivity Challenges for Mars Rover Operations
Achieving consistently high levels of productivity for surface exploration missions has been a challenge for Mars missions. While the rovers have made major discoveries and accomplished a large number of objectives, they often require a great deal of effort from the operations teams and achievingobjectives can take longer than anticipated. This paper describes the early stages of a multi-year project to investigate solutions for enhancing surface mission productivity. A primary focus of this early stage is to conduct in-depth studies of Mars Science Laboratory science campaigns to gain a deeper understanding of the factors that impact productivity, and to use this understanding to identify potential changes to flight software and ground operations practices to increase productivity. We present the science campaigns we have selected along with a conceptual model of how surface missions achieve objectives that is used to guide the study. We also provide some early thoughts on the technologies, and their interactions, which we believe will play an important role in addressing surface mission productivity challenges.We are in the early stages of a multi-year project to studyand address productivity challenges of future surface missions. We have identified campaigns from the MSL missionfor study which we believe will yield valuable informationabout the nature of surface mission productivity challenges.Based on preliminary analysis from the data collected weanticipate that the lessons from these case studies will helpdevelop and mature our concepts for changes to flight andground systems to address these challenges.While the focus of our work is on Mars rover missions, webelieve the concepts in the work will be applicable to a variety of in-situ explorers, including Venus, and Titan, as wellas orbital missions, such as the Europa orbiter. These missions will also benefit from the ability to adapt and respondto the latest state of the spacecraft and its environment.
Mars' Surface Radiation Environment Measured with the Mars Science Laboratory's Curiosity Rover
The Radiation Assessment Detector (RAD) on the Mars Science Laboratorys Curiosity rover beganmaking detailed measurements of the cosmic ray and energetic particle radiation environmenton the surface of Mars on 7 August 2012. We report and discuss measurements of the absorbeddose and dose equivalent from galactic cosmic rays and solar energetic particles on the martiansurface for 300 days of observations during the current solar maximum. These measurementsprovide insight into the radiation hazards associated with a human mission to the surface of Marsand provide an anchor point with which to model the subsurface radiation environment, withimplications for microbial survival times of any possible extant or past life, as well as for thepreservation of potential organic biosignatures of the ancient martian environment.
Data from the Mars Science Laboratory CheMin XRD/XRF Instrument
The CheMin instrument on the Mars Science Laboratory (MSL) rover Curiosity uses a Co tube source and a CCD detector to acquire mineralogy from diffracted primary X-rays and chemical information from fluoresced X-rays. CheMin has been operating at the MSL Gale Crater field site since August 5, 2012 and has provided the first X-ray diffraction (XRD) analyses in situ on a body beyond Earth. Data from the first sample collected, the Rocknest eolian soil, identify a basaltic mineral suite, predominantly plagioclase (approx.An50), forsteritic olivine (approx.Fo58), augite and pigeonite, consistent with expectation that detrital grains on Mars would reflect widespread basaltic sources. Minor phases (each <2 wt% of the crystalline component) include sanidine, magnetite, quartz, anhydrite, hematite and ilmenite. Significantly, about a third of the sample is amorphous or poorly ordered in XRD. This amorphous component is attested to by a broad rise in background centered at approx.27deg 2(theta) (Co K(alpha)) and may include volcanic glass, impact glass, and poorly crystalline phases including iron oxyhydroxides; a rise at lower 2(theta) may indicate allophane or hisingerite. Constraints from phase chemistry of the crystalline components, compared with a Rocknest bulk composition from the APXS instrument on Curiosity, indicate that in sum the amorphous or poorly crystalline components are relatively Si, Al, Mg-poor and enriched in Ti, Cr, Fe, K, P, S, and Cl. All of the identified crystalline phases are volatile-free; H2O, SO2 and CO2 volatile releases from a split of this sample analyzed by the SAM instrument on Curiosity are associated with the amorphous or poorly ordered materials. The Rocknest eolian soil may be a mixture of local detritus, mostly crystalline, with a regional or global set of dominantly amorphous or poorly ordered components. The Rocknest sample was targeted by MSL for "first time analysis" to demonstrate that a loose deposit could be scooped, sieved to <150 microns, and delivered to instruments in the body of the rover. A drilled sample of sediment in outcrop is anticipated. At the time of writing this abstract, promising outcrops are in range and this talk will provide an update on data collected with the CheMin instrument.
Atmospheric Risk Assessment for the Mars Science Laboratory Entry, Descent, and Landing System
In 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry, Descent, and Landing (EDL) systems, by delivering the largest and most capable rover to date to the surface of Mars. As with previous Mars landers, atmospheric conditions during entry, descent, and landing directly impact the performance of MSL's EDL system. While the vehicle's novel guided entry system allows it to "fly out" a range of atmospheric uncertainties, its trajectory through the atmosphere creates a variety of atmospheric sensitivities not present on previous Mars entry systems and landers. Given the mission's stringent landing capability requirements, understanding the atmosphere state and spacecraft sensitivities takes on heightened importance. MSL's guided entry trajectory differs significantly from recent Mars landers and includes events that generate different atmospheric sensitivities than past missions. The existence of these sensitivities and general advancement in the state of Mars atmospheric knowledge has led the MSL team to employ new atmosphere modeling techniques in addition to past practices. A joint EDL engineering and Mars atmosphere science and modeling team has been created to identify the key system sensitivities, gather available atmospheric data sets, develop relevant atmosphere models, and formulate methods to integrate atmosphere information into EDL performance assessments. The team consists of EDL engineers, project science staff, and Mars atmospheric scientists from a variety of institutions. This paper provides an overview of the system performance sensitivities that have driven the atmosphere modeling approach, discusses the atmosphere data sets and models employed by the team as a result of the identified sensitivities, and introduces the tools used to translate atmospheric knowledge into quantitative EDL performance assessments.
Interaction Between Eddies and Mean Flow in Jupiter's Atmosphere: Analysis of Cassini Imaging Data
Beebe et al. [Beebe, R.F., et al., 1980. Geophys. Res. Lett. 17, 1-4] and Ingersoll et al. [Ingersoll, A.P., et al., 1981. J. Geophys. Res. 86, 8733-8743] used images from Voyagers 1 and 2 to analyze the interaction between zonal winds and eddies in Jupiter's atmosphere. They reported a high positive correlation between Jupiter's eddy momentum flux, pu'v', and the variation of zonal velocity with latitude, du/dy. This correlation implied a surprisingly high rate of conversion of energy from eddies to zonal flow: approx. 1.5-3.0 W/sq m, a value more than 10% of Jupiter s thermal flux emission. However, Sromovsky et al. [Sromovsky, L.A., et al., 1982. J. Atmos. Sci. 39,1413-1432] argued that possible biases in the analysis could have caused an artificially high correlation. In addition, significant differences in the derived eddy flux between datasets put into question the robustness of any one result. We return to this long-standing puzzle using images of Jupiter from the Cassini flyby of December 2000. Our method is similar to previous analyses, but utilizes an automatic feature tracker instead of the human eye. The number of velocity vectors used in this analysis is over 200,000, compared to the 14,000 vectors used by Ingersoll et al. We also find a positive correlation between u'v' and du/dy and derive a global average power per unit mass, u'v' du/dy, ranging from (7.1-12.3) x 10(exp -5)W/kg. Utilizing Ingersoll et al.'s estimate of the mass per unit area involved in the transport, this would imply a rate of energy conversion of approx.0.7-1.2 W/sq m. We discuss the implications of this result and employ several tests to demonstrate its robustness.