Engineering topics

Vasco, D. W.

Publications and source records attributed to Vasco, D. W..

8 records

DOE OSTI2023

Innovative Subsurface Learning and Hawaiian Exploration using Advanced Tomography (ISLAND HEAT) Phase 1 (Final Report)

The Innovative Subsurface Learning and Hawaiian Exploration using Advanced Tomography (ISLAND HEAT) project aims to leverage and enhance existing Hawai'i geothermal play fairway analysis (PFA) results and validate a conceptual model-driven, optimized, least-cost exploration and geophysical suite at a proven geothermal field with known permeability, the Puna Geothermal Venture, located in the Lower East Rift Zone. The abundance of geophysical scrutinization before, during, and after the 2018 Kilauea eruption at and around the broader Puna system offers a rare opportunity to elucidate geophysical expressions within a dynamic magmatic rift setting. Development of the methodology continues with its application at a second prospective site identified by the PFA, Mauna Kea, which serves as confirmation of the integrated approach.

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

Seismic monitoring of well integrity

Seismic tube waves, produced by flexure of the well boundary, pressure changes in the fluid in the well, and deformation of the material immediately surrounding the well, are particularly sensitive to variations in the state of the well. In this work, we evaluate a direct approach for generating and observing tube waves as a means of detecting well damage. While we find that it can be difficult to reliably excite observable tube waves without a very strong surface source, time-frequency techniques can be employed to increase the detectability of tube wave reflections. New technologies, particularly distributed acoustic sensing, hold great promise for evaluating well integrity by monitoring tube waves, temperature changes, and seismic noise due to well deformation and fluid leakage.

58 GEOSCIENCES↗

DOE OSTI2021

Monitoring natural gas storage using Synthetic Aperture Radar: are the residuals informative?

Estimates of line-of-sight (LOS) displacements from Interferometric Synthetic Aperture Radar (InSAR) observations serve as the basis of the long-term monitoring of an operating natural gas storage site at Honor Rancho in California. Here, an inversion algorithm is used to estimate the portion of the signal that is attributable to deformation within the gas storage reservoir, located at a depth of around 3 km. Removing this contribution produces residuals that are used to characterize the background variation is surface deformation at the gas storage facility and to determine a threshold that can signify unusually large residuals. An application to almost 7 yr of InSAR data, from 2011 until 2018, indicates that there are intervals of heightened residuals as well as brief episodes of anomalously large misfits. An examination of the spatial distributions of the individual residual LOS displacements indicates larger displacements in an alluvial valley just south of the reservoir, with rapid spatial variations in sign, indicating a rather shallow origin. Furthermore, the two anomalous events also involve rapid spatial variations in the LOS displacement residuals directly above the storage facility. The results demonstrate that the technique of extracting residuals after removing the reservoir signal is a useful approach, even in the case of this deep reservoir, and is a promising method for long-term monitoring.

03 NATURAL GAS↗

DOE OSTI2021

Adjoint-Based Inversion of Geodetic Data for Sources of Deformation and Strain

An adjoint-based formulation leads to a particularly efficient approach for inverting geodetic measurements for the source of the deformation. Specifically, the quantities necessary to iteratively improve the fit to the observations can be computed with just three forward calculations, one to obtain the current residuals, another to solve the adjoint problem, and a third to compute the step length. An inversion algorithm utilizing the adjoint-based gradient is applied to a set of Interferometric Synthetic Aperture Radar (InSAR) data gathered between 2016 and 2018 over the Tulare Basin in California's Central Valley. Because the measured deformation is due to groundwater withdrawal, a penalty function is included in the inversion to avoid placing aquifer volume change in locations that are far from any documented wells. The solution of the inverse problem provides estimates of aquifer compaction that provide a match to the observed range changes while honoring the well data. The solution indicates an average aquifer volume loss of 2.17 km 3 /year over the two year period from January 2016 to January 2018, encompassing one drought year (2016) and one wet year (2017). Finally, this magnitude of lost volume is compatible with the 3.1 km 3 /year decrease in water volume for the entire Central Valley, estimated from GRACE satellite gravity data.

58 GEOSCIENCES↗

DOE OSTI2020

On the use of adjoints in the inversion of observed quasi-static deformation

An adjoint-based conjugate gradient algorithm provides an efficient means for imaging sources of deformation within the Earth, such as volume stresses associated with fluid flow in aquifers and reservoirs. For time intervals over which the overburden deforms elastically, one can calculate the gradient elements for a single model update using just two numerical simulations. The first is a forward run that is used to compute the residuals associated with the given iteration. The second simulation is to evaluate the application of the adjoint operator to the residuals. In this adjoint calculation, the residual displacements are applied as sources at the measurement locations, driving the deformation in the simulation. The volume stress on the source grid blocks, in response to the residual displacements, provide the gradient components. We apply this technique to satellite-based interferometric synthetic aperture radar (InSAR) line-of-sight displacements that were observed over an oil reservoir in California’s Central Valley. Furthermore, we find that the adjoint-based gradient estimates, requiring 18 CPU seconds, agree with conventional numerical calculations that take over 3700 CPU seconds to compute. Conjugate gradient algorithms utilizing the conventional approach and adjoint-based gradient computations give roughly the same reductions in misfit and similar final estimates of reservoir volume change.

58 GEOSCIENCES↗

DOE OSTI2020

Seismicity and Stress Associated With a Fluid-Driven Fracture: Estimating the Evolving Geometry

A coupled approach, combining the theory of rate- and state-dependent friction and methods from poroelasticity, forms the basis for a quantitative relationship between displacements and fluid leak-off from a growing fracture and changes in the rate of seismic events in the region surrounding the fracture. Poroelastic Green's functions link fracture aperture changes and fluid flow from the fracture to changes in the stress field and pore pressure in the adjacent formation. The theory of rate- and state-dependent friction provides a connection between Coulomb stress changes and variations in the rate of seismic events. Numerical modeling indicates that the Coulomb stress changes can vary significantly between formations with differing properties. The relationship between the seismicity rate changes and the changes in the formation stresses and fluid pressure is nonlinear, but a transformation produces a quantity that is linearly related to the aperture changes and fluid leak-off from the fracture. The methodology provides a means for mapping changes in seismicity into fracture aperture changes and to image an evolving fracture. An application to observed microseismicity associated with a hydrofracture reveals asymmetric fracture propagation within two main zones, with extended propagation in the upper zone. Furthermore, the time-varying volume of the fracture agrees with the injected volume, given by the integration of rate changes at the injection well, providing validation of the estimated aperture changes.

58 GEOSCIENCES↗

DOE OSTI2020

An extended trajectory-mechanics approach for calculating two-phase flow paths

A technique originating in quantum dynamics is used to derive a trajectory-based, semi-analytical solution for two-phase flow. The partial differential equation governing the evolution of the aqueous phase is equivalent to a family of ordinary differential equations defined along a path through the porous medium. The trajectories may be found by solving the differential equations directly or by post-processing the output of a numerical solution to the full set of governing equations. The trajectories, which differ from conventional streamlines, are found to bend downward in response to gravitational forces. The curvature is more pronounced as the dip of the porous layer containing the flow increases. Subtle changes in the relative permeability curve can lead to significant variations in the trajectories. The ordinary differential equation for the trajectory provides an expression for the travel time along the path. The expression produces a semi-analytical approximation to the model parameter sensitivities, the partial derivatives of the travel times with respect to changes in the permeability model. The semi-analytical trajectory-based sensitivities generally agree with those computed using a numerical reservoir simulator and a perturbation approach. The sensitivities are useful in tomographic imaging algorithms designed to estimate the spatial variation in permeability within a porous medium using multiphase observations.

58 GEOSCIENCES↗

DOE OSTI2020

Using onset times from frequent seismic surveys to understand fluid flow at the Peace River Field, Canada

With our limited knowledge of the relationship between changes in the state of an aquifer or reservoir and the corresponding changes in the elastic moduli, that is the rock physics model, hampers the effective use of time-lapse seismic observations for estimating flow properties within the Earth. A central problem is the complicated dependence of the magnitude of time-lapse changes on the saturation, pressure, and temperature changes within an aquifer or reservoir. We describe an inversion methodology for reservoir characterization that uses onset times, the calendar time of the change in seismic attributes, rather than the magnitude of the changes. We find that onset times are much less sensitive than magnitudes to the rock physics model used to relate time-lapse observations to changes in saturation, temperature and fluid pressure. We apply the inversion scheme to observations from daily monitoring of enhanced oil recovery at the Peace River field in Canada. An array of 1492 buried hydrophones record seismic signals from 49 buried sources. Time-shifts for elastic waves traversing the reservoir are extracted from the daily time-lapse cubes. In our analysis 175 images of time-shifts are transformed into a single map of onset times, leading to a substantial reduction in the volume of data. These observations are used in conjunction with bottom hole pressure data to infer the initial conditions prior to the injection, and to update the reservoir permeability model. The combination of a global and local inversion scheme produces a collection of reservoir models that are best described by three clusters. The updated model leads to a nearly 70 percent reduction in seismic data misfit. The final set of solutions successfully predict the observed normalized pressure history during the soak and flow-back into the wells between 82 and 175 days into the cyclic steaming operation.

58 GEOSCIENCES↗