Engineering topics

Vaughan, J. C., III

Publications and source records attributed to Vaughan, J. C., III.

5 records

NASA NTRS1980

Technology requirements and readiness for very large aircraft

The technology requirements for designing, manufacturing and operating any vehicle depend largely on the configuration of that vehicle. Under the general heading of Very Large Aircraft (VLA), configurations are many and varied, so, therefore, are the technology requirements. The present work is limited to technology requirements of particular interest to VLA. While many are of common interest, a few technology requirements critical to specific VLA types are also covered. Addressed in turn are common VLA concerns and how they influence configurations and technology; the methodology followed in selecting requirements and assessing readiness; the resultant technology requirements and readiness; and some overall observations regarding technology areas judged to be particularly critical. Over 50 technology requirements are identified as unique or particularly critical to VLA. However, none of the requirements is considered to have an excellent state of technology readiness.

Conner, D. W.↗

NASA NTRS1980

Technology requirements and readiness for very large aircraft

Common concerns of very large aircraft in the areas of economics, transportation system interfaces and operational problems were reviewed regarding their influence on vehicle configurations and technology. Fifty-four technology requirements were identified which are judged to be unigue, or particularly critical, to very large aircraft. The requirements were about equally divided among the four general areas of aerodynamics, propulsion and acoustics, structures, and vehicle systems and operations. The state of technology readiness was judged to be poor to fair for slightly more than one-half of the requirements. In the classic disciplinary areas, the state of technology readiness appears to be more advanced than for vehicle systems and operations.

Conner, D. W.↗

NASA NTRS1979

Multirole cargo aircraft options and configurations

The paper discusses multirole cargo aircraft options and configurations. It was shown that derivatives of current wide-body aircraft would be economically attractive through 2008, but new dedicated airfreighters incorporating 1990 technology would offer little or no economic incentive. Option studies indicate that Mach 0.7 propfans would be economically attractive in trip cost, aircraft price, and airline ROI; spanloaders would be lower priced with higher ROI, but would have a relatively higher trip cost because of aerodynamic inefficiencies. Finally, air cushion landing gear configurations are identified as an option for avoiding runway constraints on airport accommodation of very large airfreighters.

Conner, D. W.↗

NASA NTRS1979

Multirole cargo aircraft options and configurations

A future requirements and advanced market evaluation study indicates derivatives of current wide-body aircraft, using 1980 advanced technology, would be economically attractive through 2008, but new dedicated airfreighters incorporating 1990 technology, would offer little or no economic incentive. They would be economically attractive for all payload sizes, however, if RD and T costs could be shared in a joint civil/military arrangement. For the 1994-2008 cargo market, option studies indicate Mach 0.7 propfans would be economically attractive in trip cost, aircraft price and airline ROI. Spanloaders would have an even lower price and higher ROI but would have a relatively high trip cost because of aerodynamic inefficiencies. Dedicated airfreighters using propfans at Mach 0.8 cruise, laminar flow control, or cryofuels, would not provide any great economic benefits. Air cushion landing gear configurations are identified as an option for avoiding runway constraints on airport requirements and/or operational constraints are noted.

Conner, D. W.↗

NASA NTRS1979

Concept for a large multi-mission amphibian aircraft

A very large aircraft has been proposed for meeting both civil cargo and military transport needs for 1995 and beyond. The concept includes a wide noncircular fuselage cross section with a low wing, thick inner wing section, fuselage-mounted engines, and an air cushion landing gear. The civil freighter operates independently of congested passenger airports, using sheltered water as a runway and a waterfront land site for parking and ground operations. The military transport can operate from a wide variety of surfaces and temporary bases. The air cushion landing gear weighs substantially less than conventional gear and permits the use of extended takeoff distance resulting in improved payload/gross weight ratio.

Vaughan, J. C., III↗