Search NASA⌕ Search

Engineering topics

Vaughan, R.

Publications and source records attributed to Vaughan, R..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Mission Design and Implementation Considerations for Lunar Night Survival

Lunar night survival, while being a technical design challenge, also has an impact on mis-sion planning and execution during the flight system development phases (Phases A-D). Depending on mis-sion objectives, different locations on the lunar surface result in different challenges to technical formulation of a comprehensive mission design and implementa-tion. Equatorial regions have temperature extremes between day and night (<100K to >380K) but are somewhat cyclical and predictable. Polar regions can have milder thermal environments in terms of overall surface temperature swing and opportunities for ex-tended durations for solar power but pose unique chal-lenges in temporal and spatial availability of both sun-light and direct-to-Earth communications. Options for surviving the night will depend heavily on mission objectives, lunar location and program cost and schedule constraints.

Vaughan, R.↗
NASA NTRS2018

NASA Smallsat Technology Advancement and Rapid Test Program

In the heart of Silicon Valley, NASA Ames Research Center has been at the forefront of nanosat development and adoption for the past 20 years. Continuing these efforts, a new program has begun focused on advancing smallsat technologies by on-orbit demonstration of new capabilities in sensors, subsystems and components with a rapid deployment cadence. The initial goal is to have at least two experiment platforms launched every year and to increase the cadence from there. We intend to bridge the TRL valley of death and make incremental progress with actual on-orbit demonstration. New technologies that will enable future NASA, commercial and DoD missions and leveraging SBIR efforts will be targeted and prioritized for flight opportunities. The workshop and labs developing these systems will rely on COTS technology as much as possible and have a great degree of freedom with development practices and policies. Success will be determined by the series of experiments over multiple flights, not by the performance of any one experiment. Lessons learned from the TechEdSat program will be used to incorporate student involvement to enhance the creativity and energy of the program while working alongside experienced engineers. In this presentation, we lay out the framework for this program and invite the community to participate in advancing all of our interests.

Vaughan, R.↗
NASA NTRS2015

Resource Prospector: Mission Goals, Relevance and Site Selection

Over the last two decades a wealth of new observations of the moon have demonstrated a lunar water system dramatically more complex and rich than was deduced following the Apollo era. Observation from the Lunar Prospector Neutron Spectrometer (LPNS) revealed enhancements of hydrogen near the lunar poles. This observation has since been confirmed by the Lunar Reconnaissance Orbiter (LRO) Lunar Exploration Neutron Detector (LEND) instrument. The Lunar Crater Observation and Sensing Satellite (LCROSS) mission targeted a permanently shadowed, enhanced hydrogen location within the crater Cabeus. The LCROSS impact showed that at least some of the hydrogen enhancement is in the form of water ice and molecular hydrogen (H2). Other volatiles were also observed in the LCROSS impact cloud, including CO2, CO, an H2S. These volatiles, and in particular water, have the potential to be a valuable or enabling resource for future exploration. In large part due to these new findings, the NASA Human Exploration and Operations Mission Directorate (HEOMD) have selected a lunar volatiles prospecting mission for a concept study and potential flight in CY2020. The mission includes a rover-borne payload that (1) can locate surface and near-subsurface volatiles, (2) excavate and analyze samples of the volatile-bearing regolith (up to 1 meter), and (3) demonstrate the form, extractability and usefulness of the materials.

Moon↗
NASA NTRS1997

U-Groove Aluminum Weld Strength Improvement

Though butt-welds are among the most preferred joining methods in aerostructures, their strength dependence on inelastic mechanics is generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. One is the source of peaking in which the extreme thermal expansion and contraction gradient of the fusion heat input across the groove tab thickness produces severe angular distortion that induces bending under uniaxial loading. The other is the filler strain hardening decreasing with increasing filler pass sequences, producing the weakest welds on the last weld pass side. Both phenomena are governed by weld pass sequences. Many industrial welding schedules unknowingly compound these effects, which reduce the weld strength. A depeaking index model was developed to select filler pass thickness, pass numbers, and sequences to improve depeaking in the welding process. The result was to select the number and sequence of weld passes to reverse the peaking angle such as to combine the strongest weld pass side with the peaking induced bending tension component side to provide a more uniform stress and stronger weld under axial tensile loading.

Verderaime, V.↗
NASA NTRS1996

U-Groove aluminum weld strength improvement

Though butt-welds are among the most preferred joining methods in aerostructures, their strength dependence on inelastic mechanics is generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. The extreme thermal expansion and contraction gradient of the fusion heat input across the groove tab thickness produces severe peaking, which induces bending under uniaxial loading. The filler strain-hardening decreased with increasing filler pass sequence, producing the weakest welds on the last pass side. Current welding schedules unknowingly compound these effects which reduce the weld strength. A depeaking index model was developed to select filler pass thicknesses, pass numbers, and sequences to improve depeaking in the welding process. The intent is to combine the strongest weld pass side with the peaking induced bending tension to provide a more uniform stress and stronger weld under axial tensile loading.

Verderaime, V.↗
NASA NTRS1995

Aluminum U-groove weld enhancement based on experimental stress analyses

Though butt-welds are among the most preferred joining methods in aerostructures because of their sealing and assembly integrity and general elastic performance; their inelastic mechanics are generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. The extreme thermal expansion and contraction gradient of the fusion heat input across the tab thickness between the grooves produce severe peaking, which induces bending moment under uniaxial loading. The filler strain hardening decreased with increasing filler pass sequence. These combined effects reduce the weld strength, and a depeaking index model was developed to select filler pass thicknesses, pass numbers, and sequences to improve the welding process results over the current normal weld schedule.

Verderaime, V.↗
NASA NTRS1995

U-groove aluminum weld strength improvement

Though butt-welds are among the most preferred joining methods in aerostructures, their strength dependence on inelastic mechanics is generally the least understood. This study investigated experimental strain distributions across a thick aluminum U-grooved weld and identified two weld process considerations for improving the multipass weld strength. The extreme thermal expansion and contraction gradient of the fusion heat input across the groove tab thickness produces severe peaking which induces bending under uniaxial loading. The filler strain-hardening deceased with increasing filler pass sequence, producing the weakest welds on the last pass side. Current welding schedules unknowingly compound these effects which reduce the weld strength. A de-peaking index model was developed to select filler pass thicknesses, pass numbers, and sequences to improve de-peaking in the welding process. Intent is to combine the strongest weld pass side with the peaking induced bending tension to provide a more uniform stress and stronger weld under axial tensile loading.

Verderaime, V.↗
NASA NTRS1994

A First Look at Orbit Determination for the Cassini Mission, Part 2: Saturn Tour

This paper completes the presentation of the first round of orbit determination analysis accomplished as part of Cassini navigation studies. The thrust of the analysis was to characterize operational orbit determination accuracy to first order for selected phases of the mission. The previous paper, Part 1, covered early phases from inner solar system cruise through the approach to Saturn and delivery of the Huygens probe to Titan. Part 2 resumes chronologically where Part 1 left off, covering the tour phase after delivery of the Huygens probe.

Cassini mission orbit determination Saturn Titan↗