Search NASA⌕ Search

Engineering topics

Vazquez, M

Publications and source records attributed to Vazquez, M.

Dependence of magnetization process on thickness of Permalloy antidot arrays

Nanohole films or antidot arrays of Permalloy have been prepared by the sputtering of Ni{sub 80}Fe{sub 20} onto anodic alumina membrane templates. The film thickness varies from 5 to 47 nm and the antidot diameters go from 42 to 61 nm, for a hexagonal lattice parameter of 105 nm. For the thinner antidot films (5 and 10 nm thick), magnetic moments locally distribute in a complex manner to reduce the magnetostatic energy, and their mostly reversible magnetization process is ascribed to spin rotations. In the case of the thicker (20 and 47 nm) antidot films, pseudodomain walls appear and the magnetization process is mostly irreversible where hysteresis denotes the effect of nanoholes pinning to wall motion.

36 MATERIALS SCIENCE↗

Pattern-induced magnetic anisotropy in FePt thin films by ion irradiation

The magnetic properties of FePt thin films have been modified by exposing the samples to irradiation of 4 MeV Cl{sup 2+} ions. Patterned magnetic films, without modified topographical profile, were fabricated by irradiating the films through a shadowing micrometric mask. The structural changes, ascribed to the ion-beam-induced amorphization of the thin films, promote the modification of the magnetic anisotropy. In particular, the out-of-plane component of the magnetization decreases simultaneously with an enhancement of in-plane anisotropy by increasing ion fluence. Moreover, the nonirradiated regions present unexpected anisotropic behavior owing to the stray field of the irradiated regions. The control of this effect, which can have unwished consequences for the patterning of magnetic properties by ion bombardment, needs to be suitably addressed.

36 MATERIALS SCIENCE↗

Asymmetric magnetization reversal process in Co nanohill arrays

Co thin films deposited by sputtering onto nanostructured polymer [poly(methyl methacrylate)] were prepared following replica-antireplica process based on porous alumina membrane. In addition, different capping layers were deposited onto Co nanohills. Morphological and compositional analysis was performed by atomic force microscopy and x-ray photoemission spectroscopy techniques to obtain information about the surface characteristics. The observed asymmetry in the magnetization reversal process at low temperatures is ascribed to the exchange bias generated by the ferromagnetic-antiferromagnetic interface promoted by the presence of Co oxide detected in all the samples. Especially relevant is the case of the Cr capping, where an enhanced magnetic anisotropy in the Co/Cr interface is deduced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Computing the Casimir energy using the point-matching method

We use a point-matching approach to numerically compute the Casimir interaction energy for a two perfect-conductor waveguide of arbitrary section. We present the method and describe the procedure used to obtain the numerical results. At first, our technique is tested for geometries with known solutions, such as concentric and eccentric cylinders. Then, we apply the point-matching technique to compute the Casimir interaction energy for new geometries such as concentric corrugated cylinders and cylinders inside conductors with focal lines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗