Engineering topics

Vega-Montoto, Lorenzo

Publications and source records attributed to Vega-Montoto, Lorenzo.

4 records

DOE OSTI2024

Interaction of Polymethyl Methacrylate with Boehmite-Filmed Aluminum Cladding Under Gamma Irradiation

This paper presents an overview of ongoing work to qualify the Advanced Test Reactor (ATR) driver fuel elements that have been affected by irradiation-degraded polymethyl methacrylate (PMMA) flux wands. Irradiation testing was performed on PMMA material in contact with aluminum clad material. The cladding was prefilmed with a boehmite oxide layer, an important feature of the ATR driver fuel. The effects on the boehmite layer due to gamma irradiation of the PMMA-aluminum clad system were investigated. PMMA embrittlement, followed by softening and degradation, occurred at high radiation levels. Adhesion between the cladding and irradiated PMMA was observed. Flow testing at prototypic ATR flow rates demonstrated the effective removal of the adhered material. Measurements of the boehmite layer thickness were performed, and Raman spectroscopy was utilized to detect the presence of boehmite in the irradiated PMMA material.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Class-based separations of mixed solid–liquid systems with condensable solvent washing and extraction: The dilemma of pizza box recycling

As primary feedstocks deplete across the world, raw material extraction becomes increasingly expensive. Awareness of the environmental impact of primary extraction has motivated the development of energy- and reagent-efficient methods for material reuse. This work confronts an emblematic challenge of modern recycling: the soiled pizza box. While the fibers constituting corrugated cardboard are generally recyclable, pizza contaminants such as sauces and oils complicate their reuse, resulting in municipal prohibitions on the recycling of used pizza boxes in cardboard recycling streams and a representative of 275 kg/year per US household of food waste that is directed to landfill. This challenge is common to many materials, and engineering strategies must be developed to tackle complex/mixed feedstocks. To address the mixed composition of the pizza box (and similar materials), an environmentally benign, non-toxic organic solvent is applied to remove and fractionate components from mixed materials. The solvent employed in this process, dimethyl ether (DME), is a condensable hygroscopic gas, which facilitates its removal and recovery for reuse. Further, the results of this study indicate that 1) DME is capable of solubilizing and extracting components from soiled cardboard and other materials, (resulting in cardboard drier than new/unused cardboard) facilitating its recycling, and 2) the DME-soluble components of the system phase separate into aqueous and fatty acid/oil fractions (potentially ~27.5 kg/year per US household). Condensable solvent-driven washing and extraction enable the efficient separation of multiple intermediate product streams, suggesting a pathway to enable technology development necessary for achieving clean production in a circular economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Failure Mode and Effects Analysis Summary Report

This report provides an overview of the development of failure modes and effects analysis (FMEA) and its implementation as a systematic criticality and risk assessment tool supporting a quality by design (QbD) approach for FCIC research. This report also provides a high-level overview of the results for the FMEA evaluation of two feedstock preprocessing system configurations: (1) generation of pine residue materials for high-temperature pyrolysis conversion and (2) generation of corn stover materials for low-temperature conversion using deacetylation and disc mechanical refining pretreatment for fermentation to hydrocarbons. For the results presented in this report, our FMEA interviews included two approaches. The first approach was to perform FMEA interviews for the entire system of unit operations giving a wholistic system level view. The second approach consisted of detailed interviews for each individual unit operation within the system allowing for a “deep dive” into the specific failures for the individual components within the configuration. These two approaches provide different resolutions of information. The FMEA results of this report were focused on failures associated with meeting critical quality attributes (CQAs) identified for the target conversion processes for each processed feedstock type. The information gathered through the FMEA interviews include estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score. The complete results of all FMEA interviews are provided in the Appendices of this report.

conversion↗

DOE OSTI2023

Exploring the Interplay between Polyphenols and Lysyl Oxidase Enzymes for Maintaining Extracellular Matrix Homeostasis

Collagen, the most abundant structural protein found in mammals, plays a vital role as a constituent of the extracellular matrix (ECM) that surrounds cells. Collagen fibrils are strengthened through the formation of covalent cross-links, which involve complex enzymatic and non-enzymatic reactions. Lysyl oxidase (LOX) is responsible for catalyzing the oxidative deamination of lysine and hydroxylysine residues, resulting in the production of aldehydes, allysine, and hydroxyallysine. These intermediates undergo spontaneous condensation reactions, leading to the formation of immature cross-links, which are the initial step in the development of mature covalent cross-links. Additionally, non-enzymatic glycation contributes to the formation of abnormal cross-linking in collagen fibrils. During glycation, specific lysine and arginine residues in collagen are modified by reducing sugars, leading to the creation of Advanced Glycation End-products (AGEs). These AGEs have been associated with changes in the mechanical properties of collagen fibers. Interestingly, various studies have reported that plant polyphenols possess amine oxidase-like activity and can act as potent inhibitors of protein glycation. This review article focuses on compiling the literature describing polyphenols with amine oxidase-like activity and antiglycation properties. Specifically, we explore the molecular mechanisms by which specific flavonoids impact or protect the normal collagen cross-linking process. Furthermore, we discuss how these dual activities can be harnessed to generate properly cross-linked collagen molecules, thereby promoting the stabilization of highly organized collagen fibrils.

59 BASIC BIOLOGICAL SCIENCES↗