Search NASA⌕ Search

Engineering topics

Velappan, Manikantan

Publications and source records attributed to Velappan, Manikantan.

Analytic Method to Determine Angle Suitability

A method is presented for determining if the connector adaptor assembly (CAA) for a particular unit, as determined by Coordinate Measurement Machine (CMM), is suitable for use in an Alternate Configuration (AC).

42 ENGINEERING↗

Resolution of Tolerance Variations

The connector/adapter assembly (CAA) is one component of a higher-level assembly. A simplified representation of the CAA is illustrated in Figure 1. The location of each CAA is required to meet a specific positional requirement. Several CAAs have been measured and found to be out of tolerance. The connector and the adapter are welded to each other such that the cylindrical axes of the two components are coaxial. The positional tolerance condition requires that all points on the outer surface of the CAA must be within a defined maximum diameter, as illustrated in Figure 1. Two different methods have been developed to measure the CAA positions from coordinate measuring machine (CMM) data. One method (RevD) extrapolates the data from two circles approximately midway from the weld region to each end. The second method (RevF) measures points that are much closer to the actual ends.

42 ENGINEERING↗

CMM Sequential Analysis Program

This report documents a design agency (DA) method to evaluate coordinate measuring machine (CMM) data by constructing an algorithm that is equivalent to the production agency (PA) algorithm for processing the raw CMM data. Several refinements of the CMM analyses were implemented at both the PA and the DA to process inherent limitations of the raw data, such as the absence of measurements at the exact ends of the connector-adapter assembly (CAA) and the recovery from these limitations through (worst-case) adjustments to the the positional errors. Also, inherent errors of the CMM measurements were accommodated by introducing a guard band, which effectively lowered the tolerance so that the CMM code could not pass bad parts. The DA and the PA showed remarkable agreement in all areas of analysis. The ultimate comparison is shown in Figures 13a and 13b, where the effect of using a guard band and end adjustments to the CMM measurements were clearly shown.

42 ENGINEERING↗

A Method for Extrapolating CMM Data

This report provides a method for evaluating coordinate measuring machine (CMM) data and extrapolating the data to estimate the dimensions of a cylindrical component beyond the sampled measurements. The theoretical basis is provided, and a calculational method is presented. The report also provides detailed, formatted, printed, and plotted representations.

36 MATERIALS SCIENCE↗