Search NASA⌕ Search

Engineering topics

Verma, Vandi

Publications and source records attributed to Verma, Vandi.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

First 210 solar days of Mars 2020 Perseverance Robotic Operations – Mobility, Robotic Arm, Sampling, and Helicopter

This paper includes the summary, lessonslearned, and upcoming plans for the first 210 Mars solar days(sols) of the mission. The focus of the paper is on roboticoperations which has the primary responsibility for strategicplanning, uplink commanding and downlink analysis forrover mobility and navigation, robotic arm operation, thesampling and caching capability including coring, theadaptive caching assembly and the 2nd sample handlingrobotic arm, and interface to the Mars helicopter Ingenuity.As of Sol 210 the rover has driven 2663.65 meters, executed20764 robotic arm and sampling commands, and hassuccessfully completed 13 helicopter flights covering 2382meters horizontal distance. It includes the OperationsReadiness Tests in preparation for landing, landing and initialcheckouts, strategic route planning to the science destinationand waypoints, surface checkout of all of the roboticscapability of the rover. It also discusses the strategic planningand tactical agility needed for interleaving scienceinvestigation and technology demonstration of the Marshelicopter flights where a minimum distance had to bemaintained between the rover and helicopter during flights. Itdiscusses the challenges with planning robotic operations andaddressing anomalies with the larger uncertainty presentduring early mission operations. It also discusses the impacton robotic operations from lessons incorporated fromprevious missions.

Ono, Hiro↗
NASA NTRS2022

Perseverance Rover Collision Model for a range of Autonomous Behaviors

The NASA Mars 2020 Perseverance rover landed in Jezero crater on Mars on 18 February 2021. It is a science mission to collect and cache sample cores for possible return to Earth in the future. Robot collision modeling is traditionally used in robotics for hardware safety for manipulation and sampling. The Mars 2020 Rover Collision Model (RCM) optimizes and extends collision checking in innovative ways to provide a range of onboard autonomous capability on a computationally constrained system. It provides an example of the benefit of systems and operations cognizant software design and development of autonomous systems.

Klein, Douglas↗
NASA NTRS2022

How do we get robots to take self-portraits on Mars? – Perseverance-Ingenuity and Curiosity selfies

The Perseverance rover landed in Jezero crater,Mars, on 18 February 2021. It carried with it a technologydemonstration, the Ingenuity helicopter, which hasdemonstrated the first controlled, powered flight on anotherplanet. This paper describes how an iconic, April 2021 imageof the Perseverance rover with the Ingenuity helicopter wasdesigned and executed as the rover was getting ready todeploy the helicopter. WATSON is a camera mounted at theend of the rover’s robotic arm and was used to acquire theself-portrait. WATSON is designed to take close up picturesof rocks and regolith on Mars but can also provide views ofthe terrain. A single image covers a small portion of thescene. In order to a create a mosaic covering the full roverand helicopter, 62 WATSON images were acquired. To allowthe images to be mosaicked together, the camera needs to bekept in the same spot. The robotic arm has five degrees offreedom for motion; small changes in orientation can requiresignificant repositioning of the robotic arm joints. Todocument this, a movie of the arm motion was acquired bythe rover’s mast-mounted left navigation camera pointed atthe WATSON and robotic arm while it was simultaneouslymoving to acquire the selfie. For the first time, we alsocaptured the sound of the arm motion as it was acquiring theselfie. In the case of the Perseverance selfie with the Ingenuity helicopter, we also had to think about how toposition the rover with respect to the helicopter and fit theselfie acquisition into the helicopter prime mission timeline.This paper also describes the history of NASA Mars roverselfies.

Beegle, Luther↗
NASA NTRS2020

Results From the First Four Years of Aegis Autonomous Target-ing for Chemcam on Mars Science Laboratory and New Capability Planned for Supercam on Mars 2020 Rover

Autonomous Exploration for Gathering Increased Science (AEGIS) was uploaded on the NASA Mars Science Laboratory (MSL) Curiosity rover in 2015 for autonomous target selection. This paper presents results from the first four years of its regular opera-tion on Mars for autonomously selecting targets for the ChemCam remote geochemical spectrometer with a focus on the most recent findings. Results show that AEGIS has targeted the most desired material greater than 93% of the time vs 24% without onboard intelligent targeting. There has also been a notable increase in the rate of ChemCam observations. AE-GIS is also part of surface flight software for the NASA Mars 2020 Perseverance rover. This paper describes new AEGIS capabilities that will be availa-ble for autonomously targeting the SuperCam in-strument after the planned 18 February 2021 landing in Jezero crater on Mars.

Castano, R↗
NASA NTRS2019

SSIM: NASA Mars rover robotics flight software simulation

The focus of SSim on MSL was the robotic flight software, including rover mobility and navigation, robotic arm manipulation, and sample acquisition, processing, and delivery. It can execute behaviors in simulation a thousand times faster than they execute in real time on the flight compute element. SSim is used by rover drivers to develop and validate command sequences throughout the planning cycle. SSim has been used to plan all of the Curiosity robotic operations since landing and is expected to continue to be used for the remaining life of the rover.

Leger, Chris↗
NASA NTRS2019

Refactoring the Curiosity Rover's sample handling architecture on Mars

The Curiosity Mars rover sample handling hardware and software were architected assuming that end-to-end sampling operations would occur in a single rover position, from acquisition of a powdered sample with a scoop or drill, through to the cleaning out of all sample residue in the sample chain. However, after analysis of the first drilled samples in Yellowknife Bay, the science team wanted to iterate with additional experiments on Mars and in laboratories on Earth to better understand their results and increase the value of science returned. With the architecture as conceived, the time needed to do so was in direct competition with the exploration of other targets and satisfaction of success criteria during the prime mission.

Kuhn, Stephen↗