Search NASA⌕ Search

Engineering topics

Vesecky, J. F.

Publications and source records attributed to Vesecky, J. F..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Observation of pressure ridges in SAR images of sea ice: Scattering theory and comparison with observations

Ridges and keels (hummocks and bummocks) in sea ice flows are important in sea ice research for both scientific and practical reasons. Sea ice movement and deformation is driven by internal and external stresses on the ice. Ridges and keels play important roles in both cases because they determine the external wind and current stresses via drag coefficients. For example, the drag coefficient over sea ice can vary by a factor of several depending on the fluid mechanical roughness length of the surface. This roughness length is thought to be strongly dependent on the ridge structures present. Thus, variations in ridge and keel structure can cause gradients in external stresses which must be balanced by internal stresses and possibly fracture of the ice. Ridging in sea ice is also a sign of fracture. In a practical sense, large ridges form the biggest impediment to surface travel over the ice or penetration through sea ice by ice-strengthened ships. Ridges also play an important role in the damage caused by sea ice to off-shore structures. Hence, observation and measurement of sea ice ridges is an important component of sea ice remote sensing. The research reported here builds on previous work, estimating the characteristics of ridges and leads in sea ice from SAR images. Our objective is to develop methods for quantitative measurement of sea ice ridges from SAR images. To make further progress, in particular, to estimate ridge height, a scattering model for ridges is needed. Our research approach for a ridge scattering model begins with a survey of the geometrical properties of ridges and a comparison with the characteristics of the surrounding ice. For this purpose we have used airborne optical laser (AOL) data collected during the 1987 Greenland Sea Experiment. These data were used to generate a spatial wavenumber spectrum for height variance for a typical ridge - the typical ridge is the average over 10 large ridges. Our first-order model radar scattering includes both the quasi-specular and Bragg resonant scatter mechanisms. This model is extended to include contributions from volume scatter and scatter from discrete objects. Geometrical characteristics from the AOL survey and model calculations imply that for radar wavelengths and observation geometries that are dominated by the quasi-specular scattering mechanism radar backscatter from a ridge is a measure of peak ridge height. We present scattering model results and compare them with ridges observed during the LEADEX experiment of March-April 1992 when both X, C, and L-band aircraft SAR and the ERS-1 satellite SAR observed a region in the Beaufort Sea near 86 deg N, 10 deg W. Data were also collected documenting ridge characteristics on the surface. The surface data are used to generate a SAR signature via the scattering model described above. The predicted SAR signatures compare well with the SAR observations.

Vesecky, J. F.↗
NASA NTRS1992

Measurement of pressure ridges in SAR images of sea ice - Preliminary results on scattering theory

Sea ice ridges and keels (hummocks and bummocks) are important in sea ice research for both scientific and practical reasons. A long-term objective is to make quantitative measurements of sea ice ridges using synthetic aperture radar (SAR) images. The preliminary results of a scattering model for sea ice ridge are reported. The approach is through the ridge height variance spectrum Psi(K), where K is the spatial wavenumber, and the two-scale scattering model. The height spectrum model is constructed to mimic height statistics observed with an airborne optical laser. The spectrum model is used to drive a two-scale scattering model. Model results for ridges observed at C- and X-band yield normalized radar cross sections that are 10 to 15 dB larger than the observed cross sections of multiyear ice over the range of angles of incidence from 10 to 70 deg.

Vesecky, J. F.↗
NASA NTRS1991

Automated extraction of pressure ridges from SAR images of sea ice - Comparison with surface truth

The authors estimate the characteristics of ridges and leads in sea ice from SAR (synthetic aperture radar) images. Such estimates are based on the hypothesis that bright filamentary features in SAR sea ice images correspond with pressure ridges. A data set collected in the Greenland Sea in 1987 allows this hypothesis to be evaluated for X-band SAR images. A preliminary analysis of data collected from SAR images and ice elevation (from a laser altimeter) is presented. It is found that SAR image brightness and ice elevation are clearly related. However, the correlation, using the data and techniques applied, is not strong.

Vesecky, J. F.↗
NASA NTRS1988

Electromagnetic wave scattering at near-grazing incidence from a gently undulating, rough surface

Models to estimate the reflection coefficient of a statistically rough surface, for example the works of Beckmann, Smith, and Vesecky are discussed. Bistatic radar experiments carried out during the Apollo 16 mission provide a data set with which to compare theoretical models and experimental data. These bistatic S-band radar experiments provide experimental estimates of the Moon's bistatic, forward scatter, reflection coefficient for grazing angles of 2.5 to 78 deg. Theoretical expressions for the reflection coefficient are developed for comparison with these experimental data. At grazing angles below 10 deg the models of Smith and Vesecky compare favorably with the data. Beckmann's model falls significantly more rapidly with decreasing grazing angle than does the data.

Vesecky, J. F.↗
NASA NTRS1987

Spacecraft on-board SAR image generation for EOS-type missions

Spacecraft on-board synthetic aperture radar (SAR) image generation is an extremely difficult problem because of the requirements for high computational rates (usually on the order of Giga-operations per second), high reliability (some missions last up to 10 years), and low power dissipation and mass (typically less than 500 watts and 100 Kilograms). Recently, a JPL study was performed to assess the feasibility of on-board SAR image generation for EOS-type missions. This paper summarizes the results of that study. Specifically, it proposes a processor architecture using a VLSI time-domain parallel array for azimuth correlation. Using available space qualifiable technology to implement the proposed architecture, an on-board SAR processor having acceptable power and mass characteristics appears feasible for EOS-type applications.

Liu, K. Y.↗
NASA NTRS1987

Observing rotation and deformation of sea ice with synthetic aperture radar

The ESA's ERS-1 satellite will carry SARs over the polar regions; an important component in the use of these data is an automated scheme for the extraction of sea ice velocity fields from a sequence of SAR images of the same geographical region. The image pyramid area-correlation hierarchical method is noted to be vulnerable to uncertainties for sea ice rotations greater than 10-15 deg between SAR observations. Rotation-invariant methods can successfully track isolated floes in the marginal ice zone. Hu's (1962) invariant moments are also worth considering as a possible basis for rotation-invariant tracking methods. Feature tracking is inherently robust for tracking rotating sea ice, but is limited when features are floe-lead boundaries. A variety of techniques appears neccessary.

Vesecky, J. F.↗
NASA NTRS1986

Automated remote sensing of sea ice using synthetic aperture radar

Two techniques for automated sea ice tracking: image pyramids (hierarchical correlation) and feature tracking were applied to a pair of SEASAT SAR sea ice images. The results compare well with each other and manually tracked estimates of the ice velocity field. Refinement of the image pyramid technique should include removal of a small number of erroneous velocity vectors using constraints dependent on correlation coefficient, near neighbor velocities, and velocity gradients. Estimates of sea ice velocity are successfully obtained over limited areas using the boundary segment tracking technique. Refinement of the feature tracking technique should include use of pressure ridge features, constrained search, and relaxation techniques.

Vesecky, J. F.↗
NASA NTRS1984

Synthetic aperture radar images of ocean waves, theories of imaging physics and experimental tests

The physical mechanism for the synthetic Aperture Radar (SAR) imaging of ocean waves is investigated through the use of analytical models. The models are tested by comparison with data sets from the SEASAT mission and airborne SAR's. Dominant ocean wavelengths from SAR estimates are biased towards longer wavelengths. The quasispecular scattering mechanism agrees with experimental data. The Doppler shift for ship wakes is that of the mean sea surface.

Vesecky, J. F.↗
NASA NTRS1983

Mechanisms for SAR imaging of ocean surface phenomena: Theory and experiment

Understanding the SAR response to surface wave is a central issue in the analysis of SAR ocean images. The imaging mechanism for gravity waves and the practical question of just which characteristics of the ocean wave field can be measured remotely using SAR were examined. Assessments of wave imaging theory are based primarily on comparisons of the directional wave height variance spectrum psi (K) measured by in situ buoys with estimates from SAR images. Other criteria are also recommended, e.g., the effects of focus adjustments. It is assumed that fluctuations in SAR image intensity are proportional to fluctuations in ocean surface height. If this were true, the Fourier power spectrum of a SAR image and corresponding surface measurements of psi would coincide. Differences between SAR estimates based on this hypothesis and buoy measurements of psi are then used to begin the assessment of rival wave imaging theories.

Vesecky, J. F.↗
NASA NTRS1982

The observation of ocean surface phenomena using imagery from the Seasat synthetic aperture radar - An assessment

The principles governing synthetic aperture radar (SAR) and its use on the Seasat spacecraft are reviewed. The way in which wind stress, surface currents, long gravity waves, and surface films modulate the scattering properties of resonant (approximately 30-cm-wavelength) waves is discussed, with particular emphasis placed on the mechanisms that could produce images of long gravity waves. Doppler effects by ocean motion are also described. Measurements of long (wavelength more than about 100 m) gravity waves made using Seasat SAR imagery are compared with surface measurements during several experiments. Combining these results, it is found that dominant wavelength and direction are measured by Seasat SAR within + or - 12% and + or - 15 deg, respectively. It is noted, however, that ocean waves are not always visible in SAR images, and detection criteria are discussed in terms of wave height, length, and direction.

Vesecky, J. F.↗
NASA NTRS1981

Radio wave scattering observations of the solar corona First-order measurements of expansion velocity and turbulence spectrum using Viking and Mariner 10 spacecraft

Radio wave scattering data were collected at 3.6 and 13 cm wavelengths by means of the radio link between the Viking orbiters and the earth during the Nov. 25, 1976 solar conjunction of Mars, which occurred near the beginning of solar cycle 21; Mariner 10 solar activity observations during 1974 are also used. It is found that the temporal frequency variance spectrum of amplitude fluctuations is useful for characterizing the bulk motion of the plasma, and the spectral index of electron density turbulence is obtained. The measurements of solar wind velocity and spectral index cover 78 days for Viking and 49 days for Mariner 10 and show the combined effects of changing heliocentric distance, solar latitude, and solar longitude as well as solar activity. It is concluded that the observational velocity profile differs significantly from the theoretical profiles in two ways: (1) the theoretical profile does not show the abrupt change in velocity at about 15 solar radii, and (2) the observational profile shows acceleration at larger radial distances than the model profiles. The observational profiles indicate velocities of less than about 150 km/sec out to 15 solar radii.

Tyler, G. L.↗
NASA NTRS1981

Numerical studies of the energy balance in coronal loops

A numerical method is applied to treat the energy balance of quasi-static solar coronal loops, which have been observed to persist for periods much greater than the radiative cooling time. The quasi-static loop model employed takes into account gravity, density-, temperature- or position-dependent energy input, an accurate form of the radiative losses and variable loop cross-sectional area, under assumptions of energy input by coronal heating balanced by radiative and conductive losses, an optically thin plasma, energy conduction along the field lines only and hydrostatic equilibrium. Computations of an emission measure function for various distributions of the energy input and loop geometries are then presented which show that little information on the location of the energy input may be gained from spectral line intensity measurements integrated over a single loop.

Underwood, J. H.↗
NASA NTRS1981

Remote sensing of the ocean waveheight spectrum using synthetic-aperture-radar images

The paper discusses problems in the detection and measurement of ocean waves from their SAR images, in particular the measurement of the wavenumber spectrum of ocean-wave-height fluctuations. Comparisons on a limited set of pitch-roll buoy and SEASAT SAR measurements during the 1978 JASIN experiment reveal that degradation of SAR resolution caused by wave orbital motion is a crucial factor in the detection of waves by SAR images. Thus, waves with small slopes traveling perpendicular to the SAR flight path are more easily detected than waves with large slopes traveling along the flight path. Although the SAR estimates in this comparison were found to contain significant biases, they were in rough agreement with buoy measurements, provided the ocean wavelength was between about 120 and 400 m and the ocean wave direction was not approximately along the SAR flight path.

Vesecky, J. F.↗
NASA NTRS1980

Radar observations of wave transformations in the vicinity of islands

Remote sensing by ground-based HF radar and airborne synthetic aperture radar and in situ wave measurements performed on March 25, 1977 during the West Coast Experiment have made it possible to form an overall picture of the 7-sec-period wave climate over a 35,000 sq km region off the southern California coast. The picture which emerges from these measurements shows a broad deep-ocean directional distribution arriving from the west and being significantly modified as it travels coastward passing San Clemente and Santa Catalina islands.

Vesecky, J. F.↗
NASA NTRS1980

An investigation of wave sheltering by islands

The results of SAR, HF radar, wave rider buoy, and pressure sensor studies of wave behavior around San Clemente Island off the coast of California are reported. The SAR operated at a frequency of 1.2 GHz corresponding to a wavelength of 25 cm at 25 m resolution. Imagery was corrected for the slant range distortion and two-dimensional fast Fourier transforms were used to obtain two-dimensional wave number spectra. A 1 MW source was employed for the HF radar, with a receiving antenna synthesized by mounting the receiver on a van which drove along straight stretches of an oceanside highway. The measurement of 77 m waves displayed a shadow effect after the island, with an unexpected recovery which implies local wave generation. Reflected energy was determined to be too weak to account for the waves, and a nonlinear transfer of wave energy from waves moving parallel to the island was concluded to be the source of the observed inner wave energy.

Hsiao, S. V.↗
NASA NTRS1979

Numerical modeling of quasi-static coronal loops. I - Uniform energy input

A quasi-static numerical model for coronal loops is considered for the case of a uniform energy input per unit volume into the loops. A line dipole model is used to represent the loop magnetic field, and the variations in loop cross section observed in X-ray photographs are parameterized by the ratio between the cross-sectional areas at the loop apex and base. The results of numerical modeling indicate that for an area ratio greater than unity, increases in the area ratio of a loop with a given length and apex area cause a general rise in electron density and a fall in the temperature gradient, leading to large increases in the differential emission factor at high temperatures. The differential function obtained is significantly different from that predicted by analytical models; however, analytical predictions for the temperature-electron density relations are comparable to numerical results. It is also concluded that even a symmetrical loop may have a maximum temperature away from the apex.

Vesecky, J. F.↗
NASA NTRS1978

The analysis of high spatial resolution UV and X-ray images by computational modeling

Very high resolution stereoscopic images of high temperature loop structures observed at UV and X-ray wavelengths in the solar corona can be used to understand physical processes in the corona. An existing computational model is described and sample results are given to demonstrate that computational modeling of coronal structures can indeed take advantage of very high resolution images. The sample results include the run of temperature and number density along a typical loop and the variation of the differential emission measure with temperature. The integration of the differential emission measure with temperature along a column commensurate with an instrument's spatial resolution is the relevant parameter obtained from UV and X-ray observations. The effects of loop geometry and energy input are examined.

Vesecky, J. F.↗