Search NASA⌕ Search

Engineering topics

Vidal, J. F.

Publications and source records attributed to Vidal, J. F..

The MP{sub N} method: a new angular discretization method based on piecewise polynomial interfaces fluxes

In transport calculations, it is well known how S{sub N} method is extremely inefficient in problems where the particle physics is dominated by streaming. The ray-effect eventually produced by the insufficient angular discretization, appears to be extremely persistent with respect to the refinement of the angular quadrature. The MP{sub N} method, that relies on continuous angular representation, offers a robust remedy to such an issue. MP{sub N} is based on the decomposition of the unit sphere into solid angles and on a piecewise continuous definition of interface fluxes, which are expanded in polynomials in each solid angle. This allows propagating more than one angular degree of freedom simultaneously while maintaining unaltered the block-diagonal pattern of the displacement plus removal operator. The method is therefore well suited for the flux resolution by means of a conventional sweep algorithm. Furthermore, unlike the S{sub N} method, MP{sub N} does not rely on discrete directions and, thus, on an angular quadrature formula, but rather constructs a set of linear equations solving for the angular moments of the flux for all discrete solid angles within the sweep. MP{sub N} shows an error convergence rate higher than S{sub N} at the expense of an increased size of the coefficient matrices, so of the computational cost. Although MP{sub N} is not free from ray-effect, the latter is effectively mitigated and less persistent with respect to the increase of the angular refinement order. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Validation of the new code package APOLLO2.8 for accurate PWR neutronics calculations

This paper summarizes the Qualification work performed to demonstrate the accuracy of the new APOLLO2.S/SHEM-MOC package based on JEFF3.1.1 nuclear data file for the prediction of PWR neutronics parameters. This experimental validation is based on PWR mock-up critical experiments performed in the EOLE/MINERVE zero-power reactors and on P.I. Es on spent fuel assemblies from the French PWRs. The Calculation-Experiment comparison for the main design parameters is presented: reactivity of UOX and MOX lattices, depletion calculation and fuel inventory, reactivity loss with burnup, pin-by-pin power maps, Doppler coefficient, Moderator Temperature Coefficient, Void coefficient, UO{sub 2}-Gd{sub 2}O{sub 3} poisoning worth, Efficiency of Ag-In-Cd and B4C control rods, Reflector Saving for both standard 2-cm baffle and GEN3 advanced thick SS reflector. From this qualification process, calculation biases and associated uncertainties are derived. This code package APOLLO2.8 is already implemented in the ARCADIA new AREVA calculation chain for core physics and is currently under implementation in the future neutronics package of the French utility Electricite de France. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mixed Legendre moments and discrete scattering cross sections for anisotropy representation

This paper deals with the resolution of the integro-differential form of the Boltzmann transport equation for neutron transport in nuclear reactors. In multigroup theory, deterministic codes use transfer cross sections which are expanded on Legendre polynomials. This modelling leads to negative values of the transfer cross section for certain scattering angles, and hence, the multigroup scattering source term is wrongly computed. The first part compares the convergence of 'Legendre-expanded' cross sections with respect to the order used with the method of characteristics (MOC) for Pressurised Water Reactor (PWR) type cells. Furthermore, the cross section is developed using piecewise-constant functions, which better models the multigroup transfer cross section and prevents the occurrence of any negative value for it. The second part focuses on the method of solving the transport equation with the above-mentioned piecewise-constant cross sections for lattice calculations for PWR cells. This expansion thereby constitutes a 'reference' method to compare the conventional Legendre expansion to, and to determine its pertinence when applied to reactor physics calculations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Qualification of JEFF3.1.1 library for high conversion reactor calculations using the ERASME/R experiment

With its low CO{sub 2} production, Nuclear Energy appears to be an efficient solution to the global warming due to green-house effect. However, current LWR reactors are poor uranium users and, pending the development of Fast Neutron Reactors, alternative concepts of PWR with higher conversion ratio (HCPWR) are being studied again at CEA, first studies dating from the middle 80's. In these French designs, low moderation ratio has been performed by tightening the lattice pitch, achieving a conversion ratio of 0.8-0.9 with a MOX fuel coming from PWR UOX recycling. Theses HCPWRs are characterized by a harder neutron spectrum and the calculation uncertainties on the fundamental neutronics parameters are increased by a factor 3 regarding a standard PWR lattice, due to the major contribution of the Plutonium isotopes and of the epithermal energy range to the reaction rates. In order to reduce these uncertainties, a 3-year experimental validation program called ERASME has been performed by CEA from 1984 to 1986 in the EOLE reactor. Monte Carlo analysis of the ERASME/R experiments with the Monte Carlo code TRIPOLI4 allowed the qualification of the recommended JEFF.3.1.1 library for major neutronics parameters. K{sub eff} of the MOX under-moderated lattice is over-predicted by 440 {+-} 830 pcm (2{sigma}); the conversion ratio, indicator of the good use of uranium, is also slightly over-predicted: 2 % {+-} 4 % (2{sigma}) and the same for B4C absorber rods worth and soluble boron worth, over-predicted by 2 %, both in the 2 standard deviations range. The radial fission maps of heterogeneities (water-holes, B4C and fertile rods) are well reproduced: maximal (C-E)/E dispersion is 1.3 %, maximal power peak error is 2.7 %. The void reactivity worth is the only parameter poorly calculated with an overprediction of +12.4% {+-} 1.5%. ERASME/R analysis of MOX reactivity, void effect and spectral indexes will contribute to the reevaluation of {sup 241}Am and Plutonium isotopes nuclear data for the next library JEFF3.2. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An improved energy-collapsing method for core-reflector modelization in SFR core calculations using the PARIS platform

In the framework of the ASTRID project, sodium cooled fast reactor studies are conducted at CEA in compliance with GEN IV reactors criteria, particularly for safety requirements. An improved safety requires better calculation tools to obtain accurate reactivity effects (especially sodium void effect) and power map distributions. The current calculation route lies on the JEFF3.1.1 library and the classical two-step approach performed with the ECCO module of the ERANOS code system at the assembly level and the Sn SNATCH solver - implemented within the PARIS platform - at the core level. 33-group cross sections used by SNATCH are collapsed from 1968-group self-shielded cross-section with a specific flux-current weighting. Recent studies have shown that this collapsing is non-conservative when dealing with core-reflector interface and can lead to reactivity discrepancies larger than 500 pcm in the case of a steel reflector. Such a discrepancy is due to the flux anisotropy at the interface, which is not taken into account when cross sections are obtained from separate fuel and reflector assembly calculations. A new approach is proposed in this paper. It consists in separating the self-shielding and the flux calculations. The first one is still performed with ECCO on separate patterns. The second one is done with SNATCH on a 1D traverse, representative of the core-reflector interface. An improved collapsing method using angular flux moments is then carried out to collapse the cross sections onto the 33-group structure. In the case of a simplified ZONA2B 2D homogeneous benchmark, results in terms of k{sub eff} and power map are strongly improved for a small increase of the computing time. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗