Search NASA⌕ Search

Engineering topics

Viezzer, E.

Publications and source records attributed to Viezzer, E..

Performance prediction applying different reduced turbulence models to the SMART tokamak

The SMall Aspect Ratio Tokamak (SMART) is currently being commissioned at the University of Seville and will be able to compare the performance of positive and negative triangularity plasmas at low aspect ratio. Predictive simulations have been performed for different machine scenarios and heating schemes using the TRANSP code. The objectives of these simulations are to predict the parameters expected in positive triangularity plasmas, to guide diagnostic development, and to validate transport models. Several reduced turbulence models have been used to predict electron and ion temperatures for the operational phase 2. All models provide similar results from approximately mid-radius to the separatrix but important discrepancies are found in the core region. These positive triangularity results are compared with experiments from a similar size machine like GLOBUS-M2. The multi-mode model (MMM) shows the best agreement. Simulations with different boundary conditions have been performed and no strong differences have been observed between them. The impact of neutral beam injection (NBI) on the predicted profiles has also been addressed. Rotation reduces turbulence levels so higher temperatures are achieved when included in the simulations. Studying the different contributions to the thermal diffusivities, it is observed that electron temperature gradient (ETG) turbulence dominates at the plasma core while micro-tearing modes (MTM) dominate at the edge in the electron channel. In the ion channel, the neoclassical contribution is dominant at the core and at the very edge while the Weiland component, which includes ion temperature gradient mode (ITG), trapped electron mode (TEM), kinetic ballooning mode (KBM), peeling mode (PM) and collisionless and collision dominated magnetohydrodynamic (MHD) modes governs the mid-radius region. For phase 3, two plasmas with different electron densities have been studied. The case with lower density matches well a specific discharge of GLOBUS-M2. The higher density plasma shows high performance with β N ≈ 3.8.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

Linear magnetohydrodynamic (MHD) simulations for the SMall Aspect Ratio Tokamak (SMART) have been carried out for the first time, for both positive (PT) and negative triangularity (NT) shaped plasmas using the MARS-F code. The MHD stability of projected SMART plasmas against internal kinks, infernal modes and edge peeling-ballooning modes have been analyzed for a wide range of realistic equilibria. A stabilization of internal kinks and infernal modes is observed when increasing the safety factor profile and reducing plasma beta. PT shaped plasmas are more stable against both internal kinks and infernal modes than their counterpart NT shaped plasmas. Toroidal flows have little impact on the MHD stability of the internal kinks, but they have a strong stabilizing effect on infernal modes, which can be further mitigated in NT shaped plasmas. The MHD stability of peeling-ballooning modes is reduced in NT shaped plasmas, as observed in conventional tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a Thomson scattering diagnostic for the SMall Aspect Ratio Tokamak (SMART)

Here, we describe the design of a Thomson scattering (TS) diagnostic to be used on the SMall Aspect Ratio Tokamak (SMART). SMART is a spherical tokamak being commissioned in Spain that aims to explore positive triangularity and negative triangularity plasma scenarios at a low aspect ratio. The SMART TS diagnostic is designed to operate at high spatial resolution, 6 mm scattering length in the low-field side and 9 mm in the high-field side regions, and a wide dynamic range, electron temperature from 1 eV to 1 keV and density from 5 x 10 18 m -3 to 1 x 10 20 m -3 ⁠, to resolve large gradients formed at the plasma edge and in the scrape-off layer (SOL) under different triangularities and low aspect ratios. A 2 J @1064 nm laser will be used that is capable of operating in the burst mode at 1, 2, and 4 kHz to investigate fast phenomena and at 30 Hz to study 1 s (or more) long discharges. The scattered light will be collected over an angular range of 60° – 120° from 28 spatial points in the midplane covering the entire plasma width and the outer midplane SOL. Each scattering signal will be spectrally resolved on five wavelength channels of a polychromator to obtain the electron temperature measurement. We will also present a method to monitor in situ laser alignment in the core during calibrations and plasma operations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and development of the magnetic diagnostic systems for the first operational phase of the SMART tokamak

A set of magnetic diagnostics has been designed, manufactured, and calibrated for the first operational phase of the small aspect ratio tokamak. The sensor suite comprises of Rogowski coils; 2D magnetic probes; and poloidal, saddle, and diamagnetic flux loops. Here, a set of continuous Rogowski coils has been manufactured for the measurement of plasma current and induced eddy currents in conductive elements. A set of flux loops and magnetic probes will be used as input for the reconstruction of the magnetohydrodynamic equilibrium. The quantity and position of these sensors have been verified to be sufficient with synthetic equilibrium reconstructions using the equilibrium fitting code and baseline scenarios computed with the Fiesta code. These sensors will also be used as input for the real-time control system, and magnetic probes will be used for the detection of plasma instabilities. The calibration procedure for the magnetic probes is described, and the results are shown. The signal conditioning and data acquisition systems are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Visible core spectroscopy at Wendelstein 7-X

This paper presents an overview of recent hardware extensions and data analysis developments to the Wendelstein 7-X visible core spectroscopy systems. These include upgrades to prepare the in-vessel components for long-pulse operation, nine additional spectrometers, a new line of sight array for passive spectroscopy, and a coherence imaging charge exchange spectroscopy diagnostic. Progress in data analysis includes ion temperatures and densities from multiple impurity species, a statistical comparison with x-ray crystal spectrometer measurements, neutral density measurements from thermal passive Balmer-alpha emission, and a Bayesian analysis of active hydrogen emission, which is able to infer electron density and main ion temperature profiles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗