Engineering topics

Villanova, John W.

Publications and source records attributed to Villanova, John W..

8 records

DOE OSTI2024

Defect‐Free Nanowelding of Bilayer SnSe Nanoplates

Nanowelding is a bottom‐up technique to create custom‐designed nanostructures and devices beyond the precision of lithographic methods. Here, a new technique is reported based on anisotropic lubricity at the van der Waals interface between monolayer and bilayer SnSe nanoplates and a graphene substrate to achieve precise control of the crystal orientation and the interface during the welding process. As‐grown SnSe monolayer and bilayer nanoplates are commensurate with graphene's armchair direction but lack commensuration along graphene's zigzag direction, resulting in a reduced friction along that direction and a rail‐like, 1D movement that permits joining nanoplates with high precision. This way, molecular beam epitaxially grown SnSe nanoplates of lateral sizes 30–100 nm are manipulated by the tip of a scanning tunneling microscope at room temperature. In situ annealing is applied afterward to weld contacting nanoplates without atomic defects at the interface. This technique can be generalized to any van der Waals interfaces with anisotropic lubricity and is highly promising for the construction of complex quantum devices, such as field effect transistors, quantum interference devices, lateral tunneling junctions, and solid‐state qubits.

2D ferroelectrics↗

DOE OSTI2024

Ghost states and surface structures of the charge density wave kagome metal ScV 6 Sn 6

In this work, we investigate the high-temperature phase of the kagome metal ScV 6 Sn 6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Experimental evidence for nonspherical magnetic form factor in Ru 3 +

The Mott insulator ..alpha..-RuCl3 has generated great interest in the community due to its possible field-induced Kitaev quantum spin liquid state. Despite enormous effort spent trying to obtain the form of the low-energy Hamiltonian, there is currently no agreed upon set of parameters which is able to explain all of the data. A key piece of missing information lies in the determination of the magnetic form factor of Ru3+, particularly for a true quantitative treatment of inelastic neutron scattering data. Here we present the experimentally derived magnetic form factor of Ru3+ in the low spin 4d5 state using polarized neutron diffraction within the paramagnetic regime on high-quality single crystals of ..alpha..-RuCl3. We observe strong evidence of an anisotropic form factor, expected of the spin-orbit coupled jeff=12 ground state. We model the static magnetization density in increasing complexity from simple isotropic cases, to a multipolar expansion, and, finally, ab initio calculations of the generalized jeff=12 ground state. Comparison of both single ion models and inclusion of Cl- anions support the presence of hybridization of Ru3+ with the surrounding Cl- ligands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

First-principles derivation of magnetic interactions in the triangular quantum spin liquid candidates KYb C h 2 ( C h = S , Se , Te ) and A YbSe 2 ( A = Na , Rb )

The AYb Ch 2 (A=alkali metal, Ch=chalcogen) delafossites are a family of crystals which have a triangular lattice of effective S=1/2 moments on their Yb atoms. They hold great promise for the realization of the triangular quantum spin liquid state because of their defect-minimized growth and the ability to interchange chemical constituencies among the family. Here we use ab initio computations to evaluate the exchange couplings of four realized (and one theoretical) rhombohedral delafossite structures and examine the influence of chemical substitution on promoting the development of a quantum spin liquid state. We find good agreement with experiment regarding the antiferromagnetic nearest-neighbor exchange J 1 , but our calculations underestimate J 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Elasticity of two-dimensional ferroelectrics across their paraelectric phase transformation

The mechanical behavior of two-dimensional (2D) materials across 2D phase changes is unknown, and the finite temperature (T) elasticity of paradigmatic SnSe monolayers—ferroelectric 2D materials turning paraelectric as their unit cell turns from a rectangle into a square—is described here in a progressive manner. To begin with, their zero–T total energy landscape gives way to (Boltzmann-like) averages from which the elastic behavior is determined. Furthermore, these estimates are complemented with results from the strain-fluctuation method, which employs the energy landscape or ab initio molecular dynamics data. All approaches capture the coalescence of elastic moduli < C 11 (T) > = < C 22 (T) > due to the structural transformation. The broad evolution and sudden changes of elastic parameters < C 11 (T) >, < C 22 (T) >, and < C 12 (T) > of these atomically thin phase-change membranes establishes a heretofore overlooked connection among 2D materials and soft matter.

2-dimensional systems↗

DOE OSTI2021

Colloquium : Physical properties of group-IV monochalcogenide monolayers

The state-of-the-art knowledge of ferroelectric and ferroelastic group-IV monochalcogenide monolayers is surveyed. These semiconductors feature remarkable structural and mechanical properties, such as a switchable in-plane spontaneous polarization, soft elastic constants, structural degeneracies, and thermally driven two-dimensional structural transformations. Additionally, these 2D materials display selective valley excitations, valley Hall effects, and persistent spin helix behavior. After a description of their Raman spectra, a discussion of optical properties arising from their lack of centrosymmetry (such as an unusually strong second-harmonic intensity, large bulk photovoltaic effects, photostriction, and tunable exciton binding energies) is provided as well. Here, the physical properties observed in these materials originate from (correlate with) their intrinsic and switchable electric polarization, and the physical behavior hereby reviewed could be of use in nonvolatile memory, valleytronic, spintronic, and optoelectronic devices: these 2D multiferroics enrich and diversify the 2D material toolbox.

2D ferroelectrics↗

DOE OSTI2021

Anomalous thermoelectricity at the two-dimensional structural transition of SnSe monolayers

The thermoelectric figure of merit ZT comprises electronic and vibrational contributions that drastically change across phase transitions, and the most common theoretical ab initio approach to thermoelectricity fails to describe the evolution of ZT across finite-temperature structural transitions in its entirety. Furthermore, while the thermoelectric behavior of bulk SnSe has been extensively studied, SnSe monolayers have been experimentally realized only recently, and the existent prediction of thermoelectricity on this two-dimensional material is unreliable because it misses its structural transition altogether. SnSe monolayers (and similar GeS, GeSe, GeTe, SnS, and SnTe monolayers) experience a temperature-induced two-dimensional Pnm2 1 → P4/nmm structural transition precipitated by the softening of vibrational modes, and we describe their thermoelectric properties across the phase transition, using molecular dynamics data to inform both electronic and vibrational coefficients directly and within the same footing. Similar to recent experimental observations pointing to an overestimated ZT past the transition temperature in bulk SnSe, we find a smaller ZT on SnSe monolayers when compared to its value predicted by the standard paradigm, due to the dramatic changes in the electrical conductivity and lattice thermal conductivity as the structural transition ensues. Here, the process described here lends a strong focus to both the vibrational and electronic evolutions throughout the structural transition, and it applies to thermoelectric materials undergoing thermally driven solid-to-solid structural phase transitions in one, two, and three dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Theory of finite-temperature two-dimensional structural transformations in group-IV monochalcogenide monolayers

An account of two-dimensional (2D) structural transformations in 2D ferroelectrics predicts an evolution from a structure with Pnm 2 1 symmetry into a structure with square P4/nmm symmetry and is consistent with experimental evidence, while another argues for a transformation into a structure with rectangular Pnmm symmetry. An analysis of the assumptions made in these models is provided here, and six fundamental results concerning these transformations are contributed as follows: (i) Softened phonon modes produce rotational modes in these materials. (ii) The transformation to a structure with P4/nmm symmetry occurs at the lowest critical temperature T c . (iii) The hypothesis that one unidirectional optical vibrational mode underpins the 2D transformation is unwarranted. (iv) Being successively more constrained, a succession of critical temperatures ( T c < T c ' < T c " ) occurs in going from molecular dynamics calculations with the NPT and NVT ensembles onto models with unidirectional oscillations. (v) The choice of exchange-correlation functional impacts the estimate of the critical temperature. (vi) Importantly, the correct physical picture of these transformations is one in which rotational modes confer a topological character to the 2D transformation via the proliferation of vortices.

2d ferroelectrics↗