Structural phase transitions in yttrium under ultrahigh pressures
Abstract not provided
Engineering topics
Publications and source records attributed to Vohra, Yogesh K.
Abstract not provided
Electrical resistance and crystal structure measurements have been carried out on polycrystalline erbium (Er) at temperatures down to 10 K and pressures up to 20 GPa. An abrupt change in the slope of the resistance is observed with decreasing temperature below 84 K, which is associated with the c-axis modulated (CAM) antiferromagnetic (AFM) ordering of the Er moments. With increasing pressure the temperature of the resistance slope change and the corresponding AFM ordering temperature decrease until vanishing above 10.6 GPa. The disappearance of the slope change in the resistance occurs at similar pressures where the hcp structural phase of Er is transformed to a nine-layer {alpha}-Sm structural phase, as confirmed by our high-pressure synchrotron x-ray diffraction studies. These results suggest that the disappearance in the AFM ordering of Er moments is strongly correlated to the structural phase transition at high pressures and low temperatures.
Ultra high pressure X-ray diffraction studies have been carried out on group IV transition metals-based bulk metallic glass (BMG) Zr{sub 57}Cu{sub 15.4}Ni{sub 12.6}Al{sub 10}Nb{sub 5} to a pressure of 122 GPa at ambient temperature in a diamond anvil cell. Image plate X-ray diffraction studies under high pressure were carried out at a synchrotron source and the two BMG diffraction bands can be followed to the highest pressure using an internal copper pressure standard. Our experiments show that the BMG is stable to compression as high as 40% and thermal activation is needed to nucleate nanostructures/crystallization under extreme conditions. The fit to the Birch-Murnaghan equation of state gives bulk modulus (B{sub 0}) = 116 GPa and its pressure derivative B' = 3.04. The measured differential radial distribution function shows gradual compression of the shell structures in the BMG to extreme compressions.
The crystal structure of EuFe{sub 2}As{sub 2} has been studied up to a pressure of 35 GPa and down to a temperature of 8 K using temperature dependent x-ray diffraction in a diamond anvil cell at a synchrotron source. At 4.3 GPa, we have detected a structural phase transition from a high temperature tetragonal phase with I4/mmm space group to a low temperature orthorhombic phase with Fmmm space group around 120 K. With the application of pressure at a low temperature of 10 K, the orthorhombic phase is suppressed and a phase change to a collapsed tetragonal phase with I4/mmm space group is observed at 11 GPa. This collapsed tetragonal phase is similar to the one observed at ambient temperature and pressure above 8.5 GPa. We have shown that the collapsed tetragonal phase of EuFe{sub 2}As{sub 2} has the same pressure-volume (P-V) equation of state at ambient temperature and at 10 K, implying that the high pressure phase of EuFe{sub 2}As{sub 2} has a negligible thermal expansion coefficient.
High pressure x-ray diffraction and electrical resistance measurements have been carried out on BaFe{sub 2}As{sub 2} to a pressure of 35 GPa and temperature of 10 K using a synchrotron source and designer diamond anvils. At ambient temperature, a phase transition from the tetragonal phase to a collapsed tetragonal (CT) phase is observed at 17 GPa under nonhydrostatic conditions as compared to 22 GPa under hydrostatic conditions. The superconducting transition temperature increases rapidly with pressure up to 34 K at 1 GPa and decreases gradually with a further increase in pressure. Our results suggest that T{sub C} falls below 10 K in the pressure range of 16-30 GPa, where CT phase is expected to be stable under high-pressure and low-temperature conditions.
Abstract not provided
In this study, we report low temperature x-ray diffraction studies combined with electrical resistance measurements on single crystals of iron-based layered superconductor FeSe to a temperature of 10 K and a pressure of 44 GPa. The low temperature high pressure x-ray diffraction studies were performed using a synchrotron source and superconductivity at high pressure was studied using designer diamond anvils. At ambient temperature, the FeSe sample shows a phase transformation from a PbO-type tetragonal phase to a NiAs-type hexagonal phase at 10 {+-} 2 GPa. On cooling, a structural distortion from a PbO-type tetragonal phase to an orthorhombic Cmma phase is observed below 100 K. At a low temperature of 10 K, compression of the orthorhombic Cmma phase results in a gradual transformation to an amorphous phase above 15 GPa. The transformation to the amorphous phase is completed by 40 GPa at 10 K. A loss of superconductivity is observed in the amorphous phase and a dramatic change in the temperature behavior of electrical resistance indicates formation of a semiconducting state at high pressures and low temperatures. The formation of the amorphous phase is attributed to a kinetic hindrance to the growth of a hexagonal NiAs phase under high pressures and low temperatures.
Abstract not provided
Explore the source record for details and available documents.
We have investigated structural and magnetic phase transitions under high pressures in a quaternary rare-earth transition-metal arsenide oxide NdCoAsO compound that is isostructural to the high temperature superconductor parent phase NdFeAsO. The four-probe electrical resistance measurements carried out in a designer diamond anvil cell show that the ferromagnetic Curie temperature and antiferromagnetic Neel temperature increase with an increase in pressure. High pressure x-ray diffraction studies using a synchrotron source show a structural phase transition from a tetragonal phase to a new crystallographic phase at a pressure of 23 GPa at 300 K. The NdCoAsO sample remained antiferromagnetic and non-superconducting down to 10 K and up to the highest pressure achieved in this experiment, 53 GPa. A P-T phase diagram for NdCoAsO is presented from ambient conditions to P = 53 GPa and T = 10 K.
High-pressure x-ray diffraction studies have been carried out on the two group IV transition metals-based bulk metallic glasses (BMGs) Zr{sub 57}Cu{sub 15.4}Ni{sub 12.6}Al{sub 10}Nb{sub 5} and Ti{sub 42}Zr{sub 24}Cu{sub 15.5}Ni{sub 14.5}Be{sub 4} to a pressure of 30 GPa at ambient temperature in a diamond anvil cell. Image plate x-ray diffraction studies under high pressure were carried out at a synchrotron source and the two BMG diffraction bands can be followed to the highest pressure using an internal copper pressure standard. The amorphous phase is observed to be stable to the highest static pressure of 30 GPa suggesting that the phase change observed in dynamical pressure experiments is related to an increase in temperature. The measured bulk modulus (B{sub 0}) and its pressure derivative (B') are 118 GPa and 3.11 for Zr-based BMG and 116 GPa and 2.84 for Ti-based BMG. The measured bulk modulus for BMG's by x-ray diffraction technique is consistent with the ultrasonic measurements. The decompression data reveal an increase in density by 3%-4% at ambient condition after pressure cycling to 30 GPa indicating reduction in excess free volume.
We report pressure-induced amorphization phenomenon in a superconducting compound FeSe0.5Te0.5 toa pressure of 27 GPa in a diamond anvil cell. The synchrotron x-ray diffraction studies reveal that the ambient pressure tetragonal phase (space group P4/nmm) transforms to an amorphous phase at 11.5 GPa during compression and reverts back to the tetragonal phase during decompression at 2.8 GPa. The measured equation of state for the tetragonal phase and the amorphous phase is presented. The disordering of Fe(SeTe)4 tetrahedra under compression is attributed to a kinetic hindrance to a stable phase and is likely to impact its superconducting properties under high pressures.
Abstract not provided