Search NASA⌕ Search

Engineering topics

Volk, Timothy A.

Publications and source records attributed to Volk, Timothy A..

At least 19 records

Belowground Biomass and Root:Shoot Ratios of Three Willow Cultivars at Two Sites

Belowground biomass is an important but less studied component of energy crop systems that is essential in understanding the greenhouse gas benefits of these systems. In this study, a complete above- and belowground biomass inventory (foliage, stems, stools, coarse and fine roots) was performed on three cultivars of short-rotation willow biomass crops at two sites. Mixed models were used to analyze the proportion of biomass allocated to each component and the ratios between different components. The root:shoot (R:S) ratio, defined here as the stable unharvested biomass (stool and coarse roots) divided by the shoot biomass, averaged 0.63 (SE: +0.04). Though the portion of the plant where the willows distributed their belowground biomass varied, the R:S ratio was not significantly different across sites (p = 0.8970), cultivars (p = 0.2834), nor in the site × cultivar interaction (p = 0.8481). These results may be associated with the consistently good growth across sites and limited differences in site conditions. However, the R:S ratios were affected by the overall productivity of the stand (p = 0.0978), with higher producing stands having moderately lower ratios. This information on biomass allocation between components is essential for understanding and estimating the carbon balance of these systems and breeding and selection programs.

09 BIOMASS FUELS↗

Regional Feedstock Partnership Biomass Quality Assessment Final Report

The United States (U.S.) Department of Energy (DOE) developed the Billion-Ton Vision to enable production of one-billion tons of sustainable, reliable biomass for the bioenergy industry by 2030 (Perlack et al., 2005). The Sun Grant Regional Feedstock Partnership (RFP) was organized to fill information gaps and validate biomass yield assumptions related to the Billion-Ton Study (Owens, 2018; Owens, Karlen, and Lacey, 2016). Along with the more than 130 scientific publications generated from these studies, yield and sustainability data from the RFP field trials not only validated the Billion-Ton estimates, but were critical in developing both the U.S. Billion-Ton Update report in 2011 and the 2016 Billion-Ton Report (DOE, 2011; 2016). The intention of this biomass quality assessment report is to build on these initial successes from the RFP field trials by focusing on variability in biomass quality data necessary to evaluate conversion performance. This report contains a summary of chemical quality results from samples collected as part of the RFP field trials. This report focuses on assessment of the impact of experimental agronomic designs on biomass properties followed by analyses of the impact of environmental and production variables on biomass properties. Datasets include species and other genetic variables, fertilizer treatments, harvest information, and yield, as well as other publicly available data such as precipitation, temperature, soil properties, and drought. The key outcomes from this chemical quality focused assessment have included: • Complete evaluation of the impacts of agronomic designs, genetics, and environmental conditions on chemical properties for Miscanthus, switchgrass, sorghum, energycane, mixed perennial grasses, and shrub willow short-rotation feedstocks • Over 30 peer review publications and technical reports focused on variability in quality data • Development of spatial and temporal environmental quality prediction maps for Miscanthus and switchgrass feedstocks allowing for comprehensive evaluation of variability in feedstock chemical quality across U.S. regions and over multiple harvest years

09 BIOMASS FUELS↗

Cut–and–chip harvester material capacity and fuel performance on commercial-scale willow fields for varying ground and crop conditions

Shrub willow (Salix spp.) is capable of producing commercially attractive amounts of biomass in short rotations, but harvesting costs and logistics remain a concern. There is a particular need for information about harvesting operations on larger, commercial short–rotation woody crop systems. Another recent issue on commercial fields in northern New York is commercial growers conducting harvests during the growing season rather than the recommended dormant season when fields may be too wet to harvest. This study evaluated and modeled the in–field performance of a cut–and–chip harvester for almost 700 wagonloads of chips operating in commercial willow fields in a wider array of crop and field conditions than have been previously reported. Analysis indicated that the time of harvest (leaf–on or leaf–off) and whether site conditions were wet or dry affected the harvester's material capacity. Mean material capacity was greatest for leaf–off, dry conditions (71.8 Mg/hr) and lowest for leaf–on harvests, which were similar for wet (30.4 Mg/hr) and dry conditions (29.7 Mg/hr). Mean crop specific fuel consumption ranged between 1.3 and 3.3 L/Mg, but can get considerably higher for standing biomasses below 40 Mg/ha. Wet ground conditions and leaf–on harvests tend to decrease material capacity and increase fuel consumption as the harvester has to divert power to forward movement and material processing. Relationships for material capacity and fuel consumption based on standing biomass, time of harvest and ground conditions will be essential for evaluating and modeling the economic and environmental impacts of commercial–scale willow operations.

09 BIOMASS FUELS↗

Discovery of Geographically Robust Hybrid Poplar Clones

Hybrid poplar clonal growth in the states (regions) of Minnesota (MN), Indiana (IN), Michigan (MI), and New York (NY) USA was analyzed to discover 10 geographically robust (geo-robust) clones, all P. deltoides x P. nigra (D x N) hybrids previously tested and screened in MN, that were broadly adapted across latitudinal and longitudinal ranges of 9 and 20 degrees, respectively. The clonal effect for growth explained 25 to 36 % of the total variance, 2.5–4.1 times the clone x site interaction. Clone explained 24 to 46 % of total variation in canker occurrence on two sites. Genetic gain in growth was calculated relative to commercial check clones. Genetic gain in growth of geo-robust clones exceeded that of random clones by 24 to 44 %. Geo-robust clones and the best clones on each site were not significantly different on the MN sites, but best clones outperformed geo-robust clones on the other sites by 10 to 39 % genetic gain. Geo-robust clones grew faster than commercial check clones on all but the MI site. The reduction in genetic gain for growth due to using broadly adapted clones relative to the best clones has to be compared to the additional costs and benefits of multiple breeding zones.

59 BASIC BIOLOGICAL SCIENCES↗

Positive water linkages of producing short rotation poplars and willows for bioenergy and phytotechnologies

The production of short rotation woody crops (SRWCs) such as poplars and willows is a promising component of global bioenergy and phytotechnology portfolios. In addition to the provision of biomass feedstocks and pollution remediation, these trees and shrubs have been sustainably grown to conserve or utilize water in a variety of applications. Growing these woody plants for multiple uses supports many of the United Nation's Sustainable Development Goals (SDGs), especially Clean Water and Sanitation (SDG6) and Affordable and Clean Energy (SDG7). As a result, focusing on ecosystem services such as freshwater and biomass has become an important aspect of deploying these production systems across variable landscapes. The current review consists of an introduction of ecosystem services and the SDGs, as well as SRWCs and their applications. The middle section of the review contains case studies highlighting the positive water linkages of producing short rotation poplars and willows for bioenergy and phytotechnologies. The review concludes with a section that combines the common themes that are consistent among the case studies to address options for integrating new bioenergy feedstock production systems into rural and urban landscapes to promote environmental, social and economic sustainability. This article is categorized under: Bioenergy > Economics and Policy Bioenergy > Climate and Environment

biomass production↗

Comment on ‘Does replacing coal with wood lower CO 2 emissions? Dynamic lifecycle analysis of wood bioenergy’

The use of wood for bioenergy production results in a worse climate outcome than from using coal. However, many of the assumptions on which their primary wood bioenergy scenario is based are not realistic and therefore are not informative. Assumptions of uncharacteristically long rotations for southern pine plantations, no utilization of wood for longer-duration products, and a single harvest over 100 years understate the carbon performance of current forest management practices. We provide references that support realistic modeling of forest carbon dynamics that are reflective of current practice and therefore more informative.

09 BIOMASS FUELS↗

Hot Water Extraction Improves the Characteristics of Willow and Sugar Maple Biomass With Different Amount of Bark

Shrub willows are being developed as a short rotation woody crop (SRWC) that can grow on marginal agricultural land. Willow has a high net energy ratio (energy produced/ fossil fuel energy consumed), low greenhouse gas footprint and high carbohydrate production potential. Willow biomass can be combined with forest biomass, but willow often has a higher proportion of bark that creates challenges because it increases the ash content and decreases the melting point. Hot water extraction is a pretreatment that has been shown to improve the quality of chipped material while producing a marketable stream of byproducts. This study evaluated how the amount of bark (0%, 33%, 66% and 100%) on three willow cultivars and sugar maple impact the output of hot water extraction in terms of mass removal and extract composition, as well as its influence on the heating value, ash and elemental content. The hot water extraction process resulted in ash content up to 50% for sugar maple and willow, but there was variation among the willow varieties. The heating value after hot water extraction was about 5% higher because of the removal of mostly hemicelluloses, which have relatively low heating value. HWE led to significant reductions of calcium, potassium, magnesium and sulfur contents. The hot water extraction provides a fermentable sugar stream and other coproducts after multiple separation and treatment steps, and improves the characteristics of willow and sugar maple biomass for combined heat and power. This paper demonstrates how biomass with higher bark content can generate a useable sugar stream while improving the quality of the biomass for combined heat and power by managing its ash content while simultaneously producing other valuable products.

09 BIOMASS FUELS↗

A stochastic techno-economic analysis of shrub willow production using EcoWillow 3.0S: A Stochastic Techno-Economic Analysis of Shrub Willow Production Using EcoWillow 3.0S

EcoWillow 3.0S is a techno-economic analysis (TEA) tool that calculates realistic willow biomass production costs using data from field trials of willow production in New York State. The model represents the input parameters for diesel fuel price, wood price, and willow yield as data-derived probability distributions rather than as single values. This study uses EcoWillow 3.0S with Oracle Crystal Ball to perform a stochastic TEA of shrub willow production in the Northeastern United States. Two outputs obtained from this model are a 24-year net present value (NPV) and minimum selling price (MSP) of shrub willow production under price and yield uncertainty. The MSP for dry willow ranges within a 95% confidence interval from $\$ 59$. -$\$ 102$/Mg. The NPV, also within a 95% confidence interval, ranges from -$\$ 153$ 819 to $\$ 207$ 129 for 40 ha of willow harvested seven times over 24 years. The relevance of this study is to utilize the TEA methodology to assess the financial feasibility of shrub willow production as a bioenergy feedstock. The results of this analysis provide the bioenergy field with NPV and MSP probability distributions on shrub willow production that have previously been absent from the refereed literature. Using data collected from field operations over a number of years, EcoWillow 3.0S captures some of the key inputs that influence the variation in the delivered cost of willow biomass crops.

09 BIOMASS FUELS↗

Poplar and shrub willow energy crops in the United States: field trial results from the multiyear regional feedstock partnership and yield potential maps based on the PRISM‐ELM model

Abstract To increase the understanding of poplar and willow perennial woody crops and facilitate their deployment for the production of biofuels, bioproducts, and bioenergy, there is a need for broadscale yield maps. For national analysis of woody and herbaceous crops production potential, biomass feedstock yield maps should be developed using a common framework. This study developed willow and poplar potential yield maps by combining data from a network of willow and poplar field trials and the modeling power of PRISM‐ELM. Yields of the top three willow cultivars across 17 sites ranged from 3.60 to 14.6 Mg ha −1 yr −1 dry weight, while the yields from 17 poplar trials ranged from 7.5 to 15.2 Mg ha −1 yr −1 . Relationships between the environmental suitability estimates from the PRISM‐ELM model and results from field trials had an R 2 of 0.60 for poplar and 0.81 for willow. The resulting potential yield maps reflected the range of poplar and willow yields that have been reported in the literature. Poplar covered a larger geographic range than willow, which likely reflects the poplar breeding efforts that have occurred for many more decades using genotypes from a broader range of environments than willow. While the field trial data sets used to develop these models represent the most complete information at the time, there is a need to expand and improve the model by monitoring trials over multiple cutting cycles and across a broader range of environmental gradients. Despite some limitations, the results of these models represent a dramatic improvement in projections of potential yield of poplar and willow crops across the United States.

09 BIOMASS FUELS↗

Biomass, spacing and planting design influence cut-and-chip harvesting in hybrid poplar

Hybrid poplar is a woody crop grown for the production of bioenergy, biofuels and bioproducts. Harvesting is often the largest single cost in the production system and the development and optimization of equipment is evolving. Here, the objective of this study was to evaluate the performance of a single-pass, cut-and-chip harvesting operation in commercial plantings that included four cultivars, two spacing treatments, and two coppice planting designs (dedicated, and interplanted with sawtimber). Approximately 15 h of harvesting using a New Holland 9080 forage harvester equipped with a purpose-built coppice header was monitored over four days. Stand biomass ranged between 34 and 78 Mg ha –1 of fresh biomass and effective material capacity (C m ) of the harvester ranged from 10 to 78 Mg h –1 of fresh biomass excluding headland activities. Tree spacing had a significant effect on C m but cultivar and planting design did not. The treatments did not have discernible effects on machine fuel consumption (mean 83 L h –1 ; σ 16.4) or crop-specific fuel consumption for fresh biomass (mean 1.34 L Mg –1 ; σ 0.31). Crop-specific fuel consumption was positively correlated with engine load, and negatively correlated with standing biomass; this result was statistically significant but negligible (<1%) in terms of liters of fuel used for each additional Mg ha –1 of stand biomass for engine loads ranging between 30% and 110%.

59 BASIC BIOLOGICAL SCIENCES↗

Economic and life cycle assessments of biomass utilization for bioenergy products

A modeling process was developed to examine the economic and environmental benefits of utilizing energy crops for biofuels and bioproducts. Three energy crops (hybrid willow, switchgrass and miscanthus) that can potentially grow on marginal agricultural land or abandoned mine land in the northeastern United States were considered in the analytical process for the production of biofuels, biopower and pellet fuel. The supply chain components for both the economic analysis and life cycle modeling processes included feedstock establishment, harvest, transportation, storage, preprocessing, conversion, distribution and final usage. Sensitivity analysis was also conducted to assess the effects of energy crop yield, transportation distance, conversion rate, facility capacity and internal rate of return (IRR) on the production of bioenergy products. The required selling price (RSP) ranged from $ 7.7/GJ to $ 47.9/GJ for different bioproducts. The production of biopower had the highest RSP and pellet fuel had the lowest. The results also indicated that bioenergy production using hybrid willow demonstrated lower RSP than the two perennial grass feedstocks. Pellet production presented the lowest greenhouse gas (GHG) emissions (less than 10 kg CO 2 eq per 1,000 MJ) and fossil energy consumption (less than 150 MJ per 1,000 MJ). The production of biofuel resulted in the highest GHG emissions. Sensitivity analysis indicated that IRR was the most sensitive factor to RSP and followed by conversion rate for biofuel and biopower production. As a result, conversion rate and transportation distance of feedstock presented a significant effect on environmental impacts during the production of the bioproducts.

09 BIOMASS FUELS↗

Advances in shrub-willow crops for bioenergy, renewable products, and environmental benefits

Short-rotation coppice systems like shrub willow are projected to be an important source of biomass in the United States for the production of bioenergy, biofuels, and renewable bio-based products, with the potential for auxiliary environmental benefits and multifunctional systems. Almost three decades of research has focused on the development of shrub willow crops for biomass and ecosystem services. The current expansion of willow in New York State (about 500 ha) for the production of renewable power and heat has been possible because of incentive programs offered by the federal government, commitments by end users, the development of reliable harvesting systems, and extension services offered to growers. Improvements in the economics of the system are expected as willow production expands further, which should help lower establishment costs, enhance crop management options and increase efficiencies in harvesting and logistics. As a result, deploying willow in multifunctional value-added systems provides opportunities for both potential producers and end users to learn about the system and the quality of the biomass feedstock, which in turn will help overcome barriers to expansion.

09 BIOMASS FUELS↗