Search NASASearch

Engineering topics

Von Lavante, E.

Publications and source records attributed to Von Lavante, E..

Multiblock, Multigrid Solution Of Euler Equations

Method of numerical solution of Euler equations of three-dimensional flow of compressible fluid involves combination of multiblock and multigrid strategies. In multiblock strategy, flow field divided, into multiple smaller, more computationally-convenient zones and computational grid fitted to applicable flow boundaries generated in each block. In multigrid strategy used here, different quantities computed, variously, on finer or coarser grids. Minimizing cost of computation by using fewest grid points yielding acceptably accurate values of affected variable. Multigrid strategy found effective in accelerating convergence to steady state, while multiblock strategy provides geometric flexibility.

Melson, N. Duane

Accuracy of upwind schemes applied to the Navier-Stokes equations

A systematic comparison was carried out of the different forms of the van Leer et al. (1987) flux-vector splitting scheme (FVSS) for solving the Navier-Stokes equations with Roe's (1981) implicit flux-difference splitting scheme (FDSS) as applied to a simple viscous configuration. Particular attention is given to the effects of spacial accuracy, grid resolution, and grid stretching on the accuracy of the resulting flow field. It was found that, on coarse highly stretched grids, the FDSS produces more accurate results than the FVSS.

Von Lavante, E.

A multiblock multigrid method for the solution of the three-dimensional Euler equations

A general multiblock, multigrid method for the solution of the Euler equations has been developed. Two types of numerical methods were investigated, van Leer's flux-vector-splitting and Roe's flux-difference-splitting, with MUSCL type differencing used in both methods. An explicit two-step method and a multi-stage Runge-Kutta method have been tested. Results are presented for test cases of a channel flow, nozzle exhaust flow, and a transonic wing.

Cannizzaro, Frank E.

Simple explicit upwind schemes for solving compressible flows

Several upwind numerical methods for solving the compressible inviscid and viscous flow equations are discussed. Due to their explicit nature, the schemes are very simple and easy to apply to solutions on multi-block structured grids. Their favorable high frequence damping results in good rates of convergence when combined with multigrid procedures. The schemes are optimized using a simple stability and damping factor analysis. Results for three-dimensional test cases are shown and discussed. Attention is payed to the relative efficiencies of these schemes.

Von Lavante, E.

Calculations of three-dimensional flows using the isenthalpic Euler equations with implicit flux-vector splitting

A numerical method for solving the isenthalpic form of the Euler equations is developed. The method is based on the concept of flux vector splitting in its implicit form applied to a cell centered finite volume scheme. Approximate factorization is implemented in solving the implicit part of the governing equations. Time marching to a steady state solution requires short computational times due to the relative efficiency of the basic method. Computational times are further reduced by the implementation of multigrid. Results for several basic cases are shown.

Cannizzaro, Frank E.

Multigrid acceleration of the isenthalpic form of the compressible flow equations

A numerical method for solving the isenthalpic form of the governing equations for compressible inviscid flows was developed. The method is based on the concept of flux vector splitting in its implicit form and was tested on several demanding configurations. Time marching to steady state was accelerated by the implementation of the multigrid procedure which very effectively increased the rate of convergence. High quality steady-state results were obtained for various test cases and required only short computational times due to the relative efficiency of the basic method.

Melson, N. Duane

Multigrid acceleration of the isenthalpic form of the compressible flow equations

A numerical method for solving the isenthalpic form of the governing equations for compressible inviscid flows was developed. The method is based on the concept of flux vector splitting in its implicit form and was tested on several demanding configurations. Time marching to steady state was accelerated by the implementation of the multigrid procedure which very effectively increased the rate of convergence. High quality steady-state results were obtained for various test cases and required only short computational times due to the relative efficiency of the basic method.

Melson, N. Duane

Simple numerical method for predicting steady compressible flows

The present numerical method for the solution of the isenthalpic form of the governing equations for compressible viscous and inviscid flows has its basis in the concept of flux vector splitting in its implicit form, and has been tested in the cases of several difficult viscous and inviscid configurations. An acceleration of time-marching to steady state is accomplished by implementing a multigrid procedure which effectively increases the convergence rate. The steady state results obtained are largely of good quality, and required only short computational times.

Von Lavante, E.

Simple numerical method for solving the steady Euler equations

A numerical method for solving the isenthalpic form of the governing equations for compressible inviscid flows is developed. The method is based on the concept of flux vector splitting in its implicit form and is tested on several demanding configurations. Time marching to steady state is accelerated by the implementation of the multigrid procedure which very effectively increases the rate of convergence. Steady-state results are obtained for various test cases. Only short computational times are required due to the relative efficiency of the basic method.

Von Lavante, E.

Numerical evaluation of propeller noise including nonlinear effects

Propeller noise in the acoustic near field is presently determined through the integration of the pressure-time history in the tangential direction of a numerically generated flowfield around a propfan of SR-3 type, including the shock wave system in the vicinity of the propeller tip. This acoustic analysis yields overall sound pressure levels, and the associated frequency spectra, as a function of observer location.

Korkan, K. D.

A numerical method for the design and analysis of counter-rotating propellers

A numerical method has been developed using the techniques of Lock and Theodorsen as described by Davidson to design and analyze counter-rotating propellers. The design method develops the optimum propeller geometry by calculating the planform and twist distribution for each propeller disk through the use of specific inputs of engine shaft horsepower, diameter, and disk spacing. The analysis method calculates the performance of a given counter-rotating propeller system at any flight condition. Using the NACA four-digit airfoil family, the performance of a counter-rotating propeller design for a given flight condition was investigated in the design and analysis mode.

Playle, S. C.

The effects of various implicit operators on a flux vector splitting method

Three different implicit operators in a numerical method for solving the two-dimensional steady Euler equations using flux vector splitting are investigated. These include the implementation of the true Jacobian matrices in the implicit part, the use of their splitting approximate form, and a modification of the implicit part of the scheme that uses the scalar form of the implicit part based on the spectral radii of the split Jacobian matrices. The three versions of the basic algorithm are compared with the results given by two common numerical methods using several two-dimensional test cases. Special attention is paid to the quality of results as well as computational efficiency and convergence properties.

Von Lavante, E.