Search NASA⌕ Search

Engineering topics

Wachs, Israel E.

Publications and source records attributed to Wachs, Israel E..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Practical Considerations for Understanding Surface Reaction Mechanisms Involved in Heterogeneous Catalysis

Acquiring useful knowledge about the active site(s) of a catalyst, nature of reactant–catalyst interactions, nature of reactive intermediates, rate-determining step, reaction rate orders that affect various process parameters, and reaction mechanism as a whole is exceedingly challenging. This is especially true in the case of heterogeneous catalysts due to the complexity of the nature of surface active sites and their nonstatic behavior. Here, we present our perspective on differentiating between various surface reaction mechanisms in light of pioneering studies by leaders in the field, with the aim of clarifying some of the confusion associated with these complex mechanisms, especially the Eley–Rideal mechanism. Using bibliometric analysis, we identify and discuss the following four reactions that most commonly invoke the Eley– Rideal mechanism: H 2 activation, CO oxidation, esterification of alcohols by acids, and selective catalytic reduction (SCR) of NO x with NH 3 . Our analysis of studies utilizing well-suited experimental and computational methodologies for differentiating surface reaction mechanisms suggests that the above-mentioned four reactions do not occur via the Eley–Rideal mechanism. Instead, each reaction occurs via the Langmuir–Hinshelwood mechanism with nonidealities present. Lastly, we highlight practical considerations regarding select experimental (characterization methods and differential kinetics) and computational modeling that we believe can provide useful insights to accurately discern between the various possible reaction mechanisms in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Oxygen‐Assisted Supercapacitive Swing Adsorption of Carbon Dioxide

Abstract We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.

Bilal, Muhammad↗
DOE OSTI2024

Oxygen‐Assisted Supercapacitive Swing Adsorption of Carbon Dioxide

We report on the supercapacitive swing adsorption (SSA) of carbon dioxide at different voltage windows in the presence of oxygen using activated carbon electrodes, and deliquescent, aqueous electrolytes. The presence of O 2 in the CO 2 /N 2 gas mixture results in an up to 11 times higher CO 2 adsorption capacity with 3 M MgBr 2 (at 0.6 V) and up to 4–5 times higher adsorption capacity with 3 M MgCl 2 (at 1 V). A tradeoff between high CO 2 adsorption capacities and lower coulombic efficiencies was observed at voltages above 0.6 V. The energetic and adsorptive performance of the electrodes in the presence of oxygen below 0.5 V was similar to the performance with a CO 2 /N 2 mixture without oxygen at 1 V. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the electrodes demonstrate that the specific capacitance increases while the diffusion resistance decreases in the presence of oxygen. Oxygen concentrations ranging between 5–20 % give similar energetic and adsorptive performance. The electrodes exhibit stable performance for up to 100 cycles of operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Plasma-assisted manipulation of vanadia nanoclusters for efficient selective catalytic reduction of NO x

Supported nanoclusters (SNCs) with distinct geometric and electronic structures have garnered significant attention in the field of heterogeneous catalysis. However, their directed synthesis remains a challenge due to limited efficient approaches. This study presents a plasma-assisted treatment strategy to achieve supported metal oxide nanoclusters from a rapid transformation of monomeric dispersed metal oxides. As a case study, oligomeric vanadia-dominated surface sites were derived from the classic supported V 2 O 5 -WO 3 /TiO 2 (VWT) catalyst and showed nearly an order of magnitude increase in turnover frequency (TOF) value via an H 2 -plasma treatment for selective catalytic reduction of NO with NH 3 . Such oligomeric surface VO x sites were not only successfully observed and firstly distinguished from WO x and TiO 2 by advanced electron microscopy, but also facilitated the generation of surface amide and nitrates intermediates that enable barrier-less steps in the SCR reaction as observed by modulation excitation spectroscopy technologies and predicted DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of the Molecular Structure of Surface Vanadia on Activity and Regenerability of VO $x$ /In 2 O 3 Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane

Our recent work has reported that higher propylene selectivity and improved stability can be achieved by combining redox-active VO $x$ and basic In 2 O 3 for CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP). In the present work, we continued to explore the stability and regenerability of V/In catalysts. In particular, our interest lies in identifying the effect of mono- and polyvanadate on catalytic performance and regenerability. A V/In catalyst with an increased proportion of monovanadate was prepared using the Schlenk line under moisture-free conditions (V/In–S), while the fully polymerized vanadate catalyst was prepared through a regular impregnation (V/In) for comparison. The Schlenk-line-prepared catalyst, namely, V/In–S, not only exhibits a 17–30% enhanced propylene yield at high temperatures (500–540 °C) over V/In but also presents improved stability and regenerability with nearly 88% activity recovered after regeneration in O 2 . Detailed characterizations have been performed to reveal the catalyst structure–performance relationship, including chemisorption (NH 3 /CO 2 -temperature-programmed desorption, NH 3 /CO 2 -TPD), H 2 -temperature-programmed reduction (H 2 -TPR), and spectroscopic studies [Raman spectroscopy, UV–vis diffuse reflectance spectroscopy (UV–vis DRS), near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), and high-sensitivity low-energy ion scattering (HS-LEIS)]. Characterization results demonstrate that compared with polyvanadates, monovanadates lead to strengthened interaction with In 2 O 3 and a more stabilized V/In surface and subsurface, as well as improved redox properties of VO $x$ . These advantages give rise to the observed enhancement in activity, stability, and regenerability. In conclusion, these findings advance the understanding of the relationship between the activity/stability and the molecular structure of surface oxide species (vanadia) and the interplay between acid–base interactions and redox properties of mixed metal-oxide catalysts for efficient CO 2 -ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Olefin metathesis over supported MoO x catalysts: influence of the oxide support

Here, a series of supported MoO x catalysts on different oxide supports (Al2O3, TiO2, ZrO2, SiO2) were synthesized and investigated for propylene metathesis, characterized with in situ spectroscopies (DRIFTS, Raman, UV-vis) and chemically probed with propylene-TPSR-MS, propylene-TPSR-IR, and ethylene/2-butene titration. Under dehydrated conditions at monolayer coverage or maximum surface dispersion, the surface MoO x sites are present as a mixture of isolated di-oxo (O=) 2 Mo(–O–Al) 2 and oligomeric mono-oxo O=Mo(–O–Al) 4/5 sites on Al 2 O 3 , primarily oligomeric mono-oxo O=Mo(–O–Ti) 4/5 on TiO 2 , isolated di-oxo (O=) 2 Mo(–O–Zr) 2 and oligomeric mono-oxo O=Mo(–O–Zr) 4/5 on ZrO 2 , and isolated di-oxo (O=) 2 Mo(–O–Si) 2 on SiO 2 . The bridged (S 2 -OH) and tri-coordinated (S 3 -OH) anchoring surface hydroxyls of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at low temperatures (<100 °C). The isolated anchoring surface hydroxyls (S-OH) of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at high temperatures (>350 °C). Olefin metathesis by the more redox active supported MoO x /TiO 2 and MoO x /ZrO 2 catalysts is retarded by the formation of stable surface acetone and acetate species that block olefin adsorption. The oxide supports are potent ligands that tune the activation and surface chemistry of the surface MoOx sites for olefin metathesis. This is the first time that the influence of oxide supports on the activation and surface chemistry of supported MoO x sites has been systematically examined.

02 PETROLEUM↗
DOE OSTI2022

Dependency of CO 2 methanation on the strong metal-support interaction for supported Ni/CeO 2 catalysts

The strong metal-support interaction (SMSI) for supported Ni/CeO 2 catalysts with different CeO 2 nanomorphologies was systematically explored. The degree of encapsulation of Ni particles originating from the SMSI effect was found to follow the trend of Ni/CeO 2 -(1 1 1) > Ni/CeO 2 -(1 0 0) > Ni/CeO 2 -(110 + 100), which parallels the CO 2 hydrogenation activity. Quasi in situ XPS reveals the presence of Ce 3+ sites in accordance with the formation of an amorphous surface CeOx layer encapsulating the Ni nanoparticles. In situ DRIFTS indicates the reaction pathway and rate-determining step are dependent on the degree of the SMSI effect, leading to distinct selectivities towards CH 4 , especially at a high weight hourly space velocity (WHSV). Finally, these findings present a fundamental strategy about tailoring catalytic performance through support facet dependent susceptibility of SMSI phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular structure and catalytic promotional effect of Mn on supported Na 2 WO 4 /SiO 2 catalysts for oxidative coupling of methane (OCM) reaction

The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Molecular Design of Supported MoO x Catalysts with Surface TaO x Promotion for Olefin Metathesis

A series of supported 3% MoOx catalysts were synthesized by incipient-wetness impregnation of 5%-15% TaO x surface modified γ-Al 2 O 3 support. The catalysts were characterized by in situ spectroscopies (DRIFTS, Raman, UV-vis, XAS) and multiple chemical probes (C 2 H 4 /C 4 H 8 titration, C 3 H 6 -TPSR, steady state propylene metathesis, NH 3 -IR adsorption). The supported tantalum oxide phase was present as surface TaO x sites on the γ-Al 2 O 3 support that capped that Al 2 O 3 surface hydroxyls. The change in available surface hydroxyls caused the subsequent anchoring of MoOx species to occur at different surface hydroxyls. This shifted the anchoring of MoO x species from basic (Al-OH) to neutral (Al 2 -OH) to more acidic (Al 3 -OH) surface hydroxyls as well as perturbation of the remaining alumina surface hydroxyls by the surface TaO x sites. The TaO x surface modified γ-Al 2 O 3 support increased the number of activated surface MoO x sites (Ns) by ~6x and the TOF by ~10x resulting in an increased activity of ~60x. In conclusion, It was found that the specific anchoring surface hydroxyls rather than the extent of oligomerization of the surface MoO x sites control the number of activated MoO x sites and TOF for propylene metathesis. No relationship between the nature of the surface Lewis/Brønsted acid sites and Ns and TOF were found to be present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The effect of non-redox promoters (AlO x , PO x , SiO x and ZrO x ) and surface sulfates on supported V 2 O 5 -WO 3 /TiO 2 catalysts in selective catalytic reduction of NO with NH 3

The SCR activity of MO x (M=Al, P, Si, Zr) promoted V 2 O 5 -WO 3 /TiO 2 was investigated before and after sulfation. In situ IR spectroscopy indicated that the VO x active sites preferentially anchor on promoter generated surface hydroxyl. In situ Raman spectroscopy confirmed that all oxides are completely dispersed on the TiO 2 surface. In situ NH 3 -IR spectroscopy showed that the oxides can increase the Lewis (AlO x and ZrO x ) and Brønsted (PO x , SiO x , VO x , WO x and SO x ) acid site concentrations. The SiO x and ZrO x promoters had little effect on NO conversion, while the AlO x and PO x promoters and surface sulfation generally inhibited it. The SiO x promoted catalyst was highly SCR active despite lacking Lewis acid sites, indicating that they are not vital for SCR. Finally, the N 2 O formation activity of the catalyst was inhibited by surface sulfation and the promoters, correlating with the promoter and SO x induced increase in the Brønsted acid sites’ strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of redox promoters (CeO x and CuO x ) and surface sulfates on the selective catalytic reduction (SCR) of NO with NH 3 by supported V 2 O 5 -WO 3 /TiO 2 catalysts

A series of TiO 2 -supported MO x catalysts (M=V, W, Ce, Cu and S) were investigated for their SCR activity. In situ Raman spectroscopy indicated that the supported MO x phases were completely dispersed as surface sites on the TiO 2 support. In situ IR revealed that surface VO x , WO x and SO x sites anchored at both CeO x /CuO x and TiO 2 sites. The number of surface Lewis acid sites decreased with the addition of basic (CeO x /CuO x ) and acidic (VO x /WO x ) sites in all catalysts, and acidic SO x in the unpromoted and Ce-promoted catalysts. The surface VO x , WO x and SO x sites introduced surface Brønsted acid sites. The redox promoters increased the NO conversion, but SO x impregnation inhibited their effect due to acid (SO x )-base (CeO x /CuO x ) interactions. Finally, the SCR reaction was shown to efficiently proceed via either surface NH 3 * or NH 4 +* species, resolving the long-standing dispute on the involvement of these species in the SCR reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Number of surface sites and turnover frequencies for oxide catalysts

Unlike for metal catalysts where selective chemisorption probes (H 2 , O 2 , CO and N 2 O) have been successfully applied to count the number of active surface sites and allow determination of TOF values, the analogous situation for oxide catalysts has developed very slowly. The reason for the sluggish development of selective chemisorption probes for oxides is that the same chemisorption probes that work well with metals aren’t compatible with oxides since these chemical probes weakly adsorb on oxides. Methanol, however, is a very reactive molecule that has been found to readily chemisorb on oxides and allows for quantitative determination of the number of active surface sites (Ns). Here, in this mini-review, the determination of the number of active sites by methanol chemisorption is reviewed with examples for pure oxides (one-component oxides), supported oxides (submonolayer, monolayer and above monolayer) and bulk mixed oxides (surface enriched oxide present in submonolayer, monolayer and in excess of monolayer coverages).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗