Search NASA⌕ Search

Engineering topics

Wagner, A.

Publications and source records attributed to Wagner, A..

At least 19 records

Photo-response of the $N=Z$ nucleus $^{24}$Mg

The electric E1 and magnetic M1 dipole responses of the N = Z nucleus 24 Mg were investigated in an inelastic photon scattering experiment. The 13.0 MeV electrons, which were used to produce the unpolarised bremsstrahlung in the entrance channel of the 24 Mg(γ,γ') reaction, were delivered by the ELBE accelerator of the Helmholtz-Zentrum Dresden-Rossendorf. The collimated bremsstrahlung photons excited one J π = 1 – , four J π = 1 + , and six J π = 2 + states in 24 Mg. De-excitation γ rays were detected using the four high-purity germanium detectors of the γELBE setup, which is dedicated to nuclear resonance fluorescence experiments. In the energy region up to 13.0 MeV a total B(M1)↑ = 2.7(3) $μ$$^{2}_{N}$ is observed, but this N = Z nucleus exhibits only marginal E1 strength of less than ΣB(E1)↑≤ 0.61 × 10 –3 e 2 fm 2 . The B(Π1, $1$$^{π}_{i}$ → $2$$^{+}_{1}$)/B(Π1,$1$$^{π}_{i}$ → $0$$^{+}_{gs}$) branching ratios in combination with the expected results from the Alaga rules demonstrate that K is a good approximative quantum number for 24 Mg. The use of the known ρ 2 (E0, $0$$^{+}_{2}$ → $0$$^{+}_{gs}$) strength and the measured B(M1,1 + → $0$$^{+}_{2}$)/B(M1,1 + → $0$$^{+}_{gs}$) branching ratio of the 10.712 MeV 1 + level allows, in a two-state mixing model, an extraction of the difference Δ$β$$^{2}_{2}$ between the prolate ground-state structure and shape-coexisting superdeformed structure built upon the 6432-keV $0$$^{+}_{2}$ level.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Vacancy complexes in Cd 3 As 2

Epitaxial growth of the three-dimensional topological semimetal Cd 3 As 2 on semiconductor substrates enables its use and integration in device applications. Epitaxy also provides an avenue for varying and controlling point defects through modification of the chemical potential during growth. In turn, knowledge of the point defects that are generated in Cd 3 As 2 epilayers will aid the interpretation of electron transport behavior and guide growth efforts to produce material with low defect densities. Point defects in Cd 3 As 2 epilayers grown by molecular beam epitaxy with varying As/Cd flux ratios are probed by positron annihilation spectroscopy. We find that lower As/Cd flux ratios produce higher concentrations of point defects. Remarkably, the measurements indicate that the average defect size is larger than a monovacancy. The data presented here contribute to an evolving picture of vacancy point defects in Cd 3 As 2 and can be used to direct future investigation of the defect-transport relationships in this emerging electronic material.

36 MATERIALS SCIENCE↗

In situ measurements of non-equilibrium positron state defects during He irradiation in Si

Radiation-induced property changes in materials originate from the energy transfer from an incoming particle to the existing lattice, displacing atoms. The displaced atoms can cause the formation of extended defects including dislocation loops, voids, or precipitates. The non-equilibrium defects created during damage events determine the extent of these larger defects and are a function of dose rate, material, and temperature. However, these defects are transient and can only be probed indirectly. Herein, we present direct experimental measurements and evidence of irradiated non-equilibrium vacancy formation, where in situ positron annihilation spectroscopy was used to prove the generation of non-equilibrium defects in silicon.

36 MATERIALS SCIENCE↗

A multimodal approach to revisiting oxidation defects in Cr 2 O 3

The oxidation of chromium in air at 700 °C was investigated with a focus on point defect behavior and transport during oxide layer growth. A comprehensive set of characterization techniques targeted characteristics of chromium oxide microstructure and chemical composition analysis. TEM showed that the oxide was thicker with longer oxidation times and that, for the thicker oxides, voids formed at the metal/oxide interface. PAS revealed that the longer the oxidation time, there was an overall reduction in vacancy-type defects, though chromium monovacancies were not found in either case. EIS found that the longer oxidized material was more electrochemically stable and that, while all oxides displayed p-type character, the thicker oxide had an overall lower charge carrier density. Together, the results suggest anion oxygen interstitials and chromium vacancy cluster complexes drive transport in an oxidizing environment at this temperature, providing invaluable insight into the mechanisms that regulate corrosion.

36 MATERIALS SCIENCE↗

Light-driven permanent transition from insulator to conductor

The transition from insulator to conductor can be realized in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a different mechanism the lattice may adopt to induce such a transition. Experiments showed the surprising finding that limited exposure to subband-gap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga 2 O 3 , with a nine orders of magnitude increase in electronic conduction. Furthermore, annealing up to 400 °C did not suppress or decrease the induced conductivity. Photoexcitation by light-induced modification in the charge state of defects and subsequent lattice distortion around them was suggested to be the underlying mechanism behind this transition. Density functional theory calculations confirmed that modifying the charge state of defects leads to redistribution of the localized electrons and massive structural distortion in the surrounding lattice, causing large shifts in the density of states and introducing new states with shallower energy levels. Both experimental and theoretical results revealed the introduction of stable shallow energy levels, explaining the mechanism behind the transition from an insulator to a conductor state by light. We suggest that this mechanism may occur in other wide band-gap metal oxides leading to drastic modification in their electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect Characterization Using Positron Annihilation Spectroscopy on Laser-Ablated Surfaces

In recent years, short, pulsed laser ablation has been gaining popularity for machining small-scale test geometries from bulk samples and for efficient serial sectioning. These laser-based techniques are being added to the toolbox in material science, which makes it necessary to understand the changes in the material that occur from the laser–material interaction. Positron annihilation spectroscopy is a unique, nondestructive technique to investigate small defects in materials difficult to investigate by other tools. In this work, Doppler broadening and positron lifetime annihilation spectroscopy are utilized to help quantify the damage in materials treated with short, pulsed lasers. Using a femtosecond laser on single crystal silicon, this manuscript shows that clusters of vacancy-like defects and small voids increase systematically with laser power. Lastly, the damage induced by the laser can also reach to micrometer depths.

36 MATERIALS SCIENCE↗

Point and extended defects in heteroepitaxial 𝛽−G⁡a 2 ⁢O 3 films

G⁡a 2 ⁢O 3 is emerging as an excellent potential semiconductor for high power and optoelectronic devices. However, the successful development of G⁡a 2⁢ O 3 in a wide range of applications requires a full understanding of the role and nature of its point and extended defects. Here, in this work, high quality epitaxial G⁡a 2 ⁢O 3 films were grown on sapphire substrates by metal-organic chemical vapor deposition and fully characterized in terms of structural, optical, and electrical properties. Then defects in the films were investigated by a combination of depth-resolved Doppler broadening and lifetime of positron annihilation spectroscopies and thermally stimulated emission (TSE). Positron annihilation techniques can provide information about the nature and concentration of defects in the films, while TSE reveals the energy level of defects in the bandgap. Despite very good structural properties, the films exhibit short positron diffusion length, which is an indication of high defect density and long positron lifetime, a sign for the formation of Ga vacancy related defects and large vacancy clusters. These defects act as deep and shallow traps for charge carriers as revealed from TSE, which explains the reason behind the difficulty of developing conductive G⁡a 2 ⁢O 3 films on non-native substrates. Positron lifetime measurements also show nonuniform distribution of vacancy clusters throughout the film depth. Further, the work investigates the modification of defect nature and properties through thermal treatment in various environments. It demonstrates the sensitivity of G⁡a 2 ⁢O 3 microstructures to the growth and thermal treatment environments and the significant effect of modifying defect structure on the bandgap and optical and electrical properties of G⁡a 2 ⁢O 3 .

defects↗

A new mechanism for void-cascade interaction from nondestructive depth-resolved atomic-scale measurements of ion irradiation–induced defects in Fe

The nondestructive investigation of single vacancies and vacancy clusters in ion-irradiated samples requires a depth-resolved probe with atomic sensitivity to defects. The recent development of short-pulsed positron beams provides such a probe. Here, we combine depth-resolved Doppler broadening and positron annihilation lifetime spectroscopies to identify vacancy clusters in ion-irradiated Fe and measure their density as a function of depth. Despite large concentrations of dislocations and voids in the pristine samples, positron annihilation measurements uncovered the structure of vacancy clusters and the change in their size and density with irradiation dose. When combined with transmission electron microscopy measurements, the study demonstrates an association between the increase in the density of small vacancy clusters with irradiation and a remarkable reduction in the size of large voids. This, previously unknown, mechanism for the interaction of cascade damage with voids in ion-irradiated materials is a consequence of the high porosity of the initial microstructure.

36 MATERIALS SCIENCE↗

Measurement and Simulation of Vacancy Formation in 2-MeV Self-irradiated Pure Fe

Positron annihilation spectroscopy is a powerful tool to quantify the amount of vacancies and vacancy clusters in materials. The technique has been utilized to study the induced defects in materials after ion beam and neutron irradiations. Here we make the case for how the technique can and should be utilized to quantify the defects created by irradiation in situ during irradiation to foster a more thorough understanding of the surviving defects after initial collision cascades. This paper outlines a future experimental approach and its meaning for the nuclear materials community, being able to benchmark commonly used rate theory models of damage evolution.

36 MATERIALS SCIENCE↗

Dipole strength distribution in Pb 206 for the evaluation of the neutron capture cross section of Pb 205

The dipole strength distribution of 206 Pb was investigated via a nuclear resonance fluorescence experiment using bremsstrahlung produced with an electron beam at a kinetic energy of 10.5 MeV at the linear accelerator ELBE. We identified 88 states resonantly excited at energies from 3.7 to 8.2 MeV. The analysis of the measured γ-ray spectra includes the quasicontinuum of levels at high energy. Monte Carlo simulation of γ-ray cascades were performed to obtain the intensities of inelastic transitions and branching ratios of the ground-state transitions. The extracted photoabsorption cross section shows enhanced dipole strength at the excitation energies around 5.5 and 7 MeV, which may related to a pygmy dipole resonance. Here, the present (γ,γ') data combined with (γ,n) data from the literature were used for confining input parameters of the statistical calculation code CCONE to derive the neutron-capture cross section of the unstable 205 Pb nucleus.

74 ATOMIC AND MOLECULAR PHYSICS↗

Temperature Quenching in LAB based liquid scintillator

The effect of temperature changes on the light output of LAB based liquid scintillator is investigated in a range from –5 C to 30 °C with a-particles and electrons in a small scale setup. Two PMTs observe the scintillator liquid inside a cylindrically shaped aluminum cuvette that is heated or cooled and the temperature dependent PMT sensitivity is monitored and corrected. The a-emitting isotopes in dissolved radon gas and in natural Samarium (bound to a LAB solution) excite the liquid scintillator mixtures and changes in light output with temperature variation are observed by fitting light output spectra. Furthermore, also changes in light output by compton electrons, which are generated from external calibration g-ray sources, is analysed with varying temperature. Assuming a linear behaviour, a combined negative temperature coefficient of (–0:29 0:01) % /°C is found. Considering hints for a particle type dependency, electrons show (–0:17 0:02) % /°C, whereas the temperature dependency seems stronger for a-particles, with (–0:35 0:03) % /°C. Furthermore, due to a high sampling rate, a pulse shape analysis can be performed and shows an enhanced slow decay component at lower temperatures, pointing to reduced non-radiative triplet state de-excitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗