Engineering topics

Waldman, Ruben Z.

Publications and source records attributed to Waldman, Ruben Z..

5 records

DOE OSTI2024

Pushing the limits of size selectivity in nanoscale solute separations

Transport of a spherical solute through a cylindrical pore has been modelled for decades using well-established hindered transport theory, predicting solutes with a size smaller than the pore to be rejected nonetheless because of convective and diffusive hindrance; this rejection mechanism prevents extremely sharp solute separations by a membrane. Whereas the model has been historically verified, solute transport through near-perfect isoporous membranes may finally overcome this limitation. Here, in this study, encouraging solute rejections are achieved using nanofabricated, defect-free silicon nitride isoporous membranes. The membrane is challenged by a recirculated feed to increase the opportunity for interactions between solutes and the pore array. Results show the membrane completely reject solutes with greater size than the pore size while effectively allowing smaller solutes to permeate through. With effectively increasing the number of interactions, we propose that a steeper size-selective rejection curve may be achieved. With this traditional hurdle overcome, there is new promise for unprecedented membrane separations through judicious process design and extremely tight pore-size distributions.

Gao, Feng↗

DOE OSTI2021

Electronic Conductivity of Nanoporous Indium Oxide Derived from Sequential Infiltration Synthesis

Sequential infiltration synthesis (SIS) is a vapor phase synthetic method that enables the selective nucleation and growth of metal oxides within polymer volumes. The expanding palette of SIS materials and process designs enables tunability of the resulting material properties. We derive porous indium oxide thin films from the SIS of indium oxide using trimethyl indium and H 2 O 2 in polymethyl methacrylate films and observe the strong effect of SIS and post-deposition processing, which affords 7 orders of magnitude of tunability in electrical resistivity. While as-deposited hybrid nanocomposites show no measurable conductivity, high-temperature treatment in O 2 removes the polymer matrix and creates a porous nanocrystalline In 2 O 3 film with resistivities ranging from 10 3 to 10 5 Ω*cm, with lower resistivity correlated to larger grain sizes. Subsequent annealing in H 2 decreases the resistivity of films to less than 10 –2 Ω*cm. A clear correlation between increasing In 2 O 3 volume fraction, grain size, and carrier mobility is observed, which arises from increased percolation pathways, path length, and contact area in nanocrystalline In 2 O 3 films. Furthermore, this wide tunability demonstrates the importance of understanding growth mechanisms and processing conditions for functional materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Maximizing selectivity: An analysis of isoporous membranes

Membranes are compelling candidates for many separation-based industrial processes. However, all synthetic membranes are subject to well-recognized permeability-selectivity trade-offs that hinder their use in advanced applications. Having uniform nanoscale pore size, isoporous nanofiltration and ultrafiltration membranes have attracted wide research interest. However, quantitative analysis of isoporous membrane performance is lacking - particularly at module and system-level scales. In this study, an analytical model is built to investigate how membrane pore-size distribution affects the solute separation efficiency (i.e., rejection and selectivity). The model accounts for convective hindrance as well as concentration polarization and explores effects on separation from the solute-to-pore-size ratio and percent recovery (i.e., fraction of feed flow that passes through the membrane). At the module level, our analysis suggests that a notably sharper rejection vs. solute size curve can be obtained as the pore-size distribution becomes narrower. Additionally, as the recovery increases, the rejection of a solute is maintained at a high level using isoporous membranes while the rejection drops rapidly for membranes that possess a disperse pore-size distribution. Furthermore, in the separation of mixed solutes, isoporous membranes achieve a large selectivity with a modest loss of permeability. Overall, this study elaborates the unique role that isoporous membranes play within the permeability-selectivity trade-off relations and identifies the most exciting opportunities for their future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Resolving the Atomic Structure of Sequential Infiltration Synthesis Derived Inorganic Clusters

Sequential infiltration synthesis (SIS) is a route to the precision deposition of inorganic solids in analogy to atomic layer deposition but occurs within (vs upon) a soft material template. SIS has enabled exquisite nanoscale morphological complexity in various oxides through selective nucleation in block copolymers templates. However, the earliest stages of SIS growth remain unresolved, including the atomic structure of nuclei and the evolution of local coordination environments, before and after polymer template removal. We employed In K-edge extended X-ray absorption fine structure and atomic pair distribution function analysis of high-energy X-ray scattering to unravel (1) the structural evolution of InO x H y clusters inside a poly(methyl methacrylate) (PMMA) host matrix and (2) the formation of porous In 2 O 3 solids (obtained after annealing) as a function of SIS cycle number. Early SIS cycles result in InO x H y cluster growth with high aspect ratio, followed by the formation of a three-dimensional network with additional SIS cycles. That the atomic structures of the InO x H y clusters can be modeled as multinuclear clusters with bonding patterns related to those in In 2 O 3 and In(OH) 3 crystal structures suggests that SIS may be an efficient route to 3D arrays of discrete-atom-number clusters. As a result, annealing the mixed inorganic/polymer films in air removes the PMMA template and consolidates the as-grown clusters into cubic In 2 O 3 nanocrystals with structural details that also depend on SIS cycle number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Polyphenol-Sensitized Atomic Layer Deposition for Membrane Interface Hydrophilization

Improvements in energy-water systems will necessitate fabrication of high-performance separation membranes. To this end, interface engineering is a powerful tool for tailoring properties, and atomic layer deposition (ALD) has recently emerged as a promising and versatile approach. However, most non-polar polymeric membranes are not amenable to ALD processing due to the absence of nucleation sites. Here, a sensitization strategy for ALD-coating is presented, illustrated by membrane interface hydrophilization. Facile dip-coating with polyphenols effectively sensitizes hydrophobic polymer membranes to TiO2 ALD coating. Tannic acid-sensitized ALD-coated membranes exhibit outstanding underwater crude oil repulsion and rigorous mechanical stability through bending and rinsing tests. As a result, these membranes demonstrate outstanding crude oil-in-water separation and reusability compared to untreated membranes or those treated with ALD without polyphenol pretreatment. A possible polyphenol-sensitized ALD mechanism is proposed involving initial island nucleation followed by film intergrowth. This polyphenol sensitization strategy enriches the functionalization toolbox in material science, interface engineering, and environmental science.

36 MATERIALS SCIENCE↗