VERAIn User's Manual 4.4
Explore the source record for details and available documents.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Engineering topics
Walker, Erik
Publications and source records attributed to Walker, Erik.
SCALE Modeling of the Sodium Cooled Fast-Spectrum Advanced Burner Test Reactor
This report documents the modeling and simulation of a sodium-cooled fast reactor (SFR) as part of a U.S. Nuclear Regulatory Commission–sponsored project to assess the modeling and simulation capabilities for accident progression, source term, and consequence analysis for advanced reactor technologies with the Oak Ridge National Laboratory code SCALE and the Sandia National Laboratories (SNL) code MELCOR. Based on publicly available benchmark specifications, a fully heterogeneous 3D SCALE model of the 250 MWth Advanced Burner Test Reactor (ABTR) was developed to demonstrate SCALE’s capabilities for full-core reactivity analysis, fuel inventory prediction, and decay heat analysis of an SFR. The benchmark specifications contain modeling details for the ABTR core at the beginning of equilibrium cycle (BOEC) at operating conditions; they were derived from a 2006 preconceptual design report produced by Argonne National Laboratory. The ABTR was designed to demonstrate reactor-based transmutation of transuranics, that is, to “burn” transuranics recovered from light-water reactor (LWR) spent fuel. The ABTR’s fuel is designed to operate in 4 month cycles using uranium/transuranic (U/TRU) metallic fuel, with a TRU content of approximately 20%, at a conversion ratio of approximately 0.6. Various reactivity calculations were performed with SCALE for the ABTR and, where possible, compared with results available in the open literature. Additionally, SCALE was used to perform a full-core depletion calculation over the 4 month cycle to obtain the nuclide inventory at the end of equilibrium cycle (EOEC). These nuclide inventories, decay heat, power profiles, and reactivity feedback coefficients at EOEC represent the initial conditions for analyzing severe accident scenarios with MELCOR.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Insert Modeling in UNF ST&DARDS
The Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS) is a software tool that integrates a used nuclear fuel (UNF) or spent nuclear fuel (SNF) relational database and key analysis capabilities to simplify and automate numerous UNF management and fuel cycle–related activities. UNF-ST&DARDS is being developed for the US Department of Energy’s Office of Nuclear Energy Spent Fuel and Waste Disposition program. UNF-ST&DARDS provides an integrated framework that uses advanced modeling and simulation to predict the behavior of SNF over the timescales associated with permanent disposal in a geologic repository. After leaving the spent fuel pool, SNF is transferred to dry storage in a dual-purpose canister (DPC). DPCs are considered “dual purpose” because they are designed for both storage and transportation, removing the need to transfer the fuel to a separate transportation cask. However, much research has been conducted investigating the feasibility of directly disposing of DPCs in geologic repositories. Direct disposal of DPCs could reduce worker exposure during repackaging, reducing the amount of low-level waste from the discarded DPCs and potentially saving billions of dollars. Therefore, direct disposal of as-loaded DPCs is desirable if it can be done safely.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
VERA 4.3 Release Notes
Explore the source record for details and available documents.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
VERAIn User's Manual
Explore the source record for details and available documents.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗