Search NASA⌕ Search

Engineering topics

Wallace, G M

Publications and source records attributed to Wallace, G M.

Lower hybrid current drive at high density in the multi-pass regime

Assessing the performance of lower hybrid current drive (LHCD) at high density is critical for developing non-inductive current drive systems on future steady-state experiments. Excellent LHCD efficiency has been observed during fully non-inductive operation ({eta}=2.0-2.5 Multiplication-Sign 10{sup 19} AW{sup -1}m{sup -2} at n{sub e}=0.5 Multiplication-Sign 10{sup 20} m{sup -3}) on Alcator C-Mod [I. H. Hutchinson et al., Phys. Plasmas 1, 1511 (1994)] under conditions (n{sub e}, magnetic field and topology, and LHCD frequency) relevant to ITER [S. Shiraiwa et al., Nucl. Fusion 51, 103024 (2011)]. To extend these results to advanced tokamak regimes with higher bootstrap current fractions on C-Mod, it is necessary to increase n{sub e} to 1.0-1.5 Multiplication-Sign 10{sup 20} m{sup -3}. However, the number of current-carrying, non-thermal electrons generated by LHCD drops sharply in diverted configurations at densities that are well below the density limit previously observed on limited tokamaks. In these cases, changes in scrape off layer (SOL) ionization and density profiles are observed during LHCD, indicating that significant power is transferred from the LH waves to the SOL. Fokker-Planck simulations of these discharges utilizing ray tracing and full wave propagation codes indicate that LH waves in the high density, multi-pass absorption regime linger in the plasma edge, and SOL region, where absorption near or outside the LCFS results in the loss of current drive efficiency. Modeling predicts that non-thermal emission increases with stronger single-pass absorption. Experimental data show that increasing T{sub e} in high density LH discharges results in higher non-thermal electron emission, as predicted by the models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower Hybrid Wave Induced SOL Emissivity Variation at High Density on the Alcator C-Mod Tokamak

Lower Hybrid Current Drive (LHCD) in the Alcator C-Mod tokamak provides current profile control for the generation of Advanced Tokamak (AT) plasmas. Non-thermal electron bremsstrahlung emission decreases dramatically at n-bar{sub e}>1{center_dot}10{sup 20}[m{sup -3}] for diverted discharges, indicating low current drive efficiency. It is suggested that Scrape-Off-Layer (SOL) collisional absorption of LH waves is the cause for the absence of non-thermal electrons at high density. VUV and visible spectroscopy in the SOL provide direct information on collision excitation processes. Deuterium Balmer-, Lyman- and He-I transition emission measurements were used for initial characterization of SOL electron-neutral collisional absorption. Data from Helium and Deuterium LHCD discharges were characterized by an overall increase in the emissivity as well as an outward radial shift in the emissivity profile with increasing plasma density and applied LHCD power. High-temperature, high-field (T{sub e} = 5keV,B{sub t} = 8T) helium discharges at high density display increased non-thermal signatures as well as reduced SOL emissivity. Variations in emissivity due to LHCD were seen in SOL regions not magnetically connected to the LH Launcher, indicating global SOL effects due to LHCD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower hybrid current drive in a high density diverted tokamak

Experimental observations of LHCD at high density (n-bar{sub e}>10{sup 20}m{approx}{sup 3}) on the Alcator C-Mod tokamak are presented in this paper. Bremsstrahlung emission from relativistic fast electrons in the core plasma drops sharply in single null discharges well below the density limit previously observed on limited tokamaks ({omega}/{omega}{sub LH}{approx}2). Modeling and experimental evidence suggest that the absence of LH driven fast electrons at high density may be due to collisional absorption in the scrape off layer. Experiments show that the expected current drive density dependence is recovered for inner wall limited discharges across the range of densities scanned (0.5x10{sup 20} m{sup -3}<n-bar{sub e}<1.5x10{sup 20} m{sup -3}). Increasing T{sub e} in the periphery of the plasma (0.8<r/a<1.0) also results in a modest increase in non-thermal electron emission at high n-bar{sub e}. Ray tracing/Fokker-Planck simulations of these discharges predict the observed sensitivity to plasma position when the effects of collisional absorption in the SOL are included in the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in LHCD modeling and experiments towards the AT regime on Alcator C-Mod

Electron internal transport barrier (ITB) formation is observed during fully non-inductive LHCD discharges on Alcator C-Mod. The formation is characterized by an abrupt increase of the central electron temperature after a few current penetration time has passed following LHCD turn-on. The ITB phase is often terminated by m = 2 mode activity. Kinetic equilibrium reconstruction and TRANSP/LSC analysis show shear reversal in the q profile during the ITB phase. TRANSP/LSC predictive analysis suggests that f{sub Bs}{approx}60% is possible if a similar temperature gradient is maintained at r/a{approx}0.5 with H-factor of 1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of Co and Counter Rotation Produced by Lower Hybrid Waves in Alcator C-Mod

Lower hybrid waves launched uni-directionally into tokamak plasmas impart momentum to the electrons. This momentum can be transferred to the ions, leading to substantial counter current rotation. Observations of LH-induced counter rotation have been previously reported [1], and the initial rate of increase has been found to be consistent with the calculated rate of wave momentum injection [2]. However, in recent experiments in Alcator C-Mod it has been found that application of LH waves to relatively low current (I{sub p}{approx}0.4-0.6 MA) plasmas can result in a co-current change of rotation, which implies a different mechanism than that described above. This appears to be linked to the so-called intrinsic rotation commonly observed in Alcator C-Mod and other tokamaks [3]. In addition to the change in direction at low current, some dependence on the magnetic configuration (USL vs. LSN) has been observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Absorption of lower hybrid waves in the scrape off layer of a diverted tokamak

The goal of the Lower Hybrid Current Drive (LHCD) system on the Alcator C-Mod tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994)] is to investigate current profile control under plasma conditions relevant to future tokamak experiments. Experimental observations of a LHCD ''density limit'' for C-Mod are presented in this paper. Bremsstrahlung emission from relativistic fast electrons in the core plasma drops suddenly above line averaged densities of 10{sup 20} m{sup -3} ({omega}/{omega}{sub LH{approx}}3-4), well below the density limit previously observed on other experiments ({omega}/{omega}{sub LH{approx}}2). Electric currents flowing through the scrape off layer (SOL) between the inner and outer divertors increase dramatically across the same density range that the core bremsstrahlung emission drops precipitously. These experimental x-ray data are compared to both conventional modeling, which gives poor agreement with experiment above the density limit and a model including collisional absorption in the SOL, which dramatically improves agreement with experiment above the observed density limit. These results show that strong absorption of LH waves in the SOL is possible on a high density tokamak and the SOL must be included in simulations of LHCD at high density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of Internal Profiles via LHCD on Alcator C-Mod

LHCD on Alcator C-Mod is being used in plasmas with parameters similar to those expected on ITER for the purpose of tailoring the plasma current profile. LHCD experiments have also produced intriguing results related to momentum transport and edge pedestal physics that affect the toroidal rotation profile and the temperature and density profiles. Quantitative comparisons between local measurements and theory/simulation have been performed, confirming the off-axis localization of the current drive, as well as its magnitude and location dependence on the launched n{sub parallel} spectrum and electron temperature. Applying LHCD during the current ramp saves volt-seconds and delays the peaking of the current profile. Counter current toroidal rotation during LHCD has been observed in both L and H-mode plasmas. In H-mode plasmas the edge pedestal collisionality is reduced while the overall pressure in the pedestal increases slightly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of Lower Hybrid Wave Absorption in the Scrape Off Layer of a Diverted Tokamak

The Lower Hybrid Current Drive (LHCD) system on Alcator C-Mod is designed to drive off-axis current in the core plasma, e.g. r/a{<=}0.8, however several interesting observations indicate that the LH waves are depositing significant power in the Scrape Off Layer (SOL) in high density L-Mode discharges. These phenomena are observed in accessible plasmas below the so-called 'density limit' attributed to Parametric Decay Instabilities as {omega}{yields}2{omega}{sub lh}. Parallel current densities of {approx}500 kA/m{sup 2} are measured on divertor Langmuir probes located just outside the separatrix during high power LH operation above n-bar{sub e}{approx}1x10{sup 20} m{sup -3}. These SOL currents rise at the same density at which the line integrated hard X-ray Bremsstrahlung emission drops sharply. Ray tracing/Fokker-Planck simulations over-estimate the line integrated X-ray emissivity by a factor of {approx}500 at n-bar{sub e} = 1.4 10{sup 20} m{sup -3} as compared to a factor of 3-4 at n-bar{sub e} = 0.6x10{sup 20} m. Ray tracing simulations including a realistic SOL show similar trends in X-ray emission compared with the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scrape-off layer reflectometer for Alcator C-Mod

A two-frequency x-mode reflectometer operating from 100 to 146 GHz is deployed on Alcator C-Mod to measure the density profile and fluctuations in the scrape-off layer (SOL) immediately in front of the new J-port ICRF antenna and the new C-port lower hybrid launcher. The reflectometer covers densities from 10{sup 16} to 10{sup 20} m{sup -3} at 5-5.4 T. To provide the greatest flexibility and capability to deal with density fluctuations approaching 100% peak-to-peak in the SOL, both full-phase and differential-phase measurement capabilities with sweep speeds of {approx}10 {mu}s to >1 ms are implemented. The differential-phase measurement uses a difference frequency of 500 MHz, corresponding to cutoff layer separations ranging from about 0.1 to 1 mm. The reflectometer has six sets of launchers: three on the ICRF antenna and three on the lower hybrid launcher. Both the ICRF antenna and the lower hybrid launcher incorporate reflectometer antennas at their top, bottom, and midplane locations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗