Search NASA⌕ Search

Engineering topics

Wallace, Robert

Publications and source records attributed to Wallace, Robert.

At least 19 records

BSM (Bioenergy Scenario Model) 2023 FKA: Biomass Scenario Model [SWR-09-09]

The U.S. Department of Energy's (DOE's) Bioenergy Technologies Office and the National Renewable Energy Laboratory (NREL) developed the BSM (Bioenergy Scenario model) to explore the development of a U.S. biofuels industry. The BSM is a system dynamics model built on the STELLA software platform. The model represents the dynamic interactions of the major sectors of the biofuels industry—feedstock production, feedstock logistics, biomass to biofuels conversion, and biofuels end use, including fuels inventory, dispensing, distribution, fuel use, and the vehicle fleet. The BSM represents contextual aspects of the developing biofuels industry, including investment in new biomass to biofuel conversion technologies, competition from petroleum fuels, vehicle demand for biofuels, and various government policies, using all of these to simulate the development of the industry. The purpose of the BSM is to generate and explore plausible scenarios for the evolution of a biofuels industry in the United States, and as a high-level system model it is not designed for precise, quantitative forecasting. Instead, it is best used to (1) analyze and evaluate alternate policies; (2) generate scenarios; (3) identify high-impact levers and bottlenecks to system evolution; and (4) seed focused discussion among policymakers, analysts, and stakeholders.

Bush, Brian↗

Strategies for Achieving the DOE Hydrogen Shot Goal: Thermal Conversion Approaches

In July 2021 the United States (U.S.) Department of Energy (DOE) launched the first of a series of Department-wide Energy Earthshot goals designed to accelerate breakthroughs of more abundant, affordable, and reliable clean energy solutions within the decade. The Hydrogen Shot goal seeks to reduce the cost of clean hydrogen to $\$$1 per 1 kilogram in 1 decade ("1 1 1"). Today, thermal conversion of fossil fuels represents the predominant, lowest cost method of hydrogen production. In 2020 approximately 75 percent of global, dedicated hydrogen production was produced via fossil fuels using thermal conversion approaches such as steam reforming and gasification. However, carbon management techniques such as CO 2 capture and sequestration (CCS) and pyrolysis are not widely represented in the current fossil-based hydrogen production fleet. Lowering the cost of clean hydrogen production from commercial and advanced thermal conversion-based technologies is critical for successfully achieving the Hydrogen Shot goal. This report presents the findings from an initial screening analysis of several scenarios that explore cost drivers related to clean hydrogen production. The screening encompasses commercially available and developing thermal conversion technology alternatives as well as factors exogenous to the plant such as feedstock/byproduct pricing, CO 2 pipeline and storage infrastructure costs, and scale to assess potential pathways towards meeting the Hydrogen Shot goal. Additionally, this report presents initial Research and Development (R&D) strategies to advance thermal conversion technology towards meeting the Hydrogen Shot goal.

08 HYDROGEN↗

Appalachian Hydrogen Infrastructure Analysis

As large-scale efforts to decarbonize the global economy ramp up in earnest, hydrogen is being positioned as a critical solution for numerous sectors. Hydrogen produced from fossil energy resources with carbon capture and storage (CCS) is viewed as a bridge in the clean energy transition, enabling the development of midstream infrastructure and downstream demand. This report highlights the potential for the Appalachian region to develop a hydrogen economy with fossil-derived hydrogen with CCS production (hydrogen from natural gas with carbon capture and storage). Specifically, the report provides hydrogen transport and storage infrastructure pathways in support of a broader hydrogen economy. These pathways are consistent with existing and potential technologies and regulations and provide valuable guidance for the investment and research and development potential for transportation and storage of hydrogen in Appalachia.

08 HYDROGEN↗

2021 Summer Resource Adequacy in the ERCOT Region

This report is an update to the NETL report on the same topic that examined the potential system performance of the Electric Reliability Council of Texas (ERCOT) system during the summer of 2020. Anticipated reserve margins in ERCOT have risen year-over-year from the 10.7 percent reported in ERCOT’s Final Seasonal Assessment of Resource Adequacy (SARA) for Summer 2020 to 15.7 percent for Summer 2021 in ERCOT’s Capacity, Demand and Reserves [CDR] report published in December 2020 and 2021 Summer Preliminary SARA published in March 2021. Using data from ERCOT’s 2021 Summer SARA, CDR, and historical performance data, six economic dispatch scenarios using PROMOD were developed to assess the risk to ERCOT of a load shedding event for Summer 2021. The results suggest that ERCOT could make it through the summer season without a loss of load event, as long as the weather remains normal. However, through a combination of scenarios, including increased demand, increased forced outages, and low wind output, ERCOT is likely to find itself operating in emergency conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Power Market Primers

The National Energy Technology Laboratory (NETL) has developed a series of primers on independent system operators (ISOs) and regional transmission organizations (RTOs). The primers primarily explore the history, workings, and types of electricity markets composing the seven ISOs/RTOs in the United States (U.S.) (Exhibit 1-1). The primer series includes sixteen documents. A general introduction to ISOs/RTOs is given in Independent System Operators and Regional Transmission Organizations. Specific details about the seven existing ISOs/RTOs in the United States are given in seven additional primers: California Independent System Operator, ERCOT Independent System Operator, ISO New England Regional Transmission Operator, MISO Regional Transmission Operator, New York Independent System Operator, PJM Regional Transmission Operator, and Southwest Power Pool, Inc. These primers provide a history of each ISO/RTO, short explanations of products and services (different types of electricity markets) offered by ISO/RTO, and the ISO/RTO generation mix. Readers who are not familiar with the different types of markets and their mechanisms can find basic information in six additional primers titled: Power Markets, Energy Market, Capacity Market, Comparisons of Different ISO/RTO Capacity Market Structures, Ancillary Services, and Financial Transmission Rights. Additionally, the primer North American Electric Reliability Corporation introduces the electric reliability organization, which is responsible for reliability of the bulk power system and Federal Energy Regulatory Commission introduces the federal commission responsible for overseeing the nation's electric power markets and related energy and financial markets and issuing market related rules and regulations. All the primers are very short and concise documents. They are accompanied by a Glossary of Terms in which many of the technical terms used in these primers are defined.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A roadmap for electronic grade 2D materials

Since their modern debut in 2004, 2-dimensional (2D) materials continue to exhibit scientific and industrial promise, providing a broad materials platform for scientific investigation, and development of nano- and atomic-scale devices. A significant focus of the last decade's research in this field has been 2D semiconductors, whose electronic properties can be tuned through manipulation of dimensionality, substrate engineering, strain, and doping. Molybdenum disulfide (MoS 2 ) and tungsten diselenide (WSe 2 ) have dominated recent interest for potential integration in electronic technologies, due to their intrinsic and tunable properties, atomic-scale thicknesses, and relative ease of stacking to create new and custom structures. Yet, to go 'beyond the bench', advances in large-scale, 2D layer synthesis and engineering must lead to 'exfoliation-quality' 2D layers at the wafer scale. This roadmap aims to address this grand challenge by identifying key technology drivers where 2D layers can have an impact, and to discuss synthesis and layer engineering for the realization of electronic-grade, 2D materials. We center on three fundamental areas of research that must be heavily pursued in both experiment and computation to achieve high-quality materials for electronic and optoelectronic applications.

36 MATERIALS SCIENCE↗

BSM (Bioenergy Scenario Model) FKA: Biomass Scenario Model [SWR-09-09]

The U.S. Department of Energy's Bioenergy Technologies Office and the National Renewable Energy Laboratory (NREL) developed the BSM (Bioenergy Scenario Model) to explore the development of a U.S. biofuels industry. The BSM is a system dynamics model built on the STELLA software platform. The model represents the dynamic interactions of the major sectors of the biofuels industry—feedstock production, feedstock logistics, biomass to biofuels conversion, and biofuels end use, including fuels inventory, dispensing, distribution, fuel use, and the vehicle fleet. The BSM represents contextual aspects of the developing biofuels industry, including investment in new biomass to biofuel conversion technologies, competition from petroleum fuels, vehicle demand for biofuels, and various government policies, using all of these to simulate the development of the industry. The purpose of the BSM is to generate and explore plausible scenarios for the evolution of a biofuels industry in the United States, and as a high-level system model it is not designed for precise, quantitative forecasting. Instead, it is best used to (1) analyze and evaluate alternate policies; (2) generate scenarios; (3) identify high-impact levers and bottlenecks to system evolution; and (4) seed focused discussion among policymakers, analysts, and stakeholders.

Bush, Brian↗

ISO New England Dual Fuel Capabilities to Limit Natural Gas and Electricity Interdependencies

This report examines technical, regulatory, and market issues associated with operating power plants primarily fueled with natural gas, on a secondary fuel, such as fuel oil or liquefied natural gas (LNG). In addition, a regional case study was completed to identify the current and near-term potential for dual fuel operation in New England, along with a market impact analysis of potential cost savings during an extreme weather event. The New England Independent System Operator (ISO-NE) was selected as the study area based on a preponderance of natural gas-fired generators contributing to the regional generating capacity mix (nearly 50 percent natural gas), limited natural gas supply infrastructure, and the potential for natural gas delivery disruptions due to cold weather events, exacerbated by the lack of bulk natural gas storage in the region.

03 NATURAL GAS↗

Geometric validation of self-gating k-space-sorted 4D-MRI vs 4D-CT using a respiratory motion phantom

Purpose: MRI is increasingly being used for radiotherapy planning, simulation, and in-treatment-room motion monitoring. To provide more detailed temporal and spatial MR data for these tasks, we have recently developed a novel self-gated (SG) MRI technique with advantage of k-space phase sorting, high isotropic spatial resolution, and high temporal resolution. The current work describes the validation of this 4D-MRI technique using a MRI- and CT-compatible respiratory motion phantom and comparison to 4D-CT. Methods: The 4D-MRI sequence is based on a spoiled gradient echo-based 3D projection reconstruction sequence with self-gating for 4D-MRI at 3 T. Respiratory phase is resolved by using SG k-space lines as the motion surrogate. 4D-MRI images are reconstructed into ten temporal bins with spatial resolution 1.56 × 1.56 × 1.56 mm{sup 3}. A MRI-CT compatible phantom was designed to validate the performance of the 4D-MRI sequence and 4D-CT imaging. A spherical target (diameter 23 mm, volume 6.37 ml) filled with high-concentration gadolinium (Gd) gel is embedded into a plastic box (35 × 40 × 63 mm{sup 3}) and stabilized with low-concentration Gd gel. The phantom, driven by an air pump, is able to produce human-type breathing patterns between 4 and 30 respiratory cycles/min. 4D-CT of the phantom has been acquired in cine mode, and reconstructed into ten phases with slice thickness 1.25 mm. The 4D images sets were imported into a treatment planning software for target contouring. The geometrical accuracy of the 4D MRI and CT images has been quantified using target volume, flattening, and eccentricity. The target motion was measured by tracking the centroids of the spheres in each individual phase. Motion ground-truth was obtained from input signals and real-time video recordings. Results: The dynamic phantom has been operated in four respiratory rate (RR) settings, 6, 10, 15, and 20/min, and was scanned with 4D-MRI and 4D-CT. 4D-CT images have target-stretching, partial-missing, and other motion artifacts in various phases, whereas the 4D-MRI images are visually free of those artifacts. Volume percentage difference for the 6.37 ml target ranged from 5.3% ± 4.3% to 10.3% ± 5.9% for 4D-CT, and 1.47 ± 0.52 to 2.12 ± 1.60 for 4D-MRI. With an increase of respiratory rate, the target volumetric and geometric deviations increase for 4D-CT images while remaining stable for the 4D-MRI images. Target motion amplitude errors at different RRs were measured with a range of 0.66–1.25 mm for 4D-CT and 0.2–0.42 mm for 4D-MRI. The results of Mann–Whitney tests indicated that 4D-MRI significantly outperforms 4D-CT in phase-based target volumetric (p = 0.027) and geometric (p < 0.001) measures. Both modalities achieve equivalent accuracy in measuring motion amplitude (p = 0.828). Conclusions: The k-space self-gated 4D-MRI technique provides a robust method for accurately imaging phase-based target motion and geometry. Compared to 4D-CT, the current 4D-MRI technique demonstrates superior spatiotemporal resolution, and robust resistance to motion artifacts caused by fast target motion and irregular breathing patterns. The technique can be used extensively in abdominal targeting, motion gating, and toward implementing MRI-based adaptive radiotherapy.

60 APPLIED LIFE SCIENCES↗

Profile of Resource Adequacy in the MISO Region

MISO is facing a number of generation resource challenges, ranging from large amounts of retirements, behind schedule retrofit projects, and internal resources committed to exporting power to PJM's capacity market. This report identifies potential issues with generator retirements and retrofits, as well as potential transmission issues, including the impact of imports and exports in a short-term outlook for resource adequacy in the MISO region, including specific concerns with the generation capacity expected to be available in the MISO North and Central regions from 2014 to 2016, as well as additional risks from proposed environmental regulations.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Coal Fleet Transition: Retirement Impacts in the Eastern Interconnection

This report examines the impact of announced retirements on the mix of available generating capacity, prices, resource availability, and air emissions in the Eastern Interconnection. The report uses a security constrained economic dispatch (SCED) model - Ventyx's PROMOD IV 11.1 - of the bulk electric system (BES) to model the interconnection.

01 COAL, LIGNITE, AND PEAT↗

Issue Paper: Electricity System Adequacy - Challenges Facing the Nuclear Power Industry

One in a series of Issue Papers addressing Electricity System Adequacy, this report focuses on Challenges Facing the Nuclear Power Industry. Early proclamations of a nuclear renaissance yield to predictions of the industry's decline, while proposed carbon regulations offer potential optimism to use nuclear as a clean energy source. Yet, nuclear plants are currently 'at-risk' of early retirement (for economic reasons) due to electricity market design issues and competition with low priced natural gas. Concerns are identified as baseload generation shifts from coal and nuclear to increasing natural gas and renewables which may impact on the reliability of the power system.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Review of the CO 2 Pipeline Infrastructure in the U.S.

This report provides an overview of the state of CO 2 pipeline infrastructure, both the existing and the current planned expansion based on industry announcements. In addition, EP-NEMS, a modified version of EIA's 2014 NEMS model, was used to run three cases in order to provide a snapshot of potential CO 2 pipeline expansion under various carbon policy scenarios. The three scenarios studied were a reference case, an extended policies case (Cap40), and a carbon price case (CP25). The report also contains an overview of the current permitting, regulations, and policies involved with CO 2 pipeline infrastructure.

03 NATURAL GAS↗

Subsurface Sources of CO 2 in the United States. Volume II: Exploration of CO 2 Systems

A study of the genesis and tectonic setting of subsurface CO 2 systems in the United States indicates that undiscovered CO 2 reservoirs could contribute materially to CO 2 supply for enhanced oil recovery. Five geographic areas are estimated to contain 42 Tcf of risked technically recoverable CO 2 resource (TRR). Two lead areas near the Permian Basin, Val Verde and San Juan, contain 34 Tcf CO 2 risked TRR, an amount roughly equivalent to the remaining TRR in discovered reservoirs that are currently supplying the region. The number of lead areas studied was limited and the aggregate TRR estimates are not comprehensive.

03 NATURAL GAS↗

Subsurface Sources of CO 2 in the Contiguous United States. Volume 1: Discovered Reservoirs

Twenty-one CO 2 fields in the contiguous states contain an estimated 311 Tcf of CO 2 gas-initially-in-place (GIIP). Of that, 168 Tcf (54 percent) is estimated to be accessible and technically recoverable. The estimated economically recoverable resource (ERR) is 96.4 Tcf, based on a CO 2 price of 1.06 $/mcf ($20/tonne) at the field gate. Cumulative production to date is 18.9 Tcf, leaving 77.5 Tcf remaining or net ERR. The Big Piney-LaBarge field in Wyoming contains an estimated net ERR of 52 Tcf, 67 percent of the total for the United States. The remaining ERR in reservoirs that feed into the Permian Basin and Gulf Coast is on the order of 10-20 years of supply.

03 NATURAL GAS↗

As-Received, Ozone Cleaned and Ar+ Sputtered Surfaces of Hafnium Oxide Grown by Atomic Layer Deposition and Studied by XPS

In this study, X-ray photoelectron spectroscopy (XPS) characterization was performed on 47 nm thick hafnium oxide (HfO{sub 2}) films grown by atomic layer deposition using TEMA-Hf/H{sub 2}O at 250 C substrate temperature. HfO{sub 2} is currently being studied as a possible replacement for Silicon Oxide (SiO{sub 2}) as a gate dielectric in electronics transistors. XPS spectra were collected on a Physical Electronics Quantum 2000 Scanning ESCA Microprobe using a monochromatic Al K{sub a} X-ray (1486.7 eV) excitation source. The sample was analyzed under the following conditions: as received, after UV irradiation for five minutes, and after sputter cleaning with 2 kV Ar{sup +} ions for 180 seconds. Survey scans showed carbon, oxygen, and hafnium as the major species in the film, while the only minor species of argon and carbide was detected after sputtering. Adventitious carbon initially composed approximately 18.6 AT% of the surface, but after UV cleaning it was reduced to 2.4 AT%. This demonstrated that that the majority of carbon was due to adventitious carbon. However, after 2 kV Ar{sup +} sputtering there was still only trace amounts of carbon at {approx}1 AT%, Some of this trace carbon is now in the form of a carbide due to the interaction with Ar{sup +} used for sputter cleaning. Furthermore, the stoiciometric ratio of oxygen and hafnium is consistent with a high quality HfO{sub 2} film.

36 MATERIALS SCIENCE↗

Comparison of the sputter rates of oxide films relative to the sputter rate of SiO{sub 2}

There is a growing interest in knowing the sputter rates for a wide variety of oxides because of their increasing technological importance in many different applications. To support the needs of users of the Environmental Molecular Sciences Laboratory, a national scientific user facility, as well as our research programs, the authors made a series of measurements of the sputter rates from oxide films that have been grown by oxygen plasma-assisted molecular beam epitaxy, pulsed laser deposition, atomic layer deposition, electrochemical oxidation, or sputter deposition. The sputter rates for these oxide films were determined in comparison with those from thermally grown SiO{sub 2}, a common reference material for sputter rate determination. The film thicknesses and densities for most of these oxide films were measured using x-ray reflectivity. These oxide films were mounted in an x-ray photoelectron or Auger electron spectrometer for sputter rate measurements using argon ion sputtering. Although the primary objective of this work was to determine relative sputter rates at a fixed angle, the measurements also examined (i) the angle dependence of the relative sputter rates, (ii) the energy dependence of the relative sputter rates, and (iii) the extent of ion beam induced reduction for some oxides. Oxide films examined include SiO{sub 2}, Al{sub 2}O{sub 3}, CeO{sub 2}, Cr{sub 2}O{sub 3}, Fe{sub 2}O{sub 3}, HfO{sub 2}, In-Sn oxide, Ta{sub 2}O{sub 5}, TiO{sub 2} (anatase, rutile, and amorphous), and ZnO. The authors found that the sputter rates for the oxides can vary up to a factor of 2 (usually lower) from that observed for SiO{sub 2}. The ratios of sputter rates relative to those of SiO{sub 2} appear to be relatively independent of ion beam energy in the range of 1-4 kV and for incident angles <50 deg. As expected, the extent of ion beam induced reduction of the oxides varies with the sputter angle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗