Engineering topics

Walls, D. M.

Publications and source records attributed to Walls, D. M..

4 records

NASA NTRS1976

Tests and comparisons of satellite-derived geoids with Skylab altimeter data

During the Skylab 4 mission, the S-193 radar altimeter was operated nearly continuously for a revolution around the world on Jan. 31, 1974. This direct measurement to the sea surface has provided an independent basis for the evaluation of the precision of global geoids computed from satellite-derived earth gravity models. This paper presents comparisons between the Skylab data and several recent gravity models published by Goddard Space Flight Center, the Smithsonian Astrophysical Observatory, and the National Oceanic and Atmospheric Administration. The differences between the altimeter geoid and the satellite geoids were as large as 20 m, rms values ranging from 8 to 10 m. These differences also indicated a systematic long-wavelength variation (about 100 deg) not related to error in the Skylab orbits. Truncation of the models to degree and order 8 did not eliminate the long-wavelength variation, but in every case the rms agreement between the satellite geoids and the altimeter geoid was slightly improved. Orbits computed with the truncated models were found to be inferior to those computed with the complete models.

Marsh, J. G.↗

NASA NTRS1975

Tests and comparisons of satellite derived geoids with Skylab altimeter data

The SKYLAB-193 radar altimeter was operated nearly continuously around the world on January 31, 1974. This direct measurement of the sea surface topography provided an independent basis for the evaluation of global geoids computed from satellite derived gravity models. The differences between the altimeter geoid and the satellite geoids were as large as 25 meters with rms values ranging from 8 to 10 meters. These differences also indicated a systematic long wavelength variation (approximately 100 deg) not related to error in the SKYLAB orbits. Truncation of the models to degree and order eight did not eliminate the long wavelength variation, but in every case the rms agreement between satellite and altimeter geoids was improved. Orbits computed with the truncated models were in contrast found to be inferior to those computed using the complete models.

Marsh, J. G.↗

NASA NTRS1974

Station coordinates for GEOS-C altimeter calibration and experimentation

Station coordinates are given for the C-band radar GEOS-C altimeter calibration sites at Bermuda, Merritt, Grand Turk, and Wallops Islands. The coordinates were estimated in a multi-arc dynamic solution using GEOS-2 C-band radar and laser ranges with a priori information from the GSFC-1973 station coordinate solution. Comparisons with other solutions suggest a relative uncertainty of a few meters in each coordinate. Data reductions show that station coordinates of this quality can introduce a rapidly changing error into the altitude of a satellite whose orbit is determined from calibration area data alone. In contrast, global tracking constrains the orbit and results in slowly varying satellite position error.

Marsh, J. G.↗

NASA NTRS1974

Geodetic results from ISAGEX data

Laser and camera data taken during the International Satellite Geodesy Experiment (ISAGEX) were used in dynamical solutions to obtain center-of-mass coordinates for the Astro-Soviet camera sites at Helwan, Egypt, and Oulan Bator, Mongolia, as well as the East European camera sites at Potsdam, German Democratic Republic, and Ondrejov, Czechoslovakia. The results are accurate to about 20m in each coordinate. The orbit of PEOLE (i=15) was also determined from ISAGEX data. Mean Kepler elements suitable for geodynamic investigations are presented.

Marsh, J. G.↗