Engineering topics

Walton, William C., Jr.

Publications and source records attributed to Walton, William C., Jr..

3 records

NASA NTRS1961

An Investigation of the Natural Frequencies and Mode Shapes of Liquids in Oblate Spheroidal Tanks

An experimental investigation was conducted to gain some understanding of the character of the free vibration modes of liquids In oblate spheroidal tanks applicable in missile and space vehicle systems, Measured natural frequencies were obtained for the lowest three or four, antisymmetric modes of oscillation as a function of the liquid depth for three orientations of each of several such tanks of different size and oblateness. The orientations considered were such that: (a) the equator of the spheroid was horizontal and oscillations were along a diameter of the circular liquid surface; (b) the equator of the spheroid was vertical and the oscillations were along the minor axis of the elliptical liquid surface; and (c) the equator of the spheroid was vertical and the oscillations were along the major axis of the elliptical liquid surface; The frequency data are presented as dimensionless parameters developed for each orientation to permit the application of the experimental results to the prediction of the natural frequencies of tanks of different size and oblateness. Photographs we re made of representative surface wave or mode, shapes for each orientation.

Leonard, H. Wayne↗

NASA NTRS1960

Applications of a General Finite-Difference Method for Calculating Bending Deformations of Solid Plates

This paper reports the findings of an investigation of a finite - difference method directly applicable to calculating static or simple harmonic flexures of solid plates and potentially useful in other problems of structural analysis. The method, which was proposed in doctoral thesis by John C. Houbolt, is based on linear theory and incorporates the principle of minimum potential energy. Full realization of its advantages requires use of high-speed computing equipment. After a review of Houbolt's method, results of some applications are presented and discussed. The applications consisted of calculations of the natural modes and frequencies of several uniform-thickness cantilever plates and, as a special case of interest, calculations of the modes and frequencies of the uniform free-free beam. Computed frequencies and nodal patterns for the first five or six modes of each plate are compared with existing experiments, and those for one plate are compared with another approximate theory. Beam computations are compared with exact theory. On the basis of the comparisons it is concluded that the method is accurate and general in predicting plate flexures, and additional applications are suggested. An appendix is devoted t o computing procedures which evolved in the progress of the applications and which facilitate use of the method in conjunction with high-speed computing equipment.

Walton, William C., Jr.↗

NASA NTRS1960

Experimental Investigation of the Natural Frequencies of Liquids in Toroidal Tanks

Several toroidal configurations applicable to missile and space-vehicle liquid storage systems were oscillated to study the natural frequencies of the antisymmetric modes of contained liquids over a range of liquid depths and tank sizes. Natural frequencies for tank oscillations parallel to the free surface of both vertical and horizontal tank orientations. Natural frequencies were obtained. The data are presented in terms of dimensionless parameters which are obtained by relating experimentally determined natural liquid frequencies to analytical expressions developed through consideration of the physics of the problem and from existing solutions for liquids in tanks having similar boundaries at the liquid surface. The experimental results obtained for the toroids indicate that these parameters are applicable to the prediction of the natural frequencies of fluids in toroids of general geometry and size.

McCarty, John Locke↗