Search NASA⌕ Search

Engineering topics

Wan Wu

Publications and source records attributed to Wan Wu.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Hyperspectral Sounder Products: SiFSAP and ClimFiSP

Infrared hyperspectral sounders have demonstrated to provide very high value information for a range of weather and climate applications. Traditional retrieval algorithms of hyperspectral sounders use the ‘cloud clearing’ methodology in the retrieval process due to the lack of means to account for cloud scattering effect. The corresponding Level-2 data products are therefore limited by two major factors: the degradation of spatial resolution as compared with the native resolution of the instruments and the lack of ‘radiance closure’ that is critically needed for climate trend studies. The single field-of-view (FOV) sounder atmospheric products (SiFSAP) algorithm has been developed to supplement existing operational products. The SiFSAP algorithm uses the principal component based radiative transfer model (PCRTM) that is ultra-fast and has been extensively validated for the cloud scattering simulation capability. The cloud properties are physically retrieved along with profiles of temperature, moisture, and trace gases of interest, surface properties simultaneously by fitting single FOV spectral measurements. Therefore, SiFSAP ensure the radiometric consistency between the retrieved geophysical properties and the top-of-atmosphere (TOA) spectral measurements. This presentation provides a general introduction of SiFSAP and details about the physical retrieval algorithm. Also introduced here is a derivative data product of SiFSAP, the climate fingerprinting Sounder Products (ClimFiSP). ClimFiSP include the space-time averaged properties of key climate variables that are derived from the space-time averaged radiances via the spectral fingerprinting scheme. The spectral fingerprinting method allows a low latency data update on ClimFiSP following any potential calibration update on satellite measurements. ClimFiSP also include the rigorously defined uncertainty characterization for trends or anomalies of climate variables, being critical for the construction of long-term climate data record. Both SiFSAP and ClimFiSP will be available to users through NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC).

Wan Wu↗
NASA NTRSDate not supplied

Global Land Surface Soil Moisture Database Derived from IASI Measurements on Board MetOp Satellites

Global land surface soil moisture has been derived from MetOp IASI ultraspectral infrared measurements over the past 16 years. Monthly and spatially gridded soil moisture is produced to show some phenomena associated with its natural variability. This study has aimed to demonstrate that thermal infrared remote sensing data can be used for monitoring global surface environmental characteristics and associated change through the continuity observations provided by the MetOp series. The time-series of soil moisture can be used to estimate its associated trend.

Remote sensing↗
NASA NTRSDate not supplied

Analysis of CO Transport from Australia Fires and Its Impact to Ozone, Water Vapor and Clouds Using CrIS Single-Field-of-View Sounder Products and Other Remote Sensing and MERRA-2 Reanalysis Data

Australia’s unprecedented fire disasters at the end of 2019 to early 2020 emitted huge amounts of carbon monoxide (CO) and fire aerosol particles, and the long-range transport of the smoke plumes poses great impact to climate change, such as altering the Antarctic ozone (O3) hole. Spaceborne observations from satellites have been proven successful in monitoring CO from wildfires in the past decade and can be used to examine the associated CO transport. The primary remote sensing data used in this study is the Single Field of View (SFOV) Sounder Atmospheric Product (SiFSAP) derived from the Cross-track Infrared Sounder (CrIS) on SNPP, a new product that will be generated at NASA and released to the public in a few months. SiFSAP has a high spatial resolution of ~14 km and includes atmospheric profiles of temperature, water vapor, CO, O3, as well as cloud products, and as the SiFSAP algorithm performs both day- and night-time retrievals, it provides an additional observation for night-time in comparison to the day-time-only solar polar satellite instruments such as MOPPIT, OMPS, and TROPOMI. Most recent significant improvements in the quality of this product plus its good spatial resolution (better than most global weather and climate models) enable us to conduct process-oriented analysis of CO transport, and the variation of water vapor, O3 and clouds (optical depth, effective radius and cloud height) within and around the fire plumes. The wind fields from MERRA-2 reanalysis will be used to help characterize the transport. Other remote sensing data, such as CO from AIRS, MOPPIT and TROPOMI, O3 from OMPS and TROPOMI, as well as the UV aerosol index from OMI and OMPS, will be used and compared with SiFSAP sounder products. Cross-validation of CO and O3 from these different sensors with the corresponding MERRA-2 products will also be carried out. Along the plume transport path, some enhancement of O3 and correlation between fire aerosol, cloud optical depth and water vapor have been found but need further investigation. Using the transport of fire plumes over the Southern Pacific Ocean as a unique testbed, this study will demonstrate the trace species monitoring capability of current satellite observations, in particular, for CO and O3, and hopefully, it will provide some insight on the impacts on fire emissions on air quality and climate.

Xiaozhen (Shawn) Xiong↗
NASA NTRSDate not supplied

Developing a Spectral Correlation based Method for mitigating Angular Mismatch Effects in Intercalibration Using a Benchmark Hyperspectral Sensor

The CLARREO Pathfinder (CPF) mission will implement a state-of-the-art intercalibration method for transferring CPF’s in-orbit Système Internationale (SI)-traceable reference to the shortwave channel of the Clouds and the Earth’s Radiance Energy System (CERES) and the reflective solar bands of the Visible Infrared Imaging Radiometer Suite (VIIRS) aboard the NOAA-20 satellite platform with a targeted intercalibration methodology uncertainty of 0.3% (k=1). In order to achieve such a high intercalibration accuracy, the CPF intercalibration measurements to be scheduled need to closely match those from CERES and VIIRS in time, space, angles, and wavelength. Despite’s CPF’s two-axis pointing capability to match its boresight line of sight to that of a target sensor, there will be finite residual differences in angular samplings of the two instruments. The potential angular mismatch between CPF and the target sensors can introduce systematic errors in the intercalibration results, and therefore needs to be corrected using a rigorously designed algorithm. The CPF intercalibration team has been developing a correction method for mitigating the impact of these angular anisotropic effects in the CPF-VIIRS and CPF-CERES intercalibration. The method explores the spectral correlation relationship between the reflected solar radiances from the same surface target that would be measured by CPF at two adjacent angles. Our studies have shown that the spectral information based on CPF measurements can be used to accurately predict the spectral radiance or reflectance difference due to a given mismatch in the viewing and solar geometry. The hyper-spectral information can also be used to provide scene stratification without using any auxiliary data, which is critical to reduce the angular correction uncertainty. The angular correction relationship can be well established using simulated CPF-like top-of-atmosphere spectral radiances observed at all sorts of viewing geometry and solar angles and for different scenes. Intensive radiative transfer simulations have been completed using a state-of-art radiative transfer model developed by the CPF team members. The implementation of the algorithm on high-fidelity event simulation data and the characterization for the angular adjustment uncertainty will be presented.

Wan Wu↗
NASA NTRSDate not supplied

Spectral Gap Filling Method Using the Spectral Information from CLARREO-Pathfinder Measured Earth-Reflected Solar Spectra to Support CPF-CERES Intercalibration

The high-accuracy Earth-reflected solar spectral radiances from CLARREO Pathfinder (CPF) will serve as in-orbit benchmark measurements for intercalibrating other satellite imagers. The CPF team is developing a state-of-the-art intercalibration method to calibrate the shortwave channel (300-5000 nm) of the CERES instrument against the CPF reference with an uncertainty of 0.3%. Because the CPF instrument only covers spectral range from 350 nm to 2300 nm, the team has developed a spectral extension method to fill in the gaps between the spectral domains of CPF and the CERES shortwave channel. The method solely relies on using the hyperspectral information from the CPF wavelengths to predict the radiances below 350 nm and above 2300 nm. To quantify the relationship between the CPF spectrum and the non-overlapping portions of the spectrum between CPF and CERES, the team has simulated a large ensemble of spectra that cover the spectral range for both CPF and CERES. A hyperspectral bidirectional reflectance model for land surface based on thousands of measured land surface reflectance has been developed. This land surface model as well as the Cox-Munk model for ocean surface are used in the spectral gap filling. Various water/ice clouds, aerosols, atmosphere profiles and surfaces were used to simulate Earth-reflected radiances from 200 nm to 15 um under different solar and sensor geometries. The targeted uncertainty for the CPF-extended broadband CERES radiances is less than 0.1%. The previously derived training spectra were updated to replace the Kurucz solar irradiance model with the TSIS-1 Hybrid Solar Reference Spectrum. The influence of the scalar assumption in radiative transfer model equations on the uncertainty in estimating the broadband radiances was also investigated.

Hyperspectral↗
NASA NTRSDate not supplied

Fusion of Hyperspectral Sounder Products Via Spectral Fingerprinting Methodology

Satellite based measurements of top-of-atmosphere (TOA) spectral radiances in the infrared (IR) region have been in existence for almost two decades and are expected to be continued in the following decades. The data from multiple hyper-spectral IR sounders can therefore be combined to build a long-term data record to further global scale climate trend research. Challenges associated with the fusion of data from different sensors come from the stability and consistency requirement on the climate record. The direct radiance observations from different sounders need to be homogenized by reconciling the differences in calibration, spectral response function (SRF), and spatial-temporal sampling. When geophysical variables derived from radiances measured by different sounders are combined to form long-term climate records, the impacts of any inconsistencies between overlapping measurements on the retrieval must be carefully assessed in order to estimate the uncertainty of the corresponding climate anomalies/trends derived. This paper presents a novel climate fingerprinting methodology and establishes a rigorously-defined inverse relationship that allows us to efficiently evaluate the change in essential climate variables from the change in spectral radiances measured in prescribed spatial and temporal averaging scales. The inverse spectral fingerprinting relationship is constructed based on a unified spectral kernel scheme, providing a direct means for quantifying the potential discontinuity in the derived climate anomalies due to inconsistencies between overlapping measurements. We show in this paper a sample application of using the spectral fingerprinting scheme to derive long-term, global-scale surface temperatures from the Climate Hyperspectral Infrared Radiance Product (CHIRP) and quantify the inter-satellite biases.

Wan Wu↗
NASA NTRSDate not supplied

PyroCbs from Australia Fires and its Impact Using Satellite Observations from CrIS and TROPOMI and Reanalysis Data

Pyrocumulonimbus (pyroCb) clouds are thunder clouds created by intense heat from the Earth’s surface. They are formed similarly to cumulonimbus clouds, but the intense heat that results in the vigorous updraft comes from fire, either large wildfires or volcanic eruptions. Australia’s unprecedented fire disasters at the end of 2019 to early 2020 emitted huge amounts of carbon monoxide (CO) and fire aerosol particles to the atmosphere, particularly during the pyroCb outbreak that occurred in southeast Australia between 29 December 2019 and 4 January 2020. It was estimated that at least 18 pyroCbs were generated during this episode, and some of them injected ice, smoke, and biomass burning gases above the local tropopause. An unprecedented abundance of H2O and CO in the stratosphere, and the displacement of background ozone (O3) and N2O from rapid ascent of air from the troposphere and lower stratosphere were found from satellite observations. Some other studies also found that the fire emissions and their long-range transport resulted in stratospheric aerosol, temperature, and O3 anomalies after the 2020 Australian bushfires and altered the Antarctic ozone and vortex, posing great impact to local air quality and climate change. Further study on the atmospheric thermodynamic status of atmosphere associated with these pyroCbs, and the change of the cloud properties and trace gases during this unprecedented Australia fires will be made using a new single Field of View (SFOV) Sounder Atmospheric Products (SiFSAP). SiFSAP was developed by NASA using the Cross-track Infrared Sounder (CrIS) and Advanced Technology Microwave Sounder (ATMS) onboard SNPP and JPSS-1, and will soon be available to the public at NASA DAAC. Since this product has a spatial resolution of 15 km at nadir, which is better than most global weather and climate models and other current operational sounding products, a process-oriented analysis of the dynamic transport of CO and fire plumes during this unprecedented fire disasters will be made in this study. Based on a Principal Component Radiative Transfer Model (PCRTM) and an optimized estimation retrieval algorithm, a simultaneously retrieval is made using the whole spectral information measured by CrIS, and the derived SiFSAP include temperature, water vapor, trace gases (such as O3, CO2, CO, CH4 and N2O), cloud properties and surface properties. Use of ATMS together with CrIS allows SiFSAP to get accurate retrieval products under thick pyroCb conditions, and an algorithm to detect pyroCb based on the hyperspectral infrared sounder spectrum from CrIS will be developed and verified. In addition to SiFSAP sounding products, other products like CO, O3, NO2 from TROPOMI, O3 from OMPS will be used for retrospective analysis. The wind fields from the NASA’s Modern-Era Retrospective Analysis for Research and Applications Version-2 (MERRA-2) and ERA5 will be used to characterize the transport, and the SiFSAP temperature and water vapor profiles within and around pyroCbs will be compared with MERRA-2 and ERA5 products.

Xiaozhen (Shawn) Xiong↗
NASA NTRSDate not supplied

CLARREO Pathfinder as a SI-traceable Reference for Satellite Intercalibration

The Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder (CPF) consists of an Earthviewing reflected solar (RS) spectrometer that will measure the Earth-reflected solar radiation from International Space Station with an SI-traceable radiometric uncertainty of 0.3% (1-sigma). The high-accuracy CPF measurements will provide an in-orbit reference for intercalibrating other spaceflight RS instruments. The CPF intercalibration team has been tasked to develop a state-of-the-art approach to calibrate the shortwave channel (300-5000 nm) of the Clouds and the Earth’s Radiant Energy System (CERES) instrument and the reflective solar bands (RSB) of the Visible Infrared Imaging Radiometer Suite (VIIRS) instrument, both onboard the NOAA-20 satellite, against the CPF benchmark measurements. The aimed intercalibration methodology uncertainty for both the target instruments is also 0.3%. To meet this stringent intercalibration accuracy, the CPF team has developed methods for mitigating the impacts of spatial, spectral, and angular differences between the intercalibration footprints from the CPF and target instruments. To further alleviate uncertainty, the CPF team will employ Polarization Distribution Models (PDMs) to characterize the polarization state of the Earth-reflected radiance as a function of the intercalibration footprint scene type, solar and viewing geometry, and wavelength. The PDMs will assist in identifying low-polarized scene radiances for meticulously intercalibrating the polarization sensitive VIIRS instrument against the significantly-less polarization-sensitive CPF instrument. This paper will highlight the CPF mission overview, the details of the CPF intercalibration approach, and additional outcomes of the CPF intercalibration studies that may benefit the broader remote sensing community.community.

Hyperspectral↗
NASA NTRSDate not supplied

Homogenization of Satellite Based Hyperspectral Infrared Sounder Data To Build Long Term Climate Record

Building long term climate record using data from multiple hyperspectral Infrared (IR)sounders requires the homogenization of different data record to ensure the consistency andcontinuity. Such a requirement comes from two perspectives: 1) the need to adjust theoverlapping measurements of different sounders to ensure the radiometric consistency in thespectral radiance domain; 2) the need for a rigorously defined scheme to ensure the radiometricconsistency being transferred to the essential climate variables derived from the radiance record.We develop a solution that uses a spectral fingerprinting scheme to derive anomalies of keyclimate variables from long term spectral radiance data record constructed using both AIRS andCrIS observations aboard AQUA, SNPP and JPSS satellites. The fingerprinting scheme usescommon radiative kernels for all sounder measurements and therefore effectively avoids thealgorithm introduced inconsistency in retrieved geophysical variables. Our approach uses aunified sampling scheme to match AIRS and CrIS observations in both spectral and spatial-temporal domain, facilitating the intercomparison of spectral radiances from different sensors(platforms). The optimized liner inversion scheme allows the direct quantification and thereforethe adjustment for the impact on the derived climate anomalies imposed by potential radiometricinconsistency between the overlapping measurements. Such a scheme also enables the low-latency data processing of long term hyperspectral sounder data records. This paper provides a detailed introduction of the spectral fingerprinting methodology.Also introduced here is the climate fingerprinting Sounder Product (ClimFiSP) developed basedon the fingerprinting methodology. ClimFiSP products include the space-time averagedproperties of key climate variables that are derived from the long-term, space-time averagedradiances from AQUA-AIRS, SNPP-CrIS, and JPSS1-CrIS. ClimFiSP will be available to usersthrough NASA'sGoddard Earth Sciences Data and Information Services Center (GES DISC).

Wan Wu↗
NASA NTRSDate not supplied

Newly Available Single Field-of-view Sounder Atmospheric Product (SiFSAP) and Its Derivative Product

The Single Field-of-view Sounder Atmospheric product (SiFSAP) has been developed and delivered to NASA GES DISC. The SiFSAP Algorithm Theoretical Basis Documents (ATBD) and users manuals are ready to be released to public. This novel data product supplements other operational products such as AIRS version 7 and the Community Long-term Infrared Microwave Combined Atmospheric Product System (CLIMCAPS) from two main perspectives: 1) improving the spatial resolution of sounder Level-2 data to extend its usage in weather and dynamics focus area; 2) establishing radiance closure between Level-2 data and directly measured Level-1 radiances to facilitate the climate trend analysis. SiFSAP has 3-times higher spatial resolution and 9-times denser data products comparing to current NASA and NOAA operational IR sounder products. SiFSAP is derived using the optimal estimation method based physical retrieval algorithm. The Principal Component-based Radiative Transfer Model (PCRTM) which includes the cloud scattering simulation is used for the forward model so that the solution can fit the spectral radiances under all-sky conditions for individual single field-of-view (SFOV) measurements. A general introduction of the SiFSAP algorithm and corresponding validation work will be presented. Also introduced here is the Climate Fingerprinting Sounder product (ClimFiSP) that is the derivative product of SiFSAP and will be released in the near future. The ClimFiSP algorithm uses pre-constructed fingerprinting relationship to achieve a low-latency Level-3 data production and facilitate the fusion of data of different sounders.

Wan Wu↗
NASA NTRSDate not supplied

Development of An Improved BRDF Hotspot Model and its Use in VLIDORT to Study the Impact of Atmospheric Scattering on Hotspot Directional Signatures in the Atmosphere

The term “hotspot” refers to the sharp increase of reflectance occurring when incident (solar) and reflected (viewing) directions almost coincide in the backscatter direction. The accurate simulation of hotspot directional signatures is important for many remote sensing applications. The RossThick-LiSparse-Reciprocal (RTLSR) Bidirectional Reflectance Distribution Function (BRDF) model is widely used in radiative transfer simulations, and the hotspot model mostly used is from Maignan- Bréon but it typically requires large values of numerical quadrature and Fourier expansion terms in order to represent the hotspot accurately. To improve its use in atmospheric radiative transfer (RT) model simulations, in this paper we have developed a modified version based on the Maignan-Bréon’s hotspot BRDF model that converge much faster numerically, making it more practical for use in RT models that require Fourier expansion of BRDF to simulate the top-of-atmosphere (TOA) hotspot signatures. Using the vector linearized discrete ordinate radiative transfer model (VLIDORT), we found that reasonable TOA hotspot accuracy can be obtained with just 23 Fourier terms for clear atmospheres, and 63 Fourier terms for atmospheres with aerosol scattering. One advantage of this modified model is that the new hotspot model agrees very well with the original RossThick model away the hotspot region, making it is very convenient to use in the condition with and without hotspot in applications. This model can calculate the amplitude of hot spot accurately, and has been added in the most recent version of VLIDORT. However, there are some difference of this modified model with the original model for scattering angle close the hot spot, and it may not be appropriate for those who need an exact representation of the hot spot angular signature close to hot spot.

Xiaozhen (Shawn) Xiong↗
NASA NTRSDate not supplied

A Principal-Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Shortwave and Longwave Satellite Sensors and Its Applications

The radiative transfer model (RTM) or forward model is an essential component in satellite remote sensing. For modern hyperspectral remote sensors, fast and accurate RTMs are needed due to a large number of spectral dimensions and high spatial resolutions. We will describe a Principal Component-based radiative transfer model (PCRTM) which can simulate the top-of-atmosphere (TOA) radiance or reflectance spectra 250 nm to 2000 micrometers quickly and accurately. The PCRTM has been demonstrated to be extremely accurate, compared to the line-by-line RTM benchmarks, and the former is several orders more computationally efficient than the latter. We will demonstrate how the PCRTM and the associated inversion algorithms are used to infer atmospheric temperature, moisture, and trace gas profiles, as well as cloud and surface properties from hyperspectral IR sounders such as Atomspheric Infrared Souder (AIRS) and Cross-track Infrared Sounder (CrIS). High-quality climate records for a 20-year duration have been derived from these IR hyperspectral data. Finally, we will show some examples of using PCRTM to retrieve cloud properties from Earth Surface Mineral Dust Source Investigation (EMIT) and its applicability of PCRTM to future missions such as the CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF) CPF and the Surface Biology and Geology (SBG).

Xu Liu↗