Search NASA⌕ Search

Engineering topics

Wang, Bo

Publications and source records attributed to Wang, Bo.

At least 37 records · Page 2

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1- x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm –2 was reported in Zn 1-x Mg x O films. Here, ferroelectric Zn 1-x Mg x O is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices.

36 MATERIALS SCIENCE↗

Capturing the softening in T91 steel annealed with molten LBE through interfacial gradient plasticity

In order to study the effect of annealing with molten lead–bismuth eutectic alloy (mLBE) on the mechanical properties of T91 steel, micropillar compression tests were analyzed through the consideration of mechanical interface energy terms within gradient plasticity. The stress–strain curves of the micropillars showed significant stochastic effects, characterized by a different elastic and plastic behavior response for each pillar. Among the various pillars, some exhibited a similar trilinear behavior. Scanning electron microscopy (SEM) images of these specimens demonstrated localized slip deformation and slip planes after compression, while transmission electron microscopy (TEM) images showed the presence of a severe slip zone along the random grain boundaries (RGBs), indicating that the GBs played a dominant role in the deformation/slip. By employing interfacial gradient plasticity that can explicitly account for the presence of GBs, the trilinear response was captured, allowing for the determination of the mechanical interface parameter. As anticipated the pillars which underwent severe slip at the GBs had a lower value for the mechanical interface parameter. Finally, annealing with mLBE can, therefore, in some cases result in softening in the overall stress–strain, as it lowers the mechanical interface energy of GBs.

36 MATERIALS SCIENCE↗

Phase-field simulation of domain size effect on dielectric and piezoelectric responses in K 0.5 Na 0.5 NbO 3 epitaxial thin films with superdomain structures

Size effects of mesoscale ferroelectric domains on the macroscopic dielectric and piezoelectric responses in domain-engineered bulk piezocrystals have been extensively studied for more than two decades. However, less is known about the domain size effects in ferroelectric epitaxial thin films, especially for films consisting of low-symmetry ferroelectric phases and exhibits hierarchical superdomain structures. Herein, using phase-field simulations, we systemically evaluate the effective out-of-plane dielectric and piezoelectric coefficients, κ$^{*}_{33}$ and d$^{*}_{33}$, as a function of the domain periods for two types of superdomain structures in ferroelectric K 0.5 Na 0.5 NbO 3 epitaxial thin films. In one type of the superdomain structures, we find that more than 70% increase of κ$^{*}_{33}$ and nearly 20% increase of d$^{*}_{33}$ can be achieved by tuning the domain period by a few tens of nanometers. Dissimilar behaviors are found when the domain period varies along different lateral directions, suggesting anisotropic domain size effects in thin films. By analyzing the local dielectric and piezoelectric responses from each domain variants and domain walls, we reveal that the domain size effect is governed by the variation of out-of-plane polarization inside the domains. Moreover, we also demonstrate enhanced domain size effects by modulating the misfit strains and temperature to approach the polymorphic phase boundaries, suggesting tunability of the size effect by doping and strain engineering. Furthermore, our results reveal multimodal domain size dependence of dielectric and piezoelectric responses in low-symmetry ferroelectric epitaxial thin films, implying that domain size engineering can be used to tune macroscopic properties of thin-film ferroelectrics, similar to their bulk counterparts.

36 MATERIALS SCIENCE↗

Light-Driven Ultrafast Polarization Manipulation in a Relaxor Ferroelectric

Relaxor ferroelectrics have been intensely studied for decades based on their unique electromechanical responses which arise from local structural heterogeneity involving polar nanoregions or domains. Here, we report first studies of the ultrafast dynamics and reconfigurability of the polarization in freestanding films of the prototypical relaxor 0.68PbMg 1/3 Nb 2/3 O 3 -0.32PbTiO 3 (PMN-0.32PT) by probing its atomic-scale response via femtosecond-resolution, electron-scattering approaches. By combining these structural measurements with dynamic phase-field simulations, we show that femtosecond light pulses drive a change in both the magnitude and direction of the polarization vector within polar nanodomains on few-picosecond time scales. This study defines new opportunities for dynamic reconfigurable control of the polarization in nanoscale relaxor ferroelectrics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analytical and numerical modeling of optical second harmonic generation in anisotropic crystals using #SHAARP package

Electric-dipole optical second harmonic generation (SHG) is a second-order nonlinear process that is widely used as a sensitive probe to detect broken inversion symmetry and local polar order. Analytical modeling of the SHG polarimetry of a nonlinear optical material is essential to extract its point group symmetry and the absolute nonlinear susceptibilities. Current literature on SHG analysis involves numerous approximations and a wide range of (in)accuracies. We have developed an open-source package called the Second Harmonic Analysis of Anisotropic Rotational Polarimetry (#SHAARP.si) which derives analytical and numerical solutions of reflection SHG polarimetry from a single interface (.si) for bulk homogeneous crystals with arbitrary symmetry group, arbitrary crystal orientation, complex and anisotropic linear dielectric tensor with frequency dispersion, a general SHG tensor and arbitrary light polarization. #SHAARP.si enables accurate modeling of polarimetry measurements in reflection geometry from highly absorbing crystals or wedge-shaped transparent crystals. The package is extendable to multiple interfaces.

36 MATERIALS SCIENCE↗

Strain‐Driven Mixed‐Phase Domain Architectures and Topological Transitions in Pb 1− x Sr x TiO 3 Thin Films

Abstract The potential for creating hierarchical domain structures, or mixtures of energetically degenerate phases with distinct patterns that can be modified continually, in ferroelectric thin films offers a pathway to control their mesoscale structure beyond lattice‐mismatch strain with a substrate. Here, it is demonstrated that varying the strontium content provides deterministic strain‐driven control of hierarchical domain structures in Pb 1− x Sr x TiO 3 solid‐solution thin films wherein two types, c / a and a 1 / a 2 , of nanodomains can coexist. Combining phase‐field simulations, epitaxial thin‐film growth, detailed structural, domain, and physical‐property characterization, it is observed that the system undergoes a gradual transformation (with increasing strontium content) from droplet‐like a 1 / a 2 domains in a c / a domain matrix, to a connected‐labyrinth geometry of c / a domains, to a disconnected labyrinth structure of the same, and, finally, to droplet‐like c / a domains in an a 1 / a 2 domain matrix. A relationship between the different mixed‐phase modulation patterns and its topological nature is established. Annealing the connected‐labyrinth structure leads to domain coarsening forming distinctive regions of parallel c / a and a 1 / a 2 domain stripes, offering additional design flexibility. Finally, it is found that the connected‐labyrinth domain patterns exhibit the highest dielectric permittivity.

Kavle, Pravin↗

Q-POP-Thermo: A general-purpose thermodynamics solver for ferroelectric materials

We report that Q-POP-Thermo is a program designed to compute thermodynamic monodomain equilibrium states and their properties for ferroelectric single crystals and thin films based on the Landau-Ginzburg-Devonshire (LGD) Theory. Utilizing symbolic manipulation with the SymPy Library, the governing equations along with appropriate boundary conditions are solved for speedy minimization of the free energy of a crystal. Utilizing the popular Differential Evolution algorithm, with appropriate hybridization, multiple phase diagrams, such as the pressure-temperature phase diagram for bulk single crystals and the common strain-temperature phase diagram for monodomain thin-film systems can be readily generated. Furthermore, a variety of material properties of stable ferroelectric phases, including dielectric, piezoelectric, and electrocaloric properties, can simultaneously be calculated. Validation studies are presented for both thin-film and single crystal systems to test the effectiveness and capability of the open-source program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

13 C-Isotope-Assisted Assessment of Metabolic Quenching During Sample Collection from Suspension Cell Cultures

Metabolomics and fluxomics are core approaches to directly profile and interrogate cellular metabolism in response to various genetic or environmental perturbations. In order to accurately measure the abundance and isotope enrichment of intracellular metabolites, cell culture samples must be rapidly harvested and cold-quenched to preserve the in vivo metabolic state of the cells at the time of sample collection. When dealing with suspension cultures, this process is complicated by the need to separate the liquid culture media from cellular biomass prior to metabolite extraction. Here, we examine the efficacy of several commonly used metabolic quenching methods, using the model cyanobacterium Synechocystis sp. PCC 6803 as an example. Multiple 13 C-labeled compounds, including 13 C-bicarbonate, 13 C-glucose and 13 C-glutamine, were used as tracers during the sample collection and cold-quenching process to assess the extent of metabolic turnover after cells were harvested from culture flasks. We show that the combination of rapid filtration followed by 100% cold (–80°C) methanol quenching exhibits the highest quenching efficiency, while mixing cell samples with a partially frozen 30% methanol slurry (–24°C) followed by centrifugation is slightly less effective at quenching metabolism but enables less laborious sample processing. By contrast, rapidly mixing the cells with a saline ice slurry (~0°C) is less effective as indicated by high isotope-labeling rates after sample harvest, while mixing the cells with 60% cold methanol (–65°C) prior to centrifugation causes significant metabolite loss. Furthermore, this study demonstrates a rigorous, quantitative, and broadly applicable method for assessing the metabolic quenching efficacy of protocols used for sample collection in metabolomics and fluxomics studies.

59 BASIC BIOLOGICAL SCIENCES↗

High performance high-power textured Mn/Cu-doped PIN-PMN-PT ceramics

Piezoelectric ceramics with combinatory soft and hard characteristics are highly desired for high-power applications. However, it remains grand challenge to achieve simultaneous presence of hard (e.g. high coercive field, E c ; high mechanical quality factor, Q m ) and soft (e.g. high piezoelectric constant, d; high electromechanical coupling factor, k) piezoelectric properties in piezoelectric ceramics since the mechanism controlling the hard behavior (pinned domain walls) will significantly reduce the soft behavior. Here, we address this grand challenge and demonstrate <001> textured MnO 2 and CuO co-doped Pb(In 1/2 Nb 1/2 )O 3- Pb(Mg 1/3 Nb 2/3 )O 3- PbTiO 3 (PIN-PMN-PT) ceramics exhibiting ultrahigh combined soft and hard piezoelectric properties (d 33 = 713 pC N –1 , k 31 = 0.52, Q m ≈950, E c = 9.6 kV cm –1 , tan δ = 0.45%). The outstanding electromechanical properties are explained by considering composition/phase selection, crystallographic anisotropy and defect engineering. Phase-field model in conjunction with high resolution electron microscopy and diffraction techniques is utilized to delineate the contributions arising from intrinsic piezoelectric response, domain dynamics, and local structural heterogeneity. Furthermore, these results will have significant impact in the development of high-power transducers and actuators.

36 MATERIALS SCIENCE↗

Size-Dependent Chemomechanical Failure of Sulfide Solid Electrolyte Particles during Electrochemical Reaction with Lithium

The very high ionic conductivity of Li 10 GeP 2 S 12 (LGPS) solid electrolyte (SE) makes it a promising candidate SE for solid-state batteries in electrical vehicles. However, chemomechanical failure, whose mechanism remains unclear, has plagued its widespread applications. Here, we report in situ imaging lithiation-induced failure of LGPS SE. In this work, we revealed a strong size effect in the chemomechanical failure of LGPS particles: namely, when the particle size is greater than 3 μm, fracture/pulverization occurred; when the particle size is between 1 and 3 μm, microcracks emerged; when the particle size is less than 1 μm, no chemomechanical failure was observed. This strong size effect is interpreted by the interplay between elastic energy storage and dissipation. Our finding has important implications for the design of high-performance LGPS SE, for example, by reducing the particle size to less than 1 μm the chemomechanical failure of LGPS SE can be mitigated.

25 ENERGY STORAGE↗

Functional Adaptation of LPS-affected Dentoalveolar Fibrous Joints in Rats

We report the functional interplay between cementum of the root and alveolar bone of the socket is tuned by a uniquely positioned 70–80 µm wide fibrous and lubricious ligament in a dentoalveolar joint (DAJ). In this study, structural and biomechanical properties of the DAJ, periodontal ligament space (PDL-space also known as the joint space), alveolar bone of the socket, and cementum of the tooth root that govern the biomechanics of a lipopolysaccharide (LPS)-affected DAJ were mapped both in space and time. The hemi-maxillae from 20 rats (4 control at 6 weeks of age, 4 control and 4 LPS-affected at 12 weeks of age, 4 control and 4 LPS-affected at 16 weeks of age) were investigated using a hybrid technique; micro-X-ray computed tomography (5 µm resolution) in combination with biomechanical testing in situ. Temporal variations in bone and cementum volume fractions were evaluated. Trends in mineral apposition rates (MAR) in additional six Sprague Dawley rats (3 controls, 3 LPS-affected) were revealed by transforming spatial fluorochrome signals to functional growth rates (linearity factor - RW) of bone, dentin, and cementum using a fast Fourier transform on fluorochrome signals from 100-µm hemi-maxillae sections. An overall change in LPS-affected DAJ biomechanics (a 2.5–4.5X increase in tooth displacement and 2X tooth rotation at 6 weeks, no increase in displacement and a 7X increase in rotation at 12 weeks; 27% increase in bone effective strain at 6 weeks and 11% at 12 weeks relative to control) was associated with structural changes in the coronal regions of the DAJ (15% increase in PDL-space from 0 to 6 weeks but only 5% from 6 to 12 weeks compared to control). A significant increase (p < 0.05) in PDL-space between ligated and age-matched control was observed. The bone fraction of ligated at 12 weeks was significantly lower than its age-matched control, and no significant differences (p > 0.05) between groups were observed at 6 weeks. Cementum in the apical regions grew faster but nonlinearly (11% and 20% increase in cementum fraction (CF) at 6 and 12 weeks) compared to control. Alveolar bone revealed site-specific nonlinear growth with an overall increase in MAR (108.5 µm/week to 126.7 µm/week after LPS treatment) compared to dentin (28.3 µm/week in control vs. 26.1 µm/week in LPS-affected) and cementum (126.5 µm/week in control vs. 119.9 µm/week in LPS-affected). A significant increase in CF (p < 0.05) in ligated specimens was observed at 6 weeks of age. Anatomy-specific responses of cementum and bone to the mechano-chemo stimuli, and their collective temporal contribution to observed changes in PDL-space were perpetuated by altered tooth movement. Data highlight the “resilience” of DAJ function through the predominance of nonlinear growth response of cementum, changes in PDL-space, and bone architecture. Despite the significant differences in bone and cementum architectures, data provided insights into the reactionary effects of cementum as a built-in compensatory mechanism to reestablish functional competence of the DAJ. The spatial shifts in architectures of alveolar bone and cementum, and consequently ligament space, highlight adaptations farther away from the site of insult, which also is another novel insight from this study. These adaptations when correlated within the context of joint function (biomechanics) illustrate that they are indeed necessary to sustain DAJ function albeit being pathological.

60 APPLIED LIFE SCIENCES↗

Microscopic piezoelectric behavior of clamped and membrane (001) PMN-30PT thin films

Bulk single-crystal relaxor-ferroelectrics, like Pb(Mg 1/3 Nb 2/3 )O- 3 -PbTiO 3 (PMN-PT), are widely known for their large piezoelectricity. This is attributed to polarization rotation, which is facilitated by the presence of various crystal symmetries for compositions near a morphotropic phase boundary. Relaxor-ferroelectric thin films, which are necessary for low-voltage applications, suffer a reduction in their piezoelectric response due to clamping by the passive substrate. To understand the microscopic behavior of this adverse phenomenon, we employ the AC electric field driven in-operando synchrotron x-ray diffraction on patterned device structures to investigate the piezoelectric domain behavior under an electric field for both a clamped (001) PMN-PT thin film on Si and a (001) PMN-PT membrane released from its substrate. In the clamped film, the substrate inhibits the field-induced rhombohedral (R) to tetragonal (T) phase transition resulting in a reversible R to Monoclinic (M) transition with a reduced longitudinal piezoelectric coefficient d 33 < 100 pm/V. Releasing the film from the substrate results in recovery of the R to T transition and results in a d 33 > 1000 pm/V. Here, using diffraction with spatial mapping, we find that lateral constraints imposed by the boundary between the active and inactive materials also inhibit the R to T transition. Phase-field calculations on both clamped and released PMN-PT thin films simulate our experimental findings. Resolving the suppression of thin film piezoelectric response is critical to their application in piezo-driven technologies.

36 MATERIALS SCIENCE↗

Low-voltage magnetoelectric coupling in membrane heterostructures

Strain-mediated magnetoelectric (ME) coupling in ferroelectric (FE)/ferromagnetic (FM) heterostructures offers a unique opportunity for both fundamental scientific research and low-power multifunctional devices. Relaxor-FEs, such as (1-x)Pb(Mg 1/3 Nb 2/3 )O 3 -(x)PbTiO 3 (PMN-xPT), are ideal FE layer candidates because of their giant piezoelectricity. However, thin films of PMN-PT suffer from substrate clamping, which substantially reduces piezoelectric in-plane strains. Here, we demonstrate low-voltage ME coupling in an all-thin-film heterostructure that uses the anisotropic strains induced by the (011) orientation of PMN-PT. We completely remove PMN-PT films from their substrate and couple with FM Ni overlayers to create membrane PMN-PT/Ni heterostructures showing 90° Ni magnetization rotation with 3 V PMN-PT bias, much less than the bulk PMN-PT ~100-V requirement. Scanning transmission electron microscopy and phase-field simulations clarify the membrane response. These results provide a crucial step toward understanding the microstructural behavior of PMN-PT thin films for use in piezo-driven ME heterostructures.

36 MATERIALS SCIENCE↗

The pesticide chlorpyrifos promotes obesity by inhibiting diet-induced thermogenesis in brown adipose tissue

Obesity results from a caloric imbalance between energy intake, absorption and expenditure. In both rodents and humans, diet-induced thermogenesis contributes to energy expenditure and involves the activation of brown adipose tissue (BAT). We hypothesize that environmental toxicants commonly used as food additives or pesticides might reduce BAT thermogenesis through suppression of uncoupling protein 1 (UCP1) and this may contribute to the development of obesity. Using a step-wise screening approach, we discover that the organophosphate insecticide chlorpyrifos suppresses UCP1 and mitochondrial respiration in BAT at concentrations as low as 1 pM. In mice housed at thermoneutrality and fed a high-fat diet, chlorpyrifos impairs BAT mitochondrial function and diet-induced thermogenesis, promoting greater obesity, non-alcoholic fatty liver disease (NAFLD) and insulin resistance. This is associated with reductions in cAMP; activation of p38MAPK and AMPK; protein kinases critical for maintaining UCP1 and mitophagy, respectively in BAT. These data indicate that the commonly used pesticide chlorpyrifos, suppresses diet-induced thermogenesis and the activation of BAT, suggesting its use may contribute to the obesity epidemic.

59 BASIC BIOLOGICAL SCIENCES↗