Boron–Silicon Alloy Nanoparticles as a Promising New Material in Lithium-Ion Battery Anodes
Not Available
25 ENERGY STORAGE↗
Engineering topics
Wang, Chongmin
Publications and source records attributed to Wang, Chongmin.
In-situ HRTEM observations of intermediate phase transformation in lattice reorientation in HCP rhenium
In-situ high-resolution transmission electron microscopy (HRTEM) is performed to investigate the deformation behavior of hexagonal close-packed rhenium (Re) which is compressed along the $\langle1\overline{1}00\rangle$ direction. Atomistic simulations are also conducted to better understand the deformation mechanisms. Two types of lattice reorientation are observed during compression. The first type involves the reorientation of one lattice by ~90° around $\langle1\overline{1}00\rangle$, which is accomplished by the formation of an intermediate face-center-cubic (FCC) phase at the interface. This transformation sequence can be described as {$1\overline{1}00$} matrix → {$111$} FCC → ($0001$) twin . In the second type, a new grain is formed but does not satisfy any known twin relationship with the matrix, and an intermediate FCC phase is also formed. The transformation sequence can be described as {$1\overline{1}00$} matrix → {$111$} FCC → ($0001$) grain . Mechanisms responsible for the observed lattice reorientation and sequential phase transitions are analyzed by conducting lattice correspondence analyses on the simulation results. Strain accommodation is also analyzed to explain the mechanisms for lattice reorientation and the intermediate phase transformations. In conclusion, the results provide new insight into the deformation behavior of HCP metals
36 MATERIALS SCIENCE↗
Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li 1.2 Ni 0.2 Mn 0.6 O 2 Cathode
Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathode of Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 with an octahedral morphology of (102) and (003) dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathode. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions, but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single crystal surfaces, more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to the stabilization of surface oxygens. In conclusion, this study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulted phase formation in the rather less explored micron-sized octahedral Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 single crystals, which is key to further exploration of electrochemical properties of cathode in the form of micro-sized single crystal.
25 ENERGY STORAGE↗
Extending Calendar Life of Si-Based Lithium-Ion Batteries by a Localized High Concentration Electrolyte
Silicon (Si) is one of the most promising anode materials for the next generation lithium-ion batteries (LIBs). Although significant progresses have been made on the cycle life of Si-based LIBs, their calendar-life is still far less than those required for electrical vehicle applications. Here, in this work, the fundamental mechanisms behind the limited calendar life of Si-LIBs have been investigated. It is found that the unstable interphase layers formed on electrodes during the formation/cycling of batteries using conventional electrolyte with fluoroethylene carbonate (FEC) additive are responsible for the rapid impedance-increase of Si-LIBs during storage at elevated temperature (55°C). By using an FEC-free localized high concentration electrolyte (lithium bis(fluorosulfonyl)imide:ethyl propionate:ethylene carbonate:1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (1:2.8:0.2:1 by mol.) with 1 wt.% lithium difluorophosphate), stable interphase layers formed on electrodes can effectively block the crosstalk between cathode and anode, minimize the impedance increase of Si||LiNi 0.6 Mn 0.2 Co 0.2 (NMC622) batteries during storage at elevated temperature (55°C), therefore largely improve their calendar life. Si||NMC622 batteries using this electrolyte also demonstrated a high-capacity retention of ~92.4% after 500 cycles at 45°C with well-preserved electrode structure. Hence, this novel electrolyte is a good candidate to extend the cycling life and calendar life of Si-LIBs.
25 ENERGY STORAGE↗
Nano Scale Poly(vinylidene chloride-co-acrylonitrile) Protection for Reversible and Stable Mg Anode Interface
This study investigates the efficacy of a polymer coating, PVdC-co-AN, in enhancing the stability and reversibility of the electrochemical Mg anode interface. Coated electrodes, immersed in a 0.25 M Mg(TFSI) 2 −0.50 M MgCl 2 /dimethoxyethane (DME) electrolyte, exhibit notable improvements. Cyclic voltammetry demonstrates consistent behavior with the coated electrode, while the uncoated electrode changes dramatically. During extended open circuit potential conditions, the coated electrode maintains much higher coulombic efficiency (93%) compared to the uncoated electrode (62%). Galvanostatic cycling test over 200 cycles further show the benefits of the PVdC-co-AN coating, decreasing the overpotential of Mg plating and improving long-term stability. The coated electrodes also demonstrate improved rate capability at higher current densities. Surface analysis reveals differences in the formation of byproducts between the coated and uncoated electrodes, indicating a more stable and uniform interface in the former. Nuclear magnetic resonance (NMR) spectroscopy suggests that the polymer influences ion mobility through tuning the solvation environments which results in better kinetics and fewer byproducts. In summary, the study affirms that the PVdC-co-AN coating significantly improves the stability and performance of Mg electrochemistry, offering a promising advancement for practical battery applications.
25 ENERGY STORAGE↗
Surface and Bulk Stabilization of Silicon Anodes with Mixed-Multivalent Additives: Ca(TFSI) 2 and Mg(TFSI) 2
Here, silicon is drawing attention as the upcoming anode material for the next generation of lithium-ion batteries due to its higher capacity compared to commercial graphite. However, silicon anions formed during lithiation are highly reactive with binder and electrolyte components creating an unstable SEI layer and limiting the calendar life of silicon anodes. The reactivity of lithium silicide and the formation of an unstable SEI layer is mitigated by utilizing the use of a mixture of Ca and Mg multivalent cations as an electrolyte additive for Si anodes to improve their calendar life. The effect of mixed salts on the bulk and surface of silicon anodes was studied by multiple structural characterization techniques. Ca and Mg ions in the electrolyte formed relatively thermodynamically stable quaternary Li-Ca-Mg-Si Zintl phases in an in-situ fashion and more stable and denser SEI layer on the Si particles. These in turn protect silicon particles against side reactions with electrolytes in a coin cell. The full cell with the mixed cation electrolyte demonstrates enhanced calendar life performance with lower measured current and current leakage than that of the baseline electrolyte due to reduced side reactions. Electron Microscopy, HRXRD, and solid-state NMR results showed that electrodes with mixed cations tended to have less cracking on the electrode surface compared to Si electrodes with Gen2 + FEC and the presence of mixed cations enhances cation migration and formation of quaternary Zintl phases stabilizing bulk and forming a more stable SEI.
25 ENERGY STORAGE↗
In situ observation of the atomic shuffles during the {${{11}}\bar{{{2}}}{{1}}$} twinning in hexagonal close-packed rhenium
Twinning, on par with dislocations, is critically required in plastic deformation of hexagonal close-packed crystals at low temperatures. In contrast to that in cubic-structured crystals, twinning in hexagonal close-packed crystals requires atomic shuffles in addition to shear. Though the twinning shear that is carried by twinning dislocations has been captured for decades, direct experimental observation of the atomic shuffles, especially when the shuffling mode is not unique and does not confine to the plane of shear, remains a formidable challenge to date. Here, by using in-situ transmission electron microscopy, we directly capture the atomic mechanism of the {${{11}}\bar{{{2}}}{{1}}$} twinning in hexagonal close packed rhenium nanocrystals. Results show that the {${{11}}\bar{{{2}}}{{1}}$} twinning is dominated by the ($\textbf{b}$ 1/2 , h 1/2 ) twinning disconnections. In contrast to conventional expectations, the atomic shuffles accompanying the twinning disconnections proceed on alternative basal planes along 1/6 {${{1\bar1}}{{{0}}}{{0}}$} , which may be attributed to the free surface in nanocrystal samples, leading to a lack of mirror symmetry across the {${{11}}\bar{{{2}}}{{1}}$} twin boundary.
(S)TEM↗
Publisher Correction: Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations
In the version of the article initially published, the x axes in Figs. 2b,d and 5a,b originally read “T -1 (K -1 )” and have now been amended to “1000 T -1 (K -1 )” in the HTML and PDF versions of the article.
36 MATERIALS SCIENCE↗
Engineered $\mathrm{Ru}$ on $\mathrm{HY}$ zeolite catalyst for continuous and selective hydrodeoxygenation of lignin phenolics to cycloalkanes under moderate conditions
Here we report a continuous selective hydrodeoxygenation (HDO) process of guaiacol conversion to cycloalkanes under 180 °C/1 MPa, which results in improved HDO chemistry for lignin-based jet fuel production. The incipient wetness impregnation method was modified to prepare an HY zeolite-supported Ru catalyst with better metal dispersion and acid site uniformity, which overcomes the low conversion and selectivity of previous literature. The modified catalyst (Ru-HY-60-MI) was tested in a continuous fixed bed reactor, resulting in increased HDO conversion of guaiacol to cycloalkanes compared to the unmodified catalyst. Pressure, temperature, and weight hourly space velocity-dependent tests validate guaiacol HDO over Ru-HY-60-MI catalyzed ring hydrogenation of guaiacol to 2-methoxycyclohexanol, acid-catalyzed demethoxylation and dehydration to cyclohexene, and further hydrogenation of cyclohexene to cyclohexane. These experiments enable exploring a continuous HDO process, demonstrate effectiveness for other ß-ß and a-O-4 lignin representatives and real lignin bio-oil, and pave the way towards commercialization of lignin-based jet fuel
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fluorination Effect on Lithium- and Manganese-Rich Layered Oxide Cathodes
Not Available
25 ENERGY STORAGE↗
Three-Dimensional Polymeric-Scaffold-Based Current Collector for a Lithium Metal Anode toward High-Energy-Density Batteries
Here, the practical applications of high-energy-density rechargeable lithium (Li) metal batteries (LMBs) have been impeded by the intrinsic issues of the Li metal anode (LMA) including high reactivity with electrolyte and dendritic formation. Conventional LMAs, which have the "hostless" feature consisting of a Li layer on a two-dimensional copper (Cu) foil as a current collector, led to additional loss in specific energy density, since Cu is a nonfaradaic heavy metal, bringing formidable areal capacity loss. To address these problems, a heat-treated three-dimensional-structured Cu-coated polyimide (HT-Cu@PI) membrane is designed and fabricated as a current collector. Benefiting from this unique material/structure, it enables not only better electrochemically deposited Li by a uniform/continuous Li-ion transport pathway but also a significant increase in the gravimetric/volumetric energy densities of LMBs by allowing more Li deposition in a fixed weight/volume. Therefore, this new LMA structure will accelerate the practical application of high-energy-density LMBs.
25 ENERGY STORAGE↗
Unlocking Li superionic conductivity in face-centred cubic oxides via face-sharing configurations
Oxides with a face-centred cubic (fcc) anion sublattice are generally not considered as solid-state electrolytes as the structural framework is thought to be unfavourable for lithium (Li) superionic conduction. Here we demonstrate Li superionic conductivity in fcc-type oxides in which face-sharing Li configurations have been created through cation over-stoichiometry in rocksalt-type lattices via excess Li. We find that the face-sharing Li configurations create a novel spinel with unconventional stoichiometry and raise the energy of Li, thereby promoting fast Li-ion conduction. The over-stoichiometric Li–In–Sn–O compound exhibits a total Li superionic conductivity of 3.38 × 10 -4 S cm -1 at room temperature with a low migration barrier of 255 meV. Our work unlocks the potential of designing Li superionic conductors in a prototypical structural framework with vast chemical flexibility, providing fertile ground for discovering new solid-state electrolytes.
36 MATERIALS SCIENCE↗
Direct Mapping of Fluorine in Cation Disordered Rocksalt Cathodes
Cation-disordered rocksalt (DRX) oxides are promising candidates as next-generation cathodes for lithium-ion batteries. Partial fluorination of the DRX oxides enhances their cyclability. However, the lattice position, concentration, and spatial distribution of fluorine within DRX lattices remain elusive. Here, in this work, we use atom location by channeling-enhanced microanalysis, energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy, and integrated differential phase contrast imaging in a scanning transmission electron microscope to gain atomic-level insights into DRX with nominal composition of Li 1.2 Mn 0.7 Ti 0.1 O 1.7 F 0.3 and Li 1.15 Ni 0.45 Ti 0.3 Mo 0.1 O 1.85 F 0.15 . We reveal that fluorine substitutes oxygen in the DRX lattices. The O/F ratio in terms of O+F = 2 is in the range from 1.92:0.08 to 1.82:0.18. Spatially, fluorine is distributed in the proximity of the Li-rich regions but distinct from lithium fluoride. Additionally, we observe that incorporation of fluorine in the DRX lattice induces a larger variation in cation–anion separation. These observations provide insight into the guided design of oxyfluoride DRX cathodes for high-performance batteries.
(S)TEM↗
Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries
Spinel-structured LiNi x Mn 2-x O 4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn 3 O 4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.
25 ENERGY STORAGE↗
Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes
Previous studies have demonstrated that chemical vapor deposition carbon coating on silicon (Si@C) can enhance the electrochemical performance of lithium-ion batteries with Si-based anodes. However, the underlying mechanisms contributing to this improvement have not been fully explored. Here, we address this knowledge gap by applying a suite of characterization methods to evaluate Si@C anodes prepared by reducing acetylene on ball-milled Si particles. Raman mapping measurements show that the C coating (<5 nm thick) enables a homogeneous Si and carbon distribution during the slurry casting process, thereby promoting Si utilization during cycling. The coating’s microstructure and morphology were evaluated using X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy, and neutron reflectivity experiments. Electrochemical impedance spectroscopy measurements upon cycling indicate that carbon coating also reduces the overall resistance as benchmarked against bare Si anodes. Galvanostatic cycling in half-cell studies revealed higher initial Coulombic efficiency and specific capacities with increasing carbon coating time. However, solid electrolyte interphase (SEI) investigations using XPS showed that the coated and uncoated samples have very similar characteristics, suggesting that the SEI may only play a minor role in enhancing the performance of Si@C. Full-cell evaluation of the Si electrodes was consistent with half-cell results relating to performance and SEI properties, further supporting the conclusion that electronic and ionic percolation, enabled by effective electrode manufacturing, are the dominant factors contributing to the favorable performance of Si@C.
25 ENERGY STORAGE↗
Utilizing Conjugated Imine Polymers to Stabilize Nanoparticle Silicon Anodes
Silicon anodes provide a compelling route towards delivering high-capacity lithium-ion batteries, however they are notoriously difficult to stabilize in conventional liquid electrolytes that are compatible with high performance cathodes. Furthermore, the drastic changes in volume that occur as silicon is lithiated and delithiated can lead to rapid cell failure and novel polymeric binders are known to help mitigate mechanical issues. We have recently developed a novel method to synthesize the conjugated polymer phenylmethylimine (polyPMI) using an imine metathesis reaction. We have demonstrated that this polymer can be used to stabilize silicon nanoparticles to produce a composite lithium-ion battery anode that is electrochemically stable for hundreds of lithiation and delithiation cycles with a Coulombic efficiency that is greater than 99.95% in a traditional carbonate liquid electrolyte. This work covers the structure and properties of polyPMI within the context of the unique mechanical and electrochemical requirements of nanoparticle silicon anodes. The electrochemical behavior of this polymer also offers new opportunities as an organic lithium-coordinating material that can be used to stabilize a variety of other battery electrodes. More broadly, we posit that this solution-processed, ionically conductive, and electronically conductive polymer is applicable for a variety of energy storage and conversion technologies. Finally, this work demonstrates how this novel polymer chemistry provides additional opportunities for tuning electrode architecture to target high energy full cells.
conjugated polymers↗
Direct in situ measurements of electrical properties of solid–electrolyte interphase on lithium metal anodes
The solid–electrolyte interphase (SEI) critically governs the performance of rechargeable batteries. An ideal SEI is expected to be electrically insulative to prevent persistently parasitic reactions between the electrode and the electrolyte and ionically conductive to facilitate Faradaic reactions of the electrode. However, the true nature of the electrical properties of the SEI remains hitherto unclear due to the lack of a direct characterization method. Here we use in situ bias transmission electron microscopy to directly measure the electrical properties of SEIs formed on copper and lithium substrates. We reveal that SEIs show a voltage-dependent differential conductance. A higher rate of differential conductance induces a thicker SEI with an intricate topographic feature, leading to an inferior Coulombic efficiency and cycling stability in Li||Cu and Li||LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells. Further, our work provides insight into the targeted design of the SEI with desired characteristics towards better battery performance.
25 ENERGY STORAGE↗
Dynamic Molecular Investigation of the Solid-Electrolyte Interphase of an Anode-Free Lithium Metal Battery Using In Situ Liquid SIMS and Cryo-TEM
Solid electrolyte interphase (SEI) has been widely perceived to play a critical role in the stable cycling of rechargeable batteries. However, associated with the fragile and air-sensitive nature of the SEI layer, delineation of the formation process and the nature of SEI remains a big challenge. Here, we use in situ liquid time-of-flight secondary ion mass spectroscopy (TOF-SIMS), cryo- transmission electron microscope (TEM) and density functional theory (DFT) calculation to delineate molecular process on the formation of SEI layer under the dynamic operating condition. We discover that the onset potential for SEI layer formation and the thickness of the SEI show dependence on the solvation shell structure. Using LiCoO 2 as a cathode and Cu film as an anode, the SEI is noticed to start to form at around 2.0 V and reach its final thickness (irreversible part, ~ 40-50 nm) at about 3.0 V in the 1 M LiPF 6 –EC/DMC electrolyte, while for the case of 1 M LiFSI–DME, the SEI starts to form at around 1.5 V and reaches its final thickness (~ 20 nm) at about 2.0 V. The in situ TOF-SIMS clearly indicates the outer SEI layer formation and dissipation upon charging and discharging, implying a continued evolution of electrolyte structure with extended cycling. In conclusion, the present work establishes a direct correlation between the molecular signature of SEI layer with solvation feature of electrolytes in lithium batteries, providing insights for tailoring SEI layer toward improved electrochemical properties of lithium batteries.
25 ENERGY STORAGE↗